
Mobile Intel
Pentium
III Processor-M Datasheet
10
Datasheet
298340-002
1.
Introduction
Using Intel’s advanced 0.13-micron process technology with copper interconnect, the Mobile Intel
Pentium
III
Processor-M offers high-performance and low-power consumption. The Mobile Intel
Pentium
III
Processor-M (hereafter referred to as “the processor”) is based on the same core as existing
mobile Intel
Pentium
III
processors. Key performance features include Internet Streaming SIMD
instructions, an Advanced Transfer Cache architecture, and a processor system bus speed of 133 MHz.
These features are offered in Micro-FCPGA packages for socketable boards and Micro-FCBGA
packages for surface mount boards.
The Low Voltage Mobile Intel Pentium
III
Processor-M will support both a 133-MHz and 100-MHz
bus speed. The Ultra Low Voltage Mobile Intel Pentium
III
Processor-M supports a 100-MHz bus
speed. The Low Voltage and Ultra Low Voltage Mobile processors will be available only in the Micro-
FCBGA package. All of these technologies make outstanding performance possible for mobile PCs in
a variety of shapes and sizes.
The processor, when used in conjunction with the Intel SpeedStep technology applet version 2.1 or
its equivalent, supports Enhanced Intel SpeedStep technology, which enables real-time dynamic
switching of the voltage and frequency between two performance modes based on CPU demand. This
occurs by switching the bus ratios, core operating voltage, and core processor speeds without resetting
the system. The processor also features a new ultra low power state called Deeper Sleep.
The 512-kB integrated L2 cache based on the Advanced Transfer Cache architecture runs at full speed
and is designed to help improve performance. It complements the system bus by providing critical data
faster and reducing total system power consumption. The processor also features Data Prefetch Logic
that speculatively fetches data to the L2 cache, resulting in improved performance. The Mobile
Pentium III Processor-M’s 64-bit wide Assisted Gunning Transceiver Logic (AGTL) system bus
provides a glue-less, point-to-point interface for a memory controller hub.
This document covers the electrical, mechanical, and thermal specifications for the following:
The Mobile Pentium
III
Processor-M is offered at the following frequencies and voltages
(Maximum Performance mode/Battery Optimized mode): 1200/800 MHz, 1133/733 MHz,
1066/733 MHz, 1000/733 MHz, 933/733 MHz and 866/667 MHz at 1.40V/1.15V.
The Low Voltage Mobile Intel Pentium
III
Processor-M is offered at the following frequencies and
voltages (Maximum Performance mode/Battery Optimized mode): 800/533 MHz, 800A/500
MHz, 750/450 MHz and 733/466 MHz at 1.15V/1.05V.
The Ultra Low Voltage Mobile Pentium
III
Processor-M is offered at the following frequencies
and voltages (Maximum Performance mode/Battery Optimized mode): 700/300 MHz at
1.1V/0.95V.
Unless explicitly stated, all references to the Mobile Pentium
III
Processor-M in this document also
apply to the Low Voltage and Ultra Low Voltage Mobile Pentium
III
Processor-M.