參數資料
型號： ISP1161
廠商： NXP Semiconductors N.V.
英文描述： Full-speed Universal Serial Bus single-chip host and device controller
中文描述： 全速通用串行總線的單芯片主機和設備控制器
文件頁數： 13/127頁
文件大小： 2762K
代理商： ISP1161
Philips Semiconductors
ISP1161
Full-speed USB single-chip host and device controller
Product data
Rev. 01 — 3 July 2001
13 of 130
9397 750 08313
Philips Electronics N.V. 2001. All rights reserved.
microprocessors can read or write ISP1161’s internal control registers and FIFO
buffer RAM through the parallel I/O (PIO) operating mode.
Figure 9
shows the parallel
I/O interface between a microprocessor and ISP1161.
8.2 DMA mode
ISP1161 also provides DMA mode for external microprocessors to access its internal
FIFO buffer RAM. Data can be transferred by DMA operation between a
microprocessor’s system memory and ISP1161’s internal FIFO buffer RAM. Note: the
DMA operation must be controlled by the external microprocessor system’s DMA
controller (Master).
Figure 10
shows the DMA interface between a microprocessor
system and ISP1161. ISP1161 provides two DMA channels: DMA channel 1
(controlled by DREQ1, DACK1 signals) is for the DMA transfer between a
microprocessor’s system memory and ISP1161 HC’s internal FIFO buffer RAM. DMA
channel 2 (controlled by DREQ2, DACK2 signals) is for the DMA transfer between a
microprocessor’s system memory and ISP1161 DC’s internal FIFO buffer RAM. The
EOT signal is an external end-of-transfer signal used to terminate the DMA transfer.
Some microprocessors may not have this signal. In this case, ISP1161 provides an
internal EOT signal to terminate the DMA transfer as well. Setting the
HcDMAConfiguration register (21H - Read, A1H - Write) enables ISP1161’s HC
internal DMA counter for DMA transfer. When the DMA counter reaches the value
that is set in the HcTransferCounter (22H - Read, A2H - Write) register to be used as
the byte count of the DMA transfer, the internal EOT signal will be generated to
terminate the DMA transfer.
Fig 9.
Parallel I/O interface between microprocessor and ISP1161.
MGT933
D[15:0]
RD
WR
CS
A2
IRQ2
MICRO-
PROCESSOR
ISP1161
D[15:0]
μ
P bus I/F
RD
WR
CS
A1
A1
IRQ1
A0
INT1
INT2
相關PDF資料
PDF描述
ISP1161A1 Universal Serial Bus single-chip host and device controller
ISP1161A1BD Universal Serial Bus single-chip host and device controller
ISP1161A1BM Universal Serial Bus single-chip host and device controller
ISP1161BD Full-speed Universal Serial Bus single-chip host and device controller
ISP1161BM Full-speed Universal Serial Bus single-chip host and device controller
相關代理商/技術參數
參數描述
ISP1161A 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Full-speed Universal Serial Bus single-chip host and device controller
ISP1161A1 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Universal Serial Bus single-chip host and device controller
ISP1161A1BD 功能描述:IC USB HOST/DEVICE CTRLR 64-LQFP RoHS:是 類別:集成電路 (IC) >> 接口 - 控制器 系列:- 標準包裝:4,900 系列:- 控制器類型:USB 2.0 控制器 接口:串行 電源電壓:3 V ~ 3.6 V 電流 - 電源:135mA 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:36-VFQFN 裸露焊盤 供應商設備封裝:36-QFN（6x6） 包裝:* 其它名稱:Q6396337A
ISP1161A1BD,118 功能描述:USB 接口集成電路 USB1.1 HOST &DEVICE RoHS:否 制造商:Cypress Semiconductor 產品:USB 2.0 數據速率: 接口類型:SPI 工作電源電壓:3.15 V to 3.45 V 工作電源電流: 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:WLCSP-20
ISP1161A1BD,151 功能描述:USB 接口集成電路 USB1.1 HOST &DEVICE RoHS:否 制造商:Cypress Semiconductor 產品:USB 2.0 數據速率: 接口類型:SPI 工作電源電壓:3.15 V to 3.45 V 工作電源電流: 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:WLCSP-20
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*