參數資料
型號: ADE7758ARWZRL
廠商: ANALOG DEVICES INC
元件分類: 模擬信號調理
英文描述: Poly Phase Multifunction Energy Metering IC with Per Phase Information
中文描述: SPECIALTY ANALOG CIRCUIT, PDSO24
封裝: LEAD FREE, MS-013-AD, SOIC-24
文件頁數: 12/68頁
文件大小: 1584K
代理商: ADE7758ARWZRL
ADE7758
TERMINOLOGY
Measurement Error
The error associated with the energy measurement made by the
ADE7758 is defined by the following formula
Rev. A | Page 12 of 68
%
100
×
=
Energy
True
Energy
True
ADE7758
by
Registered
Energy
Error
t
Measuremen
Phase Error between Channels
The high-pass filter and digital integrator introduce a slight
phase mismatch between the current and the voltage channel.
The all-digital design ensures that the phase matching between
the current channels and voltage channels in all three phases is
within ±0.1° over a range of 45 Hz to 65 Hz and ±0.2° over a
range of 40 Hz to 1 kHz. This internal phase mismatch can be
combined with the external phase error (from current sensor or
component tolerance) and calibrated with the phase calibration
registers.
Power Supply Rejection
This quantifies the ADE7758 measurement error as a
percentage of reading when the power supplies are varied. For
the ac PSR measurement, a reading at nominal supplies (5 V) is
taken. A second reading is obtained with the same input signal
levels when an ac signal (175 mV rms/100 Hz) is introduced
onto the supplies. Any error introduced by this ac signal is
expressed as a percentage of reading—see the Measurement
Error definition.
For the dc PSR measurement, a reading at nominal supplies
(5 V) is taken. A second reading is obtained with the same input
signal levels when the power supplies are varied ±5%. Any error
introduced is again expressed as a percentage of the reading.
ADC Offset Error
This refers to the dc offset associated with the analog inputs to
the ADCs. It means that with the analog inputs connected to
AGND the ADCs still see a dc analog input signal. The
magnitude of the offset depends on the gain and input range
selection (see the Typical Performance Characteristics section).
However, when HPFs are switched on, the offset is removed
from the current channels and the power calculation is not
affected by this offset.
Gain Error
The gain error in the ADCs of the ADE7758 is defined as the
difference between the measured ADC output code (minus the
offset) and the ideal output code (see the Current Channel ADC
and Voltage Channel ADC sections). The difference is
expressed as a percentage of the ideal code.
Gain Error Match
The gain error match is defined as the gain error (minus the
offset) obtained when switching between a gain of 1, 2, or 4. It is
expressed as a percentage of the output ADC code obtained
under a gain of 1.
相關PDF資料
PDF描述
ADE7759ARSRL Active Energy Metering IC with di/dt Sensor Interface
ADE7759ARS 8-Channel 14-Bit Single-Supply Voltage-Output DAC; Package: LQFP (10x10mm); No of Pins: 52; Temperature Range: Industrial
ADE7759 Active Energy Metering IC with di/dt Sensor Interface
ADE7760ARSRL Energy Metering IC with On-Chip Fault Detection
ADE7760 8-Channel 14-Bit Single-Supply Voltage-Output DAC; Package: LQFP (10x10mm); No of Pins: 52; Temperature Range: Industrial
相關代理商/技術參數
參數描述
ADE7759 制造商:AD 制造商全稱:Analog Devices 功能描述:Active Energy Metering IC with di/dt Sensor Interface
ADE7759ARS 功能描述:IC ENERGY METERING 1PHASE 20SSOP RoHS:否 類別:集成電路 (IC) >> PMIC - 能量測量 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:2,500 系列:*
ADE7759ARSRL 功能描述:IC ENERGY METERING 1PHASE 20SSOP RoHS:否 類別:集成電路 (IC) >> PMIC - 能量測量 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:2,500 系列:*
ADE7759ARSZ 功能描述:IC ENERGY METERING 1PHASE 20SSOP RoHS:是 類別:集成電路 (IC) >> PMIC - 能量測量 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:2,500 系列:*
ADE7759ARSZRL 功能描述:IC ENERGY METERING 1PHASE 20SSOP RoHS:是 類別:集成電路 (IC) >> PMIC - 能量測量 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:2,500 系列:*