參數資料
型號: VPX3224D
廠商: Electronic Theatre Controls, Inc.
英文描述: Video Pixel Decoders
中文描述: 視頻解碼器像素
文件頁數: 11/92頁
文件大?。?/td> 672K
代理商: VPX3224D
VPX 3225D, VPX 3224D
PRELIMINARY DATA SHEET
11
Micronas
2.2.3. Chrominance Filter
The demodulation is followed by a lowpass filter for the
color difference signals for PAL/NTSC. SECAM requires
a modified lowpass function with bell-filter characteristic.
At the output of the lowpass filter, all luma information is
eliminated.
The lowpass filters are calculated in time multiplex for
the two color signals. Four bandwidth settings (narrow,
normal, broad, wide) are available for each standard.
The filter passband can be shaped with an extra peaking
term at 1.25 MHz. For PAL/NTSC, a wide band chroma
filter can be selected. This filter is intended for high
bandwidth chroma signals; for example, a nonstandard
wide bandwidth S-VHS signal.
Fig. 2–5:
Frequency response of chroma filters
PAL/NTSC
SECAM
dB
MHz
0
0
1
2
3
4
5
–10
–20
–30
–40
–50
dB
MHz
0
0
1
2
3
4
5
–10
–20
–30
–40
–50
2.2.4. Frequency Demodulator
The frequency demodulator for demodulating the SE-
CAM signal is implemented as a CORDIC-structure. It
calculates the phase and magnitude of the quadrature
components by coordinate rotation.
The phase output of the CORDIC processor is differen-
tiated to obtain the demodulated frequency. After a pro-
grammable deemphasis filter, the Dr and Db signals are
scaled to standard C
r
C
b
amplitudes and fed to the cross-
over-switch.
2.2.5. Burst Detection
In the PAL/NTSC-system, the burst is the reference for
the color signal. The phase and magnitude outputs of
the CORDIC are gated with the color key and used for
controlling the phase-lock-loop (APC) of the demodula-
tor and the automatic color control (ACC) in PAL/NTSC.
The ACC has a control range of +30...–6 dB.
For SECAM decoding, the frequency of the burst is mea-
sured. Thus, the current chroma carrier frequency can
be identified and is used to control the SECAM proces-
sing. The burst measurements also control the color kill-
er operation; they can be used for automatic standard
detection as well.
2.2.6. Color Killer Operation
The color killer uses the burst-phase/burst-frequency
measurement to identify a PAL/NTSC or SECAM color
signal. For PAL/NTSC, the color is switched off (killed)
as long as the color subcarrier PLL is not locked. For SE-
CAM, the killer is controlled by the toggle of the burst fre-
quency. The burst amplitude measurement is used to
switch off the color if the burst amplitude is below a pro-
grammable threshold. Thus, color will be killed for very
noisy signals. The color amplitude killer has a program-
mable hysteresis.
2.2.7. PAