參數資料
型號: MT90220AL
廠商: Mitel Networks Corporation
英文描述: Octal IMA/UNI PHY Device
中文描述: 八路IMA的/單向物理層設備
文件頁數: 60/116頁
文件大?。?/td> 306K
代理商: MT90220AL
MT90220
52
7.4
RX Registers Description
Tables 41 to 55 describe the
Receive
registers.
Address (Hex):
Direct access
Reset Value (Hex):
100 -107
1 register per link
0C
Bit #
Type
Description
7
R/W
A Value of 0 select to count the number of Stuff cells received by the physical link. A value
of 1 selects to count the total number of cells received by the link.
A value of 1 enables the IMA mode for this link. A value of 0 enables the UNI mode for the
link.
A value of 1 enables the descrambling of the cell for the link
A value of 1 means that the Unassigned cells are discarded upon reception. UNI mode
only.
A value of 1 means that the Idle cells are discarded upon reception. UNI mode only.
A value of 1 enables the discard option of the cells with wrong HEC. A value of 0 will
disables the discard option, all the cells will be written to the receive buffer.
A value of 1signifies that the ATM Forum polynomial value (coset) is not to be added to
the HEC before the verification. A value of 0 means that the HEC as per I.432 only is
calculated and compared (i.e. including the coset).
A value of 1 enables the correction of the cells with a wrong HEC. A value of 0 disable the
correction of the HEC.
6
R/W
5
4
R/W
R/W
3
2
R/W
R/W
1
R/W
0
R/W
Table 41 - RX Link Control Registers
Address (Hex):
Direct access
Reset Value (Hex):
109
1 register for all 8 cell delineation state machines
67
Bit #
Type
Description
7:4
R/W
DELTA parameter value for the Cell Delineation register. The number of consecutive cells
with correct HEC to leave the PRESYNC state to go to the SYNC state. The default value
is 6.
ALPHA parameter value for the Cell Delineation register. The number of consecutive cells
with incorrect HEC to leave the SYNC state to go to the HUNT state. The default value is
7.
3:0
R/W
Table 42 - Cell Delineation Register
Address (Hex):
Direct access
Reset Value (Hex):
108
1 reg. for all 8 cell delineation state machines
0C
Bit #
Type
Description
7:0
R/W
Contains the number of consecutive cell periods that the CD circuit will count before the
incoming ATM cell stream to be considered in LCD state. Each count will be done on a
cell by cell basis. The value of this register is multiplied by 2 before being loaded in the
internal counter. (The internal counter value can be from 0 to 512).
Note that a value of 0 is not allowed as an LCD condition would be generated.
Table 43 - Loss of Delineation Register
相關PDF資料
PDF描述
MT90221 Quad IMA/UNI PHY Device
MT90221AL Quad IMA/UNI PHY Device
MT9041B T1/E1 System Synchronizer
MT9041BP T1/E1 System Synchronizer
MT9041 Multiple Output Trunk PLL
相關代理商/技術參數
參數描述
MT90220ALX01 制造商:Mitel Networks Corporation 功能描述:
MT90221 制造商:MITEL 制造商全稱:Mitel Networks Corporation 功能描述:Quad IMA/UNI PHY Device
MT90221AL 制造商:MITEL 制造商全稱:Mitel Networks Corporation 功能描述:Quad IMA/UNI PHY Device
MT90222 制造商:ZARLINK 制造商全稱:Zarlink Semiconductor Inc 功能描述:4/8/16 Port IMA/TC PHY Device
MT90222AG 制造商:Microsemi Corporation 功能描述:ATM IMA 40MBPS 2.5V 384BGA - Trays