![](http://datasheet.mmic.net.cn/Analog-Devices-Inc/ADV7184BSTZ_datasheet_96349/ADV7184BSTZ_5.png)
ADV7184
Rev. A | Page 5 of 112
SPECIFICATIONS
ELECTRICAL CHARACTERISTICS
AVDD = 3.15 V to 3.45 V, DVDD = 1.65 V to 2.0 V, DVDDIO = 3.0 V to 3.6 V, PVDD = 1.71 V to 1.89 V, nominal input range 1.6 V.
Operating temperature range, unless otherwise noted.
Table 1.
Parameter
Symbol
Test Conditions
Min
Typ
Max
Unit
STATIC PERFORMANCE
1,
2,
3Resolution (Each ADC)
N
10
Bits
Integral Nonlinearity
INL
BSL at 54 MHz
0.6/+0.7
±3
LSB
Differential Nonlinearity
DNL
BSL at 54 MHz
0.5/+0.5
0.99/+2.5
LSB
DIGITAL INPUTS
VIH
2
V
VIL
0.8
V
IIN
50
+50
μA
10
+10
μA
CIN
10
pF
DIGITAL OUTPUTS
VOH
ISOURCE = 0.4 mA
2.4
V
VOL
ISINK = 3.2 mA
0.4
V
High Impedance Leakage Current
ILEAK
10
μA
COUT
20
pF
Digital Core Power Supply
DVDD
1.65
1.8
2
V
Digital Input/Output Power Supply
DVDDIO
3.0
3.3
3.6
V
PLL Power Supply
PVDD
1.71
1.8
1.89
V
Analog Power Supply
AVDD
3.15
3.3
3.45
V
Digital Core Supply Current
IDVDD
105
mA
Digital Input/Output Supply Current
IDVDDIO
4
mA
PLL Supply Current
IPVDD
11
mA
Analog Supply Current
IAVDD
99
mA
269
mA
Power-Down Current
IPWRDN
0.65
mA
Power-Up Time
tPWRUP
20
ms
1 All ADC linearity tests performed with the input range at full scale 12.5% and at zero scale + 12.5%.
2 Maximum INL and DNL specifications obtained with the part configured for component video input.
3 Temperature range TMIN to TMAX, 40°C to +85°C. The minimum/maximum specifications are guaranteed over this range.
4 To obtain specified VIH level on Pin 29, Register 0x13 (write only) must be programmed with Value 0x04. If Register 0x13 is programmed with Value 0x00, then VIHon Pin 29 is 1.2 V.
5 To obtain specified VIL level on Pin 29, Register 0x13 (write only) must be programmed with Value 0x04. If Register 0x13 is programmed with Value 0x00, then VILon Pin 29 is 0.4 V.
6 Pins 36 and 79.
7 Excluding all TEST pins (TEST0 to TEST12)
8 VOH and VOL levels obtained using default drive strength value (0xD5) in Register 0xF4.
9 Guaranteed by characterization.
10 Only ADC0 is powered on.
11 All four ADCs powered on.