NOTE
參數資料
型號： XRT83L314IB-L
廠商： Exar Corporation
文件頁數： 59/84頁
文件大?。?/td> 0K
描述： IC LIU T1/E1/J1 14CH 304TBGA
標準包裝： 27
類型： 線路接口裝置（LIU）
驅動器/接收器數： 14/14
規程： T1，E1，J1
電源電壓： 3.135 V ~ 3.465 V
安裝類型： 表面貼裝
封裝/外殼： 304-LBGA
供應商設備封裝： 304-TBGA（31x31）
包裝： 托盤
XRT83L314
14-CHANNEL T1/E1/J1 LONG-HAUL/SHORT-HAUL LINE INTERFACE UNIT
REV. 1.0.0
58
NOTE: The GIE bit in the global register 0xE0h must be set to "1" in addition to the individual register bits to enable the
interrupt pin.
TABLE 30: MICROPROCESSOR REGISTER 0X05H BIT DESCRIPTION
CHANNEL 0-13 (0X05H-0XD5H)
BIT
NAME
FUNCTION
Register
Type
Default
Value
(HW reset)
D7
EQFLAG
Equalizer Attenuation Flag
The equalizer attenuation flag is always active regardless if the
interrupt generation is disabled. This bit indicates the EQFLAG
activity. An interrupt will not occur unless the EQFLAGE is set to
"1" in the channel register 0x04h and GIE is set to "1" in the global
register 0xE0h.
0 = No Alarm
1 = Equalizer Attenuation Flag is Set
RO
0
D6
DMO
Digital Monitor Output
The digital monitor output is always active regardless if the inter-
rupt generation is disabled. This bit indicates the DMO activity. An
interrupt will not occur unless the DMOIE is set to "1" in the chan-
nel register 0x04h and GIE is set to "1" in the global register
0xE0h.
0 = No Alarm
1 = Transmit output driver has failures
RO
0
D5
FLS
FIFO Limit Status
The FIFO limit status is always active regardless if the interrupt
generation is disabled. This bit indicates whether the RD/WR
pointers are within 3-Bits. An interrupt will not occur unless the
FLSIE is set to "1" in the channel register 0x04h and GIE is set to
"1" in the global register 0xE0h.
0 = No Alarm
1 = RD/WR FIFO pointers are within ±3-Bits
RO
0
D4
LCV/OF
Line Code Violation / Counter Overflow
This bit serves a dual purpose. By default, this bit monitors the line
code violation activity. However, if bit 7 in register 0xE5h is set to a
"1", this bit monitors the overflow status of the internal LCV
counter. An interrupt will not occur unless the LCV/OFIE is set to
"1" in the channel register 0x04h and GIE is set to "1" in the global
register 0xE0h.
0 = No Alarm
1 = A line code violation, bipolar violation, or excessive zeros has
occurred
RO
0
D3
NLCD
Network Loop Code Detection
The network loop code detection is always active regardless if the
interrupt generation is disabled. This bit indicates the NLCD activ-
ity. An interrupt will not occur unless the NLCDIE is set to "1" in the
channel register 0x04h and GIE is set to "1" in the global register
0xE0h.
0 = No Alarm
1 = Network loop code detected according to the mode selected in
channel register 0x03h
RO
0
相關PDF資料
PDF描述
XRT83L34IV-F IC LIU T1/E1/J1 QUAD 128TQFP
XRT83L38IB-F IC LIU T1/E1/J1 OCTAL 225BGA
XRT83SH314IB-F IC LIU T1/E1/J1 14CH 304TBGA
XRT83SH38IB-F IC LIU SH T1/E1/J1 8CH 225BGA
XRT86L30IV-F IC LIU/FRAMER TI/E1/J1 SGL 128LQ
相關代理商/技術參數
參數描述
XRT83L34 制造商:EXAR 制造商全稱:EXAR 功能描述:QUAD T1/E1/J1 LH/SH TRANSCEIVER WITH CLOCK RECOVERY AND JITTER ATTENUATOR
XRT83L34_05 制造商:EXAR 制造商全稱:EXAR 功能描述:QUAD T1/E1/J1 LH/SH TRANSCEIVER WITH CLOCK RECOVERY AND JITTER ATTENUATOR
XRT83L34ES 功能描述:外圍驅動器與原件 - PCI RoHS:否 制造商:PLX Technology 工作電源電壓: 最大工作溫度: 安裝風格:SMD/SMT 封裝 / 箱體:FCBGA-1156 封裝:Tray
XRT83L34IV 功能描述:網絡控制器與處理器 IC RoHS:否 制造商:Micrel 產品:Controller Area Network (CAN) 收發器數量: 數據速率: 電源電流（最大值）:595 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:PBGA-400 封裝:Tray
XRT83L34IV-F 功能描述:網絡控制器與處理器 IC RoHS:否 制造商:Micrel 產品:Controller Area Network (CAN) 收發器數量: 數據速率: 電源電流（最大值）:595 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:PBGA-400 封裝:Tray
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*