參數資料
型號： MPC7410VS500LE
廠商： Freescale Semiconductor
文件頁數： 4/56頁
文件大小： 0K
描述： IC MPU PPC 500MHZ 360-FCCLGA
標準包裝： 44
系列： MPC74xx
處理器類型： 32-位 MPC74xx PowerPC
速度： 500MHz
電壓： 1.8V
安裝類型： 表面貼裝
封裝/外殼： 360-CLGA，F(xiàn)CCLGA
供應商設備封裝： 360-FCCLGA（25x25）
包裝： 托盤
MPC7410 RISC Microprocessor Hardware Specifications, Rev. 6.1
12
Freescale Semiconductor
Electrical and Thermal Characteristics
High-Z (off-state) leakage current,
Vin = L2OVDD/OVDD
1.8
ITSI
—20
A
2, 3,
5, 7
2.5
ITSI
—35
3.3
ITSI
—70
Output high voltage, IOH = –5 mA
1.8
VOH
(L2)OVDD – 0.45
—
V
8
2.5
VOH
1.7
—
3.3
VOH
2.4
—
Output low voltage, IOL = 5 mA
1.8
VOL
—0.45
V
8
2.5
VOL
—0.4
3.3
VOL
—0.4
Capacitance, Vin = 0 V, f = 1 MHz
Cin
—
6.0
pF
3, 4, 7
Notes:
1. Nominal voltages; see Table 3 for recommended operating conditions.
2. For processor bus signals, the reference is OVDD while L2OVDD is the reference for the L2 bus signals.
3. Excludes factory test signals.
4. Capacitance is periodically sampled rather than 100% tested.
5. The leakage is measured for nominal OVDD and L2OVDD, or both OVDD and L2OVDD must vary in the same
direction (for example, both OVDD and L2OVDD vary by either +5% or –5%).
6. Measured at max OVDD/L2OVDD.
7. Excludes IEEE 1149.1 boundary scan (JTAG) signals.
8. For JTAG support: all signals controlled by BVSEL and L2VSEL will see VIL/VIH/VOL/VOH/CVIH/CVIL DC limits of
1.8 V mode while either the EXTEST or CLAMP instruction is loaded into the IEEE 1149.1 instruction register by
the UpdateIR TAP state until a different instruction is loaded into the instruction register by either another UpdateIR
or a Test-Logic-Reset TAP state. If only TSRT is asserted to the part, and then a SAMPLE instruction is executed,
there is no way to control or predict what the DC voltage limits are. If HRESET is asserted before executing a
SAMPLE instruction, the DC voltage limits will be controlled by the BVSEL/L2VSEL settings during HRESET.
Anytime HRESET is not asserted (that is, just asserting TRST), the voltage mode is not known until either EXTEST
or CLAMP is executed, at which time the voltage level will be at the DC limits of 1.8 V.
Table 5. DC Electrical Specifications (continued)
At recommended operating conditions (see Table 3)
Characteristic
Nominal
Bus
Voltage1
Symbol
Min
Max
Unit
Notes
相關PDF資料
PDF描述
MPC8567VTAUJJ MPU POWERQUICC III 1023-PBGA
IDT70V9179L9PF8 IC SRAM 288KBIT 9NS 100TQFP
MPC8543ECPXAQGB MPU POWERQUICC III 783-PBGA
MPC8266AZUPJDC IC MPU POWERQUICC II 480-TBGA
ACB108DHAD CONN EDGECARD 216PS R/A .050 DIP
相關代理商/技術參數
參數描述
MPC7441 制造商:FREESCALE 制造商全稱:Freescale Semiconductor, Inc 功能描述:RISC Microprocessor Hardware Specifications
MPC7445 制造商:FREESCALE 制造商全稱:Freescale Semiconductor, Inc 功能描述:RISC Microprocessor Hardware Specifications
MPC7447 制造商:FREESCALE 制造商全稱:Freescale Semiconductor, Inc 功能描述:RISC Microprocessor Hardware Specifications
MPC7447A 制造商:FREESCALE 制造商全稱:Freescale Semiconductor, Inc 功能描述:RISC Microprocessor Hardware Specifications
MPC7447A_06 制造商:FREESCALE 制造商全稱:Freescale Semiconductor, Inc 功能描述:RISC Microprocessor Hardware Specifications
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*