參數資料
型號： RTL8305SB
英文描述： RTL8305SB
中文描述： RTL8305SB
文件頁數： 17/66頁
文件大?。?/td> 963K
代理商： RTL8305SB
RTL8305SB
2002/04/09
17
Rev.1.0
5.9 Strapping Pins
Those pins which are dual function pins are output for LED or input for strapping. Below are strapping descriptions only.
Pin Name
Pin No. Type
Description
EN_AUTOXOVER
69
I
Enable Auto crossover function.
1: Enable auto crossover detection.
0: Disable auto crossover detection. MDI only.
QWeight[1]
QWeight[0]
81
The frame service rate of High-pri queue: Low-pri queue
11: 16:1
10: always high priority queue first
01: 8:1
00: 4:1
8305SB = QWeight[1:0], 8305S = NC.
DisPortPri[4]
DisPortPri[3]
DisPortPri[2]
DisPortPri[1]
DisPortPri[0]
83
DisPortPri[1]: 1=Disable port 1 priority. 0=Enable port 1 priority.
DisPortPri[0]: 1=Disable port 0 priority. 0=Enable port 0 priority.
8305SB = DisPortPri[4:0], 8305S = NC.
LoopLED#
/DisTagPri
function is enabled, this pin indicates whether Network loop is detected
or not. Otherwise, this pin is of no use.
The LED statuses are represented as active-low or high depending on
input strapping.
=> If Input=1: Ouput 0= Network loop is detected. 1=No loop.
=> If Input=0: Ouput 1= Network loop is detected. 0= No loop.
Input upon reset = Disable 802.1p VLAN Tag priority based QoS
function.
1: Disable
0: Enable
8305SB = LoopLED#/DisTagPri, 8305S = EnP4LED. 8305SB moves
the EnP4LED option into EEPROM.
LED_ADD[0]/
DisFCAutoOff
Input upon reset = Disable Auto Turn Off function of Flow Control
Ability.
1: Disable
0: Enable. Enable Auto turn off low priority queue's flow control ability
1~2 sec whenever the port received a VLAN-tag or TOS/DS high
priority frame. The flow control ability will re-enabled when there is not
received and high priority frame during 1~2 sec.
LED_ADD[1]/
DISVLAN
1: Disable VLAN
0: Enable VLAN According to the internal registers
Cont…
Default
1
82
I
Weighted round robin ration of priority queue.
11
88
86
85
84
I
Enable Port based priority QoS function.
DisPortPri[4]: 1=Disable port 4 priority. 0=Enable port 4 priority.
DisPortPri[3]: 1=Disable port 3 priority. 0=Enable port 3 priority.
DisPortPri[2]: 1=Disable port 2 priority. 0=Enable port 2 priority.
11111
91
I/O
Output after reset = LoopLED# used for LED:
If the Loop detection
1
92
I/O
Output after reset = used for LED:
1
93
I/O
Output after reset = used for LED:
Input upon reset = Disable VLAN function.
1
相關PDF資料
PDF描述
RTL8316 Specifications
RTL8801 Specifications
RTM5070 IR LEUCHTELEMENT ZUR FRONTPLATTENMONTAGE
RTP-PT100 MESSFUEHLER PT100 EXTERN
RTR25 ＂CLOCK 8＂＂RIGHTIME - RADIO CONTROL＂
相關代理商/技術參數
參數描述
RTL8305SC 制造商:未知廠家 制造商全稱:未知廠家 功能描述:用于100M網絡交換
RTL8305SC-LF 制造商:Realtek Semiconductor 功能描述:
RTL8308B 制造商:Realtek Semiconductor 功能描述:8-PORT 10/100 ETHERNET SWITCH CONTROLLER WITH EMBEDDED MEMORY, PQFP128
RTL8309SB 制造商:未知廠家 制造商全稱:未知廠家 功能描述:SINGLE-CHIP 9-PORT 10/100MBPS SWITCH CONTROLLER
RTL8309SB-LF 制造商:Realtek Semiconductor 功能描述:RTL8309 Series 9 Port 10/100 Mbps Ethernet Switch Controller - PQFP-128 制造商:Realtek 功能描述:RTL8309 Series 9 Port 10/100 Mbps Ethernet Switch Controller - PQFP-128
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*