參數資料
型號: R5F562N8ADBG#U0
廠商: Renesas Electronics America
文件頁數: 120/148頁
文件大?。?/td> 0K
描述: MCU 32BIT FLASH 512KROM 176LFBGA
產品培訓模塊: RX Compare Match Timer
RX DMAC
標準包裝: 1
系列: RX600
核心處理器: RX
芯體尺寸: 32-位
速度: 100MHz
連通性: EBI/EMI,I²C,SCI,SPI,USB
外圍設備: DMA,LVD,POR,PWM,WDT
輸入/輸出數: 126
程序存儲器容量: 512KB(512K x 8)
程序存儲器類型: 閃存
RAM 容量: 96K x 8
電壓 - 電源 (Vcc/Vdd): 2.7 V ~ 3.6 V
數據轉換器: A/D 8x10/12b,D/A 2x10b
振蕩器型: 內部
工作溫度: -40°C ~ 85°C
封裝/外殼: 176-LFBGA
包裝: 托盤
2004 Microchip Technology Inc.
DS39609B-page 71
PIC18F6520/8520/6620/8620/6720/8720
6.0
EXTERNAL MEMORY
INTERFACE
The External Memory Interface is a feature of the
PIC18F8X20 devices that allows the controller to
access external memory devices (such as Flash,
EPROM, SRAM, etc.) as program or data memory.
The physical implementation of the interface uses 27
pins. These pins are reserved for external address/data
bus functions; they are multiplexed with I/O port pins on
four ports. Three I/O ports are multiplexed with the
address/data bus, while the fourth port is multiplexed
with the bus control signals. The I/O port functions are
enabled when the EBDIS bit in the MEMCON register
is set (see Register 6-1). A list of the multiplexed pins
and their functions is provided in Table 6-1.
As implemented in the PIC18F8X20 devices, the
interface operates in a similar manner to the external
memory interface introduced on PIC18C601/801
microcontrollers. The most notable difference is that
the interface on PIC18F8X20 devices only operates in
16-bit modes. The 8-bit mode is not supported.
For a more complete discussion of the operating modes
that use the external memory interface, refer to
6.1
Program Memory Modes and the
External Memory Interface
As previously noted, PIC18F8X20 controllers are
capable of operating in any one of four program
memory modes, using combinations of on-chip and
external program memory. The functions of the multi-
plexed port pins depend on the program memory
mode selected, as well as the setting of the EBDIS bit.
In Microprocessor Mode, the external bus is always
active and the port pins have only the external bus
function.
In Microcontroller Mode, the bus is not active and
the pins have their port functions only. Writes to the
MEMCOM register are not permitted.
In Microprocessor with Boot Block or Extended
Microcontroller Mode, the external program memory
bus shares I/O port functions on the pins. When the
device is fetching or doing table read/table write
operations on the external program memory space, the
pins will have the external bus function. If the device is
fetching and accessing internal program memory loca-
tions only, the EBDIS control bit will change the pins
from external memory to I/O port functions. When
EBDIS = 0, the pins function as the external bus.
When EBDIS = 1, the pins function as I/O ports.
REGISTER 6-1:
MEMCON REGISTER
Note:
The External Memory Interface is not
implemented on PIC18F6X20 (64-pin)
devices.
Note:
Maximum FOSC for the PIC18FX520 is
limited to 25 MHz when using the external
memory interface.
