參數資料
型號: M34551E8-XXXFP
元件分類: 微控制器/微處理器
英文描述: 4-BIT, OTPROM, MICROCONTROLLER, PQFP48
封裝: 7 X 10 MM, 0.65 MM PITCH, PLASTIC, QFP-48
文件頁數: 88/154頁
文件大?。?/td> 1778K
代理商: M34551E8-XXXFP
FUNCTIONAL BLOCK OPERATIONS
HARDWARE
1-28
4551 Group User’s Manual
LCD FUNCTION
The 4551 Group has an LCD (Liquid Crystal Display) controller/
driver. When data are set in timer control registers (W2, W3),
timer LC, LCD control registers (L1, L2), and LCD RAM, the LCD
controller/driver automatically reads the display data and controls
the LCD display by setting duty and bias.
4 common signal output pins and 20 segment signal output pins
can be used to drive the LCD. By using these pins, up to 80
segments (when 1/4 duty and 1/3 bias are selected) can be
controlled to display. When the required number of segment pins
is 19 or less, pins SEG16–SEG19 (4) can be used as input ports
P20–P23.
(1) Duty and bias
There are 3 combinations of duty and bias for displaying data
on the LCD. Use bits 0 and 1 of LCD control register (L1) to
select the proper display method for the LCD panel being
used.
q 1/2 duty, 1/2 bias
q 1/3 duty, 1/3 bias
q 1/4 duty, 1/3 bias
Table 12 Duty and maximum number of displayed pixels
(2) LCD clock control
The LCD clock is determined by the timer 2 count source
selection bit (W23), timer LC control bit (W30), and timer LC.
Accordingly, the frequency (F) of the LCD clock is obtained
by the following formula. Numbers ( to ) shown below the
formula correspond to numbers in Figure 24, respectively.
q When using the prescaler output (ORCLK) as timer 2 count
source (W23=“1”)
F = ORCLK !!
!
q When using the f(XCIN) as timer 2 count source (W23=“0”)
F = f(XCIN) !!
!
[LC: 0 to 15]
The frame frequency and frame period for each display
method can be obtained by the following formula:
Frame frequency =
(Hz)
Frame period =
(s)
F: LCD clock frequency
1/n: Duty
Fig. 24 LCD clock control circuit structure
Duty
1/2
1/3
1/4
Used COM pins
COM0, COM1 (Note)
COM0–COM2 (Note)
COM0–COM3
Maximum number of displayed pixels
40 segments
60 segments
80 segments
Note: Leave unused COM pins open.
1
16
1
LC + 1
1
2
1
16
1
LC + 1
1
2
F
n
F
Note: Count source is stopped by clearing to “0.”
Timer LC
1/2
1/16
W30
0
1
(Note)
XCIN
W23
0
1
ORCLK
STCK
W31
1
0
LCD clock
相關PDF資料
PDF描述
M34554M8-XXXFP 4-BIT, MROM, 6 MHz, MICROCONTROLLER, PQFP64
M34554MC-XXXFP 4-BIT, MROM, 6 MHz, MICROCONTROLLER, PQFP64
M34571G6FP 4-BIT, MROM, 6 MHz, MICROCONTROLLER, PDSO24
M34584EDFP 4-BIT, OTPROM, 6 MHz, MICROCONTROLLER, PDSO42
M35047-XXXSP 24 X 12 CHARACTERS CRT CHAR DSPL CTLR, PDIP20
相關代理商/技術參數
參數描述
M34551M4 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:4-BIT SINGLE-CHIP MICROCOMPUTER
M34551M4-XXXFP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER for INFRARED REMOTE CONTROL TRANSMITTER
M34551M8 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:4-BIT SINGLE-CHIP MICROCOMPUTER
M34552G8FP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER
M34552G8HFP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER