參數資料
型號: S29GL128M90FAIR20
廠商: SPANSION LLC
元件分類: DRAM
英文描述: MOSFET, Switching; VDSS (V): -30; ID (A): -14; Pch : 2.5; RDS (ON) typ. (ohm) @10V: 0.009; RDS (ON) typ. (ohm) @4V[4.5V]: [0.015]; RDS (ON) typ. (ohm) @2.5V: -; Ciss (pF) typ: 3500; toff (µs) typ: 0.31; Package: SOP-8
中文描述: 8M X 16 FLASH 3V PROM, 90 ns, PBGA64
封裝: 13 X 11 MM, FORTIFIED, BGA-64
文件頁數: 107/160頁
文件大小: 2142K
代理商: S29GL128M90FAIR20
April 30, 2004 S29GLxxxM_00A5
S29GLxxxM MirrorBit
TM
Flash Family
107
P r e l i m i n a r y
Figure 3. Write Buffer Programming Operation
Write “Write to Buffer”
command and
Sector Address
Write number of addresses
to program minus 1(WC)
and Sector Address
Write program buffer to
flash sector address
Write first address/data
Write to a different
sector address
FAIL or ABORT
PASS
Read DQ7 - DQ0 at
Last Loaded Address
Read DQ7 - DQ0 with
address = Last Loaded
Address
Write next address/data pair
WC = WC - 1
WC = 0
Part of “Write to Buffer”
Command Sequence
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
No
Abort Write to
Buffer Operation
DQ7 = Data
DQ7 = Data
DQ5 = 1
DQ1 = 1
Write to buffer ABORTED.
Must write “Write-to-buffer
Abort Reset” command
sequence to return
to read mode.
(Note 2)
(Note 3)
(Note 1)
Notes:
1.
When Sector Address is specified, any address in
the selected sector is acceptable. However, when
loading Write-Buffer address locations with data, all
addresses must fall within the selected Write-Buffer
Page.
DQ7 may change simultaneously with DQ5.
Therefore, DQ7 should be verified.
If this flowchart location was reached because
DQ5= “1”, then the device FAILED. If this flowchart
location was reached because DQ1= “1”, then the
Write to Buffer operation was ABORTED. In either
case, the proper reset command must be written
before the device can begin another operation. If
DQ1=1, write the Write-Buffer-Programming-
Abort-Reset command. if DQ5=1, write the Reset
command.
See
Table
31
and Table
32
for command
sequences required for write buffer programming.
2.
3.
4.
相關PDF資料
PDF描述
S29GL128M90FAIR22 3.0 Volt-only Page Mode Flash Memory featuring 0.23 um MirrorBit process technology
S29GL128M90FAIR23 MOSFET, Switching; VDSS (V): -60; ID (A): -5; Pch : 2.0/3.0; RDS (ON) typ. (ohm) @10V: 0.06; RDS (ON) typ. (ohm) @4V[4.5V]: [0.09]; RDS (ON) typ. (ohm) @2.5V: -; Ciss (pF) typ: 1350; toff (µs) typ: 0.055; Package: SOP-8
S29GL128M90FAIR80 MOSFET, Switching; VDSS (V): -60; ID (A): -5; Pch : 2.0/3.0; RDS (ON) typ. (ohm) @10V: 0.06; RDS (ON) typ. (ohm) @4V[4.5V]: [0.09]; RDS (ON) typ. (ohm) @2.5V: -; Ciss (pF) typ: 1350; toff (µs) typ: 0.055; Package: SOP-8
S29GL128M90FAIR82 3.0 Volt-only Page Mode Flash Memory featuring 0.23 um MirrorBit process technology
S29GL128M90FAIR83 3.0 Volt-only Page Mode Flash Memory featuring 0.23 um MirrorBit process technology
相關代理商/技術參數
參數描述
S29GL128M90TAIR10 制造商:Spansion 功能描述:Flash Mem Parallel 3V/3.3V 128M-Bit 16M x 8/8M x 16 90ns 56-Pin TSOP Tray
S29GL128M90TAIR13 制造商:Spansion 功能描述:FLASH PARALLEL 3V/3.3V 128MBIT 16MX8/8MX16 90NS 56TSOP - Tape and Reel
S29GL128M90TFIR10 制造商:Spansion 功能描述:Flash Mem Parallel 3V/3.3V 128M-Bit 16M x 8/8M x 16 90ns 56-Pin TSOP Tray
S29GL128N10FFI010 制造商:Spansion 功能描述:NOR Flash Parallel 3V/3.3V 128Mbit 16M/8M x 8bit/16bit 100ns 64-Pin Fortified BGA Tray 制造商:Spansion 功能描述:MIRRORBIT FLASH 128MB SMD 29LV128
S29GL128N10FFI020 制造商:Spansion 功能描述:Flash - NOR IC