參數資料
型號: 935230900112
廠商: NXP SEMICONDUCTORS
元件分類: 微控制器/微處理器
英文描述: 2 CHANNEL(S), 1M bps, LOCAL AREA NETWORK CONTROLLER, PDIP28
封裝: 0.600 INCH, PLASTIC, DIP-28
文件頁數: 44/68頁
文件大?。?/td> 234K
代理商: 935230900112
2000 Jan 04
49
Philips Semiconductors
Product specication
Stand-alone CAN controller
SJA1000
6.4.16
RX MESSAGE COUNTER (RMC)
The RMC register (CAN address 29) reflects the number of messages available within the RXFIFO. The value is
incremented with each receive event and decremented by the release receive buffer command. After any reset event,
this register is cleared.
Table 42 Bit interpretation of the RX message counter (RMC); CAN address 29
Note
1. This bit cannot be written. During read-out of this register always a zero is given.
BIT 7
BIT 6
BIT 5
BIT 4
BIT 3
BIT 2
BIT 1
BIT 0
(0)(1)
RMC.4
RMC.3
RMC.2
RMC.1
RMC.0
6.4.17
RX BUFFER START ADDRESS REGISTER (RBSA)
The RBSA register (CAN address 30) reflects the currently
valid internal RAM address, where the first byte of the
received message, which is mapped to the receive buffer
window, is stored. With the help of this information it is
possible to interpret the internal RAM contents.
The internal RAM address area begins at CAN address 32
and may be accessed by the CPU for reading and writing
(writing in reset mode only).
Example: if RBSA is set to 24 (decimal), the current
message visible in the receive buffer window
(CAN address 16 to 28) is stored within the internal RAM
beginning at RAM address 24. Because the RAM is also
mapped directly to the CAN address space beginning at
CAN address 32 (equal to RAM address 0) this message
may also be accessed using CAN address 56 and the
following bytes
(CAN address = RBSA + 32 > 24 + 32 = 56).
If a message exceeds RAM address 63, it continues at
RAM address 0.
The release receive buffer command is always given while
there is at least one more message available within the
FIFO. RBSA is updated to the beginning of the next
message.
On hardware reset, this pointer is initialized to ‘00H’. Upon
a software reset (setting of reset mode) this pointer keeps
its old value, but the FIFO is cleared; this means that the
RAM contents are not changed, but the next received (or
transmitted) message will override the currently visible
message within the receive buffer window.
The RX buffer start address register appears to the CPU
as a read only memory in operating mode and as
read/write memory in reset mode. It should be noted that a
write access to RBSA takes effect first after the next
positive edge of the internal clock frequency, which is half
of the external oscillator frequency.
Table 43 Bit interpretation of the RX buffer start address register (RBSA); CAN address 30
Note
1. This bit cannot be written. During read-out of this register always a zero is given.
BIT 7
BIT 6
BIT 5
BIT 4
BIT 3
BIT 2
BIT 1
BIT 0
(0)(1)
RBSA.5
RBSA.4
RBSA.3
RBSA.2
RBSA.1
RBSA.0
相關PDF資料
PDF描述
06NU06NU INNENGEWINDE BSP DREHB G 0.38
08NU06NU INNENGEWINDE BSP DREHB G G 0.38X0.5ZOLL
08NU08NU INNENGEWINDE BSP DREHB G 0.5
08NU10NU INNENGEWINDE BSP DREHB G 0.5X0.63ZOLL
08NU12NU INNENGEWINDE BSP DREHB G0.5X0.75ZOLL
相關代理商/技術參數
參數描述
9352370001 功能描述:HEAT SHRINK SLEEVE RoHS:是 類別:線纜,導線 - 管理 >> 標簽,標記 系列:HT-SCE 標準包裝:250 系列:CM-SCE 標簽類型:標準 標簽尺寸:2.00" x 0.25"(50.8mm x 6.4mm) 顏色:白 材質:聚烯烴 適用于相關產品:點陣打印機 包裝:* 工作溫度:-55°C ~ 135°C 其它名稱:A105291CM-SCE-TP-1/4-4H-9
935241-0001 制造商: 功能描述: 制造商:DIGITRAN 功能描述: 制造商:undefined 功能描述:
935241-1 制造商:DIGITRAN 功能描述: 制造商:DTRAN 功能描述:
935245650125 制造商:NXP Semiconductors 功能描述:Inverter 1-Element CMOS 5-Pin TSSOP T/R
935248-90 制造商:JANCO 功能描述:935248-90