參數資料
型號: DS3141+
廠商: Maxim Integrated Products
文件頁數: 22/88頁
文件大小: 0K
描述: IC FRAMER DS3/E3 SNGL 144CSBGA
產品培訓模塊: Lead (SnPb) Finish for COTS
Obsolescence Mitigation Program
標準包裝: 160
控制器類型: DS3/E3 調幀器
接口: LIU
電源電壓: 3.135 V ~ 3.465 V
電流 - 電源: 80mA
工作溫度: -40°C ~ 85°C
安裝類型: 表面貼裝
封裝/外殼: 144-BGA,CSPBGA
供應商設備封裝: 144-TECSBGA(13x13)
包裝: 托盤
DS3141/DS3142/DS3143/DS3144 Single/Dual/Triple/Quad DS3/E3 Framers
29 of 88
Register Name:
MSRL
Register Description:
Master Status Register Latched
Register Address:
09h
Bit #
7
6
5
4
3
2
1
0
Name
LORCL
LOTCL
N/A
COVFL
OSTL
Default
Note: See Figure 7-4 for details on the interrupt logic for the status bits in the MSRL register.
Bit 0: One-Second Timer Latched (OSTL). This latched status bit is set to 1 on each 1-second boundary, as
timed by the device. The device chooses an arbitrary 1-second boundary that is timed from either the RCLK signal
or the TICLK signal depending on the setting of the OSTCS bit in MC2. OSTL is cleared when the host processor
writes a 1 to it and is not set again until another 1-second boundary has occurred. When OSTL is set, it can cause
a hardware interrupt to occur if the OSTIE bit in the MSRIE register is set to 1. The interrupt is cleared when this bit
is cleared or the interrupt-enable bit is cleared. This bit can be used to determine when to read the error counters, if
the counters are automatically updated by the 1-second timer.
Bit 1: Counter Overflow Event Latched (COVFL). This latched status bit is set to 1 when the COVF status bit in
the MSR register goes high. COVFL is cleared when the host processor writes a 1 to it and is not set again until
COVF goes high again. When COVFL is set, it can cause a hardware interrupt to occur if the COVFIE bit in the
MSRIE register is set to 1. The interrupt is cleared when this bit is cleared or the interrupt-enable bit is cleared. This
bit can be used to determine when a counter overflow event occurs.
Bit 6: Loss-of-Transmit Clock Latched (LOTCL). This latched status bit is set to 1 when the LOTC status bit in
the MSR register goes high. LOTCL is cleared when the host processor writes a 1 to it and is not set again until
LOTC goes high again. When LOTCL is set, it can cause a hardware interrupt to occur if the LOTCIE bit in the
MSRIE register is set to 1. The interrupt is cleared when this bit is cleared or the interrupt-enable bit is cleared. This
bit can be used to determine when a loss of transmit clock event occurs.
Bit 7: Loss-of-Receive Clock Latched (LORCL). This latched status bit is set to 1 when the LORC status bit in
the MSR register goes high. LORCL is cleared when the host processor writes a 1 to it and is not set again until
LORC goes high again. When LORCL is set, it can cause a hardware interrupt to occur if the LORCIE bit in the
MSRIE register is set to 1. The interrupt is cleared when this bit is cleared or the interrupt-enable bit is cleared. This
bit can be used to determine when a loss of receive clock event occurs.
相關PDF資料
PDF描述
DS31412N IC 12CH DS3/3 FRAMER 349-BGA
DS3150TN IC LIU T3/E3/STS-1 IND 48-TQFP
DS3154N+ IC LIU DS3/E3/STS-1 QD 144CSBGA
DS3164+ IC ATM/PACKET PHY QUAD 400-BGA
DS3170+ IC TXRX DS3/E3 100-CSBGA
相關代理商/技術參數
參數描述
DS3141+ 功能描述:網絡控制器與處理器 IC Single DS3/E3 Framer RoHS:否 制造商:Micrel 產品:Controller Area Network (CAN) 收發器數量: 數據速率: 電源電流(最大值):595 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:PBGA-400 封裝:Tray
DS314-1010NR WAF 制造商:ON Semiconductor 功能描述:
DS31412 功能描述:網絡控制器與處理器 IC 12 Port DS3/E3 Framer RoHS:否 制造商:Micrel 產品:Controller Area Network (CAN) 收發器數量: 數據速率: 電源電流(最大值):595 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:PBGA-400 封裝:Tray
DS31412N 功能描述:網絡控制器與處理器 IC 12 Port DS3/E3 Framer RoHS:否 制造商:Micrel 產品:Controller Area Network (CAN) 收發器數量: 數據速率: 電源電流(最大值):595 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:PBGA-400 封裝:Tray
DS31415 制造商:MAXIM 制造商全稱:Maxim Integrated Products 功能描述:3-Input, 4-Output, Single DPLL Timing IC with Sub-ps Output Jitter and 1588 Clock