參數資料
型號: DS3120N
廠商: Maxim Integrated Products
文件頁數: 77/133頁
文件大?。?/td> 0K
描述: IC FRAMER T1 28-CHANNEL IND
標準包裝: 1
控制器類型: T1 調幀器
接口: 并行/串行
電源電壓: 2.97 V ~ 3.63 V
電流 - 電源: 300mA
工作溫度: -40°C ~ 85°C
安裝類型: 表面貼裝
封裝/外殼: 316-BGA
包裝: 管件
DS3112
48 of 133
5
T3/E3 FRAMER
On the receive side, the T3/E3 framer locates the frame boundaries of the incoming T3 or E3 data stream
and monitors the data stream for alarms and errors. Alarms are detected and reported in T3/E3 Status
Register (T3E3SR) and the T3/E3 Information Register (T3E3INFO), which are described in Section 5.3.
Errors are accumulated in a set of error counters (Section 5.4). The host can force the T3/E3 framer to
resynchronize via the T3E3RSY control bit in the MRID register (Section 4.1). On the transmit side, the
device formats the outgoing data stream with the proper framing pattern and overhead and can generate
alarms. It can also inject errors for diagnostic testing purposes (T3E3EIC register). The transmit side of
the framer is called the “formatter.”
The T3/E3 framer and formatter can be used in conjunction with the multiplexer or as a stand-alone
framer. This selection is made in the Master Configuration 1 (MC1) register (Section 4.2).
5.1 T3/E3 Line Loopback
The line loopback loops the incoming T3/E3 data (the HRCLK, HRPOS, and HRNEG inputs) directly
back to the transmit side (the HTCLK, HTPOS, and HTNEG outputs). When this loopback is enabled, the
incoming receive data continues to pass through the device but the data output from the T3/E3 formatter
is replaced with the data being input to the device. See the block diagrams in Section 1 for a visual
description of this loopback.
5.2 T3/E3 Diagnostic Loopback
The diagnostic loopback loops the outgoing T3/E3 data from the T3/E3 formatter back to receive side
framer. When this loopback is enabled, the incoming receive data at HRCLK, HRPOS, and HRNEG is
ignored. See the block diagrams in Section 1 for a visual description of this loopback. Please note that the
device can still generate AIS at the HTCLK, HTPOS, and HTNEG outputs when this loopback is
invoked. This is important to keep the data that is being looped back from disturbing downstream
equipment.
5.3 T3/E3 Payload Loopback
The payload loopback loops the framed T3/E3 data from the receive side framer back to the transmit side
formatter. When this loopback is enabled, the incoming receive data continues to pass through the device
but the data normally being input to the T3/E3 formatter is ignored. See the block diagrams in Section 1
for a visual description of this loopback.
相關PDF資料
PDF描述
DS31256+ IC CTRLR HDLC 256-CHANNEL 256BGA
DS3141+ IC FRAMER DS3/E3 SNGL 144CSBGA
DS31412N IC 12CH DS3/3 FRAMER 349-BGA
DS3150TN IC LIU T3/E3/STS-1 IND 48-TQFP
DS3154N+ IC LIU DS3/E3/STS-1 QD 144CSBGA
相關代理商/技術參數
參數描述
DS3121 功能描述:IC TGATOR T1-T3 AGGREGATOR RoHS:否 類別:集成電路 (IC) >> 接口 - 控制器 系列:- 標準包裝:4,900 系列:- 控制器類型:USB 2.0 控制器 接口:串行 電源電壓:3 V ~ 3.6 V 電流 - 電源:135mA 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:36-VFQFN 裸露焊盤 供應商設備封裝:36-QFN(6x6) 包裝:* 其它名稱:Q6396337A
DS3121N 功能描述:IC TGATOR T1-T3 AGGREGATOR IND RoHS:否 類別:集成電路 (IC) >> 接口 - 控制器 系列:- 標準包裝:4,900 系列:- 控制器類型:USB 2.0 控制器 接口:串行 電源電壓:3 V ~ 3.6 V 電流 - 電源:135mA 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:36-VFQFN 裸露焊盤 供應商設備封裝:36-QFN(6x6) 包裝:* 其它名稱:Q6396337A
DS31256 功能描述:輸入/輸出控制器接口集成電路 256Ch High Thruput HDLC Cntlr RoHS:否 制造商:Silicon Labs 產品: 輸入/輸出端數量: 工作電源電壓: 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 安裝風格:SMD/SMT 封裝 / 箱體:QFN-64 封裝:Tray
DS31256+ 功能描述:輸入/輸出控制器接口集成電路 256Ch High Thruput HDLC Cntlr RoHS:否 制造商:Silicon Labs 產品: 輸入/輸出端數量: 工作電源電壓: 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 安裝風格:SMD/SMT 封裝 / 箱體:QFN-64 封裝:Tray
DS31256B 功能描述:輸入/輸出控制器接口集成電路 256Ch High Thruput HDLC Cntlr RoHS:否 制造商:Silicon Labs 產品: 輸入/輸出端數量: 工作電源電壓: 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 安裝風格:SMD/SMT 封裝 / 箱體:QFN-64 封裝:Tray