參數資料
型號： M34551E8-XXXFP
元件分類： 微控制器/微處理器
英文描述： 4-BIT, OTPROM, MICROCONTROLLER, PQFP48
封裝： 7 X 10 MM, 0.65 MM PITCH, PLASTIC, QFP-48
文件頁數： 70/154頁
文件大小： 1778K
代理商： M34551E8-XXXFP
FUNCTIONAL BLOCK OPERATIONS
4551 Group User’s Manual
HARDWARE
1-11
Fig. 5 Stack registers (SKs) structure
Fig. 6 Example of operation at subroutine call
(5) Stack registers (SKS) and stack pointer (SP)
Stack registers (SKs) are used to temporarily store the
contents of program counter (PC) just before branching until
returning to the original routine when;
branching to an interrupt service routine (referred to as
an interrupt service routine),
performing a subroutine call, or
executing the table reference instruction (TABP p).
Stack registers (SKs) are eight identical registers, so that
subroutines can be nested up to 8 levels. However, one of
stack registers is used when using an interrupt service routine
or when executing a table reference instruction. Accordingly,
be careful not to stack over when performing these operations
together. The contents of registers SKs are destroyed when
8 levels are exceeded.
The register SK nesting level is pointed automatically by 3-
bit stack pointer (SP). The contents of the stack pointer (SP)
can be transferred to register A with the TASP instruction.
Figure 5 shows the stack registers (SKs) structure.
Figure 6 shows the example of operation at subroutine call.
(6) Interrupt stack register (SDP)
Interrupt stack register (SDP) is a 1-stage register. When an
interrupt occurs, this register (SDP) is used to temporarily
store the contents of data pointer, carry flag, skip flag, register
A, and register B just before an interrupt until returning to the
original routine. Multiple interrupts cannot be used.
Unlike the stack registers (SKs), this register (SDP) is not
used when executing the subroutine call instruction and the
table reference instruction.
(7) Skip flag
Skip flag controls skip decision for the conditional skip
instructions and continuous described skip instructions. When
an interrupt occurs, the contents of skip flag is stored
automatically in the interrupt stack register (SDP) and the
skip condition is retained.
Returning to the BM instruction execution
address with the RT instruction, and the BM
instruction is equivalent to the NOP instruction.
(SP)
0
(SK0)
000116
(PC)
SUB1
Main program
000216 NOP
Address
000016 NOP
000116 BM SUB1
Subroutine
SUB1 :
NOP
RT
(PC)
(SK0)
(SP)
7
Note:
SK0
SK1
SK2
SK3
SK4
SK5
SK6
SK7
(SP) = 0
(SP) = 1
(SP) = 2
(SP) = 3
(SP) = 4
(SP) = 5
(SP) = 6
(SP) = 7
Program counter (PC)
Executing the return or
table reference instruction
Executing the subroutine
call or table reference
instruction
Stack pointer (SP) points “7” at reset or
returning from RAM back-up mode. It points “0”
by executing the first BM instruction, and the
contents of program counter is stored in SK0.
When the BM instruction is executed after eight
stack registers are used ((SP) = 7), (SP) = 0
and the contents of SK0 is destroyed.
相關PDF資料
PDF描述
M34554M8-XXXFP 4-BIT, MROM, 6 MHz, MICROCONTROLLER, PQFP64
M34554MC-XXXFP 4-BIT, MROM, 6 MHz, MICROCONTROLLER, PQFP64
M34571G6FP 4-BIT, MROM, 6 MHz, MICROCONTROLLER, PDSO24
M34584EDFP 4-BIT, OTPROM, 6 MHz, MICROCONTROLLER, PDSO42
M35047-XXXSP 24 X 12 CHARACTERS CRT CHAR DSPL CTLR, PDIP20
相關代理商/技術參數
參數描述
M34551M4 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:4-BIT SINGLE-CHIP MICROCOMPUTER
M34551M4-XXXFP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER for INFRARED REMOTE CONTROL TRANSMITTER
M34551M8 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:4-BIT SINGLE-CHIP MICROCOMPUTER
M34552G8FP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER
M34552G8HFP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*