參數資料
型號： MB9AF312MPMC
元件分類： 微控制器/微處理器
英文描述： 32-BIT, FLASH, 40 MHz, RISC MICROCONTROLLER, PQFP80
封裝： 0.50 MM PITCH, PLASTIC, LQFP-80
文件頁數： 87/114頁
文件大?。?/td> 1357K
代理商： MB9AF312MPMC
ATmega48PA/88PA/168PA [DATASHEET]
9223F–AVR–04/14
74
14.3.2 Alternate Functions of Port C
The Port C pins with alternate functions are shown in Table 14-6.
The alternate pin configuration is as follows:
RESET/PCINT14 – Port C, Bit 6
RESET, reset pin: When the RSTDISBL fuse is programmed, this pin functions as a normal I/O pin, and the part will have to
rely on power-on reset and brown-out reset as its reset sources. When the RSTDISBL fuse is unprogrammed, the reset
circuitry is connected to the pin, and the pin can not be used as an I/O pin.
If PC6 is used as a reset pin, DDC6, PORTC6 and PINC6 will all read 0.
PCINT14: Pin change interrupt source 14. The PC6 pin can serve as an external interrupt source.
SCL/ADC5/PCINT13 – Port C, Bit 5
SCL, 2-wire Serial Interface Clock: When the TWEN bit in TWCR is set (one) to enable the 2-wire Serial Interface, pin PC5 is
disconnected from the port and becomes the Serial Clock I/O pin for the 2-wire Serial Interface. In this mode, there is a spike
filter on the pin to suppress spikes shorter than 50 ns on the input signal, and the pin is driven by an open drain driver with
slew-rate limitation.
PC5 can also be used as ADC input Channel 5. Note that ADC input channel 5 uses digital power.
PCINT13: Pin change interrupt source 13. The PC5 pin can serve as an external interrupt source.
SDA/ADC4/PCINT12 – Port C, Bit 4
SDA, 2-wire serial interface data: When the TWEN bit in TWCR is set (one) to enable the 2-wire serial interface, pin PC4 is
disconnected from the port and becomes the serial data I/O pin for the 2-wire serial interface. In this mode, there is a spike
filter on the pin to suppress spikes shorter than 50 ns on the input signal, and the pin is driven by an open drain driver with
slew-rate limitation.
PC4 can also be used as ADC input channel 4. Note that ADC input channel 4 uses digital power.
PCINT12: Pin change interrupt source 12. The PC4 pin can serve as an external interrupt source.
Table 14-6. Port C Pins Alternate Functions
Port Pin
Alternate Function
PC6
RESET (reset pin)
PCINT14 (pin change interrupt 14)
PC5
ADC5 (ADC input channel 5)
SCL (2-wire serial bus clock line)
PCINT13 (pin change interrupt 13)
PC4
ADC4 (ADC input channel 4)
SDA (2-wire Serial bus data input/output line)
PCINT12 (pin change interrupt 12)
PC3
ADC3 (ADC input channel 3)
PCINT11 (pin change interrupt 11)
PC2
ADC2 (ADC input channel 2)
PCINT10 (pin change interrupt 10)
PC1
ADC1 (ADC input channel 1)
PCINT9 (pin change interrupt 9)
PC0
ADC0 (ADC input channel 0)
PCINT8 (pin change interrupt 8)
相關PDF資料
PDF描述
MB9AF312LPMC 32-BIT, FLASH, 40 MHz, RISC MICROCONTROLLER, PQFP64
MB9AF311NPMC 32-BIT, FLASH, 40 MHz, RISC MICROCONTROLLER, PQFP100
MB9AF316NPMC RISC MICROCONTROLLER, PQFP100
MB9AF314NPMC RISC MICROCONTROLLER, PQFP100
MB9AF312NPF RISC MICROCONTROLLER, PQFP100
相關代理商/技術參數
參數描述
MB9AF314LAPMC1-G-JNE2 制造商:FUJITSU 功能描述:
MB9AF314LAPMC-G-JNE2 制造商:Fujitsu 功能描述:Bulk
MB9AF314LAQN-G-AVE2 功能描述:ARM? Cortex?-M3 FM3 MB9A310A Microcontroller IC 32-Bit 40MHz 256KB (256K x 8) FLASH 64-QFN Exposed Pad (9x9) 制造商:cypress semiconductor corp 系列:FM3 MB9A310A 包裝:托盤 零件狀態:有效 核心處理器:ARM? Cortex?-M3 核心尺寸:32-位 速度:40MHz 連接性:CSIO，I2C，LIN，UART/USART，USB 外設:DMA，LVD，POR，PWM，WDT I/O 數:51 程序存儲容量:256KB（256K x 8） 程序存儲器類型:閃存 EEPROM 容量:- RAM 容量:32K x 8 電壓 - 電源（Vcc/Vdd）:2.7 V ~ 5.5 V 數據轉換器:A/D 9x12b 振蕩器類型:內部 工作溫度:-40°C ~ 105°C（TA） 封裝/外殼:64-VFQFN 裸露焊盤 供應商器件封裝:64-QFN 裸露焊盤（9x9） 標準包裝:260
MB9AF314LPMC1-ESE1 制造商:FUJITSU 功能描述:
MB9AF314LPMC1-GE1 制造商:FUJITSU 功能描述:
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*