參數資料
型號： M393B1K73CH0-YH9
元件分類： DRAM
英文描述： 1G X 72 MULTI DEVICE DRAM MODULE, 0.255 ns, DMA240
封裝： HALOGEN FREE AND ROHS COMPLIANT, DIMM-240
文件頁數： 15/53頁
文件大?。?/td> 1492K
代理商： M393B1K73CH0-YH9
- 15 -
datasheet
DDR3L SDRAM
Rev. 1.01
Registered DIMM
11. Absolute Maximum Ratings
11.1 Absolute Maximum DC Ratings
NOTE :
1. Stresses greater than those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress rating only and functional operation of the
device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions
for extended periods may affect reliability.
2. Storage Temperature is the case surface temperature on the center/top side of the DRAM. For the measurement conditions, please refer to JESD51-2 standard.
3. VDD and VDDQ must be within 300mV of each other at all times;and VREF must be not greater than 0.6 x VDDQ, When VDD and VDDQ are less than 500mV; VREF may be
equal to or less than 300mV.
11.2 DRAM Component Operating Temperature Range
NOTE :
1. Operating Temperature TOPER is the case surface temperature on the center/top side of the DRAM. For measurement conditions, please refer to the JEDEC document
JESD51-2.
2. The Normal Temperature Range specifies the temperatures where all DRAM specifications will be supported. During operation, the DRAM case temperature must be main-
tained between 0-85
°C under all operating conditions
3. Some applications require operation of the Extended Temperature Range between 85
°C and 95°C case temperature. Full specifications are guaranteed in this range, but the
following additional conditions apply:
a) Refresh commands must be doubled in frequency, therefore reducing the refresh interval tREFI to 3.9us. It is also possible to specify a component with 1X refresh (tREFI
to 7.8us) in the Extended Temperature Range.
b) If Self-Refresh operation is required in the Extended Temperature Range, then it is mandatory to either use the Manual Self-Refresh mode with Extended Temperature
Range capability (MR2 A6 = 0b and MR2 A7 = 1b) or enable the optional Auto Self-Refresh mode (MR2 A6 = 1b and MR2 A7 = 0b)
12. AC & DC Operating Conditions
12.1 Recommended DC Operating Conditions (SSTL-15)
NOTE:
1. Under all conditions VDDQ must be less than or equal to VDD.
2. VDDQ tracks with VDD. AC parameters are measured with VDD and VDDQ tied together.
3. VDD & VDDQ rating are determinied by operation voltage.
Symbol
Parameter
Rating
Units
NOTE
VDD
Voltage on VDD pin relative to VSS
-0.4 V ~ 1.975 V
V
1,3
VDDQ
Voltage on VDDQ pin relative to VSS
-0.4 V ~ 1.975 V
V
1,3
VIN, VOUT
Voltage on any pin relative to VSS
-0.4 V ~ 1.975 V
V
1
TSTG
Storage Temperature
-55 to +100
°C
1, 2
Symbol
Parameter
rating
Unit
NOTE
TOPER
Operating Temperature Range
0 to 95
°C
1, 2, 3
Symbol
Parameter
Operation Voltage
Rating
Units
NOTE
Min.
Typ.
Max.
VDD
Supply Voltage
1.35V
1.2825
1.35
1.4500
V
1, 2, 3
1.5V
1.425
1.5
1.575
V
1, 2, 3
VDDQ
Supply Voltage for Output
1.35V
1.2825
1.35
1.4500
V
1, 2, 3
1.5V
1.425
1.5
1.575
V
1, 2, 3
相關PDF資料
PDF描述
M393B5273CH0-CK0 512M X 72 MULTI DEVICE DRAM MODULE, 0.225 ns, DMA240
M393B5773CH0-CK0 256M X 72 MULTI DEVICE DRAM MODULE, 0.225 ns, DMA240
M3950/1529A012 TOGGLE SWITCH, 3PDT, LATCHED, 4A, 28VDC, THROUGH HOLE-STRAIGHT
M83731/2327D110 TOGGLE SWITCH, 3PDT, MOMENTARY, 4A, 28VDC, THROUGH HOLE-STRAIGHT
M3950/1726A110 TOGGLE SWITCH, 3PDT, LATCHED, 4A, 28VDC, THROUGH HOLE-STRAIGHT
相關代理商/技術參數
參數描述
M393B1K73EB0 制造商:SAMSUNG 制造商全稱:Samsung semiconductor 功能描述:240pin Registered DIMM based on 2Gb E-die
M393B273DH0-CH9E8 制造商:Samsung Semiconductor 功能描述:4GB 2RX8 PC3-8500R-07-00-B0-D1 - Trays
M393B2873EH1 制造商:SAMSUNG 制造商全稱:Samsung semiconductor 功能描述:DDR3 SDRAM Memory
M393B2873EH1-CF8 制造商:ATP Electronics Inc 功能描述:M393B2873EH1-CF8 - Bulk
M393B2873FH0 制造商:SAMSUNG 制造商全稱:Samsung semiconductor 功能描述:DDR3 SDRAM Memory
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*