![](http://datasheet.mmic.net.cn/Maxim-Integrated-Products/DS34T102GN-_datasheet_97090/DS34T102GN-_171.png)
____________________________________________________ DS34T101, DS34T102, DS34T104, DS34T108
171 of 366
Packet_classifier_cfg_reg13 0x6C
Bits
Data Element Name
R/W
Reset
Value
Description
[31:0]
Ipv6_add1[31:0]
R/W
0x0
This field holds bits 31:0 of the first of two IPv6 addresses
for the device. The other address is held in registers
for packets received from the Ethernet port.
Packet_classifier_cfg_reg14 0x70
Bits
Data Element Name
R/W
Reset
Value
Description
[31:0]
Ipv6_add2[127:96]
R/W
0x0
This field holds bits 127:96 of the second of two IPv6
addresses for the device. The other address is held in
registers starting with
Relevant only for packets received from the Ethernet port.
If a second IPv6 address is not needed, this field must be
configured to the same value as Ipv6_add1.
Packet_classifier_cfg_reg15 0x74
Bits
Data Element Name
R/W
Reset
Value
Description
[31:0]
Ipv6_add2[95:64]
R/W
0x0
This field holds bits 95:64 of the second of two IPv6
addresses for the device. The other address is held in
registers starting with
Packet_classifier_cfg_reg10. Relevant only for packets received from the Ethernet port.
If a second IPv6 address is not needed, this field must be
configured to the same value as Ipv6_add1.
Packet_classifier_cfg_reg16 0x78
Bits
Data Element Name
R/W
Reset
Value
Description
[31:0]
Ipv6_add2[63:32]
R/W
0x0
This field holds bits 63:32 of the second of two IPv6
addresses for the device. The other address is held in
registers starting with
Packet_classifier_cfg_reg10. Relevant only for packets received from the Ethernet port.
If a second IPv6 address is not needed, this field must be
configured to the same value as Ipv6_add1.
Packet_classifier_cfg_reg17 0x7C
Bits
Data Element Name
R/W
Reset
Value
Description
[31:0]
Ipv6_add2[31:0]
R/W
0x0
This field holds bits 31:0 of the second of two IPv6
addresses for the device. The other address is held in
registers starting with
Relevant only for packets received from the Ethernet port.
If a second IPv6 address is not needed, this field must be
configured to the same value as Ipv6_add1.
Packet_classifier_cfg_reg18 0x80
Bits
Data Element Name
R/W
Reset
Value
Description
[31:16]
VCCV_oam_mask_n
R/W
0x0000
Indicates which of the 16 most significant bits of the
control word should be compared to identify VCCV OAM
packets. The values of the bits to be compared are stored