R/W-0
U-0
R/W-0
U-0
R/W-0
EBDIS
—WAIT1
WAIT0
—WM1
WM0
bit7
bit0
bit 7
EBDIS: External Bus Disable bit
1
= External system bus disabled, all external bus drivers are mapped as I/O ports
0
= External system bus enabled and I/O ports are disabled
bit 6
Unimplemented: Read as ‘0’
bit 5-4
WAIT<1:0>: Table Reads and Writes Bus Cycle Wait Count bits
11
= Table reads and writes will wait 0 TCY
10
= Table reads and writes will wait 1 TCY
01
= Table reads and writes will wait 2 TCY
00
= Table reads and writes will wait 3 TCY
bit 3-2
Unimplemented: Read as ‘0’
bit 1-0
WM<1:0>: TBLWRT Operation with 16-bit Bus bits
1x
= Word Write mode: TABLAT<0> and TABLAT<1> word output, WRH active when
TABLAT<1> written
01
= Byte Select mode: TABLAT data copied on both MSB and LSB, WRH and (UB or LB)
will activate
00
= Byte Write mode: TABLAT data copied on both MSB and LSB, WRH or WRL will activate
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
- n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
x = Bit is unknown
相關PDF資料
PDF描述
R5F5630ADDFB#V0 MCU RX630 768KB FLASH 144-LQFP
R5F72167GDFA#V0 MCU 1MB FLASH 128K 176-LQFP
R8J73437BGZV SH-MOBILE 3AS
RAPID-NI V2104 MODBUS TCP NET INTERF MOD PARA
RE46C120E16F IC SMOKE DETECTOR ION 16PDIP
相關代理商/技術參數
參數描述
R5F562N8ADFB 制造商:Renesas Electronics Corporation 功能描述:MCU 32BIT RX62N 144QFP 制造商:Renesas Electronics Corporation 功能描述:MCU,RX,32bit,100MHz,512KB Flash,LQFP144 制造商:Renesas Electronics Corporation 功能描述:MCU32Bit 165MIPS ROM512KRAM32K QFP144Pin
R5F562N8ADFB#V0 功能描述:MCU 32BIT FLASH 512KROM 144LQFP RoHS:是 類別:集成電路 (IC) >> 嵌入式 - 微控制器, 系列:RX600 標準包裝:96 系列:PIC® 16F 核心處理器:PIC 芯體尺寸:8-位 速度:20MHz 連通性:I²C,SPI 外圍設備:欠壓檢測/復位,POR,PWM,WDT 輸入/輸出數:11 程序存儲器容量:3.5KB(2K x 14) 程序存儲器類型:閃存 EEPROM 大小:- RAM 容量:128 x 8 電壓 - 電源 (Vcc/Vdd):2.3 V ~ 5.5 V 數據轉換器:A/D 8x10b 振蕩器型:內部 工作溫度:-40°C ~ 125°C 封裝/外殼:14-TSSOP(0.173",4.40mm 寬) 包裝:管件
R5F562N8ADFP 制造商:Renesas Electronics Corporation 功能描述:MCU 32BIT RX62N 100QFP 制造商:Renesas Electronics Corporation 功能描述:MCU, 32BIT, RX62N, 100QFP 制造商:Renesas Electronics Corporation 功能描述:MCU, 32BIT, RX62N, 100QFP; Controller Family/Series:RX600; Core Size:32bit; No. of I/O's:72; Supply Voltage Min:2.7V; Supply Voltage Max:3.6V; Digital IC Case Style:LQFP; No. of Pins:100; Program Memory Size:512KB; RAM Memory ;RoHS Compliant: Yes 制造商:Renesas Electronics Corporation 功能描述:MCU32Bit 165MIPS ROM512KRAM32K QFP100Pin
R5F562N8ADFP#V0 功能描述:MCU 32BIT FLASH 512KROM 100LQFP RoHS:是 類別:集成電路 (IC) >> 嵌入式 - 微控制器, 系列:RX600 標準包裝:96 系列:PIC® 16F 核心處理器:PIC 芯體尺寸:8-位 速度:20MHz 連通性:I²C,SPI 外圍設備:欠壓檢測/復位,POR,PWM,WDT 輸入/輸出數:11 程序存儲器容量:3.5KB(2K x 14) 程序存儲器類型:閃存 EEPROM 大小:- RAM 容量:128 x 8 電壓 - 電源 (Vcc/Vdd):2.3 V ~ 5.5 V 數據轉換器:A/D 8x10b 振蕩器型:內部 工作溫度:-40°C ~ 125°C 封裝/外殼:14-TSSOP(0.173",4.40mm 寬) 包裝:管件
R5F562N8ADLE 制造商:Renesas Electronics Corporation 功能描述:MCU 32BIT RX62N 145LGA 制造商:Renesas Electronics Corporation 功能描述:MCU, 32BIT, RX62N, 145LGA 制造商:Renesas Electronics Corporation 功能描述:MCU, 32BIT, RX62N, 145LGA, Controller Family/Series:RX600, Core Size:32bit, No. of I/O's:103, Supply Voltage Min:2.7V, Supply Voltage Max:3.6V, Digital IC Case Style:LGA, No. of Pins:145, Program Memory Size:512KB, RAM Memory , RoHS Compliant: Yes