參數資料
型號： S1C6P466D0A0A00
元件分類： 微控制器/微處理器
英文描述： MICROCONTROLLER, UUC140
封裝： DIE-140
文件頁數： 80/174頁
文件大小： 1582K
代理商： S1C6P466D0A0A00
160
EPSON
S1C6P466 TECHNICAL MANUAL
APPENDIX B S5U1C63000P MANUAL (PERIPHERAL CIRCUIT BOARD FOR S1C63404/454/455/458/466/P466)
B.3 Usage Precautions
To ensure correct use of this board (S5U1C63000P), please observe the following precautions.
B.3.1 Operational precautions
(1) Before inserting or removing cables, turn off power to all pieces of connected equipment.
(2) Do not turn on power or load mask option data if all of the input ports (K00–K03) are held low. Doing
so may activate the multiple key entry reset function.
(3) Before debugging, always be sure to load mask option data.
B.3.2 Differences with the actual IC
(1) Differences in I/O
<Interface power supply>
This board and target system interface voltage is set to +3.3 V. To obtain the same interface voltage as
in the actual IC, attach a level shifter circuit, etc. on the target system side to accommodate the
required interface voltage.
<Each output port’s drive capability>
The drive capability of each output port on this board is higher than that of the actual IC. When
designing application system and software, refer to the technical manual for the S1C63404/454/455/
458/466/P466 to confirm each output port’s drive capability.
<Each port’s protective diode>
All I/O ports incorporate a protective diode for VDD and VSS, and the interface signals between this
board and the target system are set to +3.3 V. Therefore, this board and the target system cannot be
interfaced with voltages exceeding VDD by setting the output ports for open-drain mode.
<Pull-up resistance value>
The pull-up resistance values on this board are set to 220 k
which differ from those for the actual IC.
For the resistance values on the actual IC, refer to the technical manual for the S1C63404/454/455/
458/466/P466.
Note that when using pull-up resistors to pull the input pins high, the input pins may require a
certain period to reach a valid high level. Exercise caution if a key matrix circuit is configured using a
combination of output and input ports, since rise delay times on these input ports differ from those of
the actual IC.
(2) Differences in current consumption
The amount of current consumed by this board differs significantly from that of the actual IC. Inspect-
ing the LEDs on this board may help you keep track of approximate current consumption. The
following factors/components greatly affect device current consumption:
<Those which can be verified by LEDs and monitor pins>
a) Run and Halt execution ratio (verified by LEDs and monitor pins on the ICE)
b) CPU operating voltage select circuit (VDC)
c) OSC3 oscillation on/off circuit (OSCC)
d) CPU clock change circuit (CLKCHG)
e) SVD circuit on/off circuit (SVDON) Available only for the S1C63404/458/466/P466.
f) LCD power supply on/off circuit (LPWR)
g) LCD constant-voltage change circuit (VCCHG)
<Those that can only be counteracted by system or software>
h) Current consumed by the internal pull-up resistors
i) Input ports in a floating state
相關PDF資料
PDF描述
S1C6S2L7D 4-BIT, MROM, 0.032 MHz, MICROCONTROLLER, UUC58
S1C6S2A7F 4-BIT, MROM, 0.08 MHz, MICROCONTROLLER, PQFP60
S1C6S2B7F 4-BIT, MROM, 0.08 MHz, MICROCONTROLLER, PQFP60
S1C6S2N7D 4-BIT, MROM, 0.08 MHz, MICROCONTROLLER, UUC58
S1C6S2N7F0A0100 MICROCONTROLLER, PQFP60
相關代理商/技術參數
參數描述
S1C-6-S 制造商:GRIPCO 功能描述:
S1C7309X 制造商:SAMSUNG 制造商全稱:Samsung semiconductor 功能描述:B/W CCD PROCESSOR
S1C7309X01 制造商:SAMSUNG 制造商全稱:Samsung semiconductor 功能描述:B/W CCD PROCESSOR
S1C88349 制造商:EPSON 制造商全稱:EPSON 功能描述:8-bit Single Chip Microcomputer
S1C88649 制造商:EPSON 制造商全稱:EPSON 功能描述:8-bit Single Chip Microcomputer
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*