![](http://datasheet.mmic.net.cn/370000/UPD70F3214HGC-8EU_datasheet_16743828/UPD70F3214HGC-8EU_7.png)
User’s Manual U16890EJ1V0UD
7
To find the details of a register where the name is known
→
Refer to
APPENDIX C REGISTER INDEX
.
To understand the details of an instruction function
→
Refer to the
V850ES Architecture User’s Manual
.
Register format
→
The name of the bit whose number is in angle brackets (<>) in the figure of the
register format of each register is defined as a reserved word in the device file.
To understand the overall functions of the V850ES/KG1
→
Read this manual according to the
CONTENTS
.
To know the electrical specifications of the V850ES/KG1
→
Refer to
CHAPTER 28 ELECTRICAL SPECIFICATIONS (MASK ROM VERSION
OF 256 KB AND SINGLE-POWER FLASH MEMORY VERSION) (TARGET)
,
CHAPTER
29 ELECTRICAL SPECIFICATIONS (STANDARD PRODUCTS (MASK ROM
VERSION OF 128 KB OR LESS AND TWO-POWER FLASH MEMORY VERSION)
,
(A)
GRADE PRODUCTS)
,
CHAPTER 30 ELECTRICAL SPECIFICATIONS ((A1) GRADE
PRODUCTS) (TARGET)
, and
CHAPTER 31 ELECTRICAL SPECIFICATIONS ((A2)
GRADE PRODUCTS) (TARGET)
.
The “yyy bit of the xxx register” is described as the “xxx.yyy bit” in this manual. Note with
caution that if “xxx.yyy” is described as is in a program, however, the compiler/assembler
cannot recognize it correctly.
Conventions
Data significance:
Active low representation: xxx (overscore over pin or signal name)
Memory map address:
Higher addresses on the top and lower addresses on the bottom
Note
:
Footnote for item marked with
Note
in the text
Caution
:
Information requiring particular attention
Remark
:
Supplementary information
Numeric representation: Binary
... xxxx or xxxxB
Decimal
... xxxx
Hexadecimal
... xxxxH
Prefix indicating power of 2 (address space, memory capacity):
K (kilo):
2
M (mega): 2
G (giga): 2
Higher digits on the left and lower digits on the right
10
= 1,024
20
= 1,024
2
30
= 1,024
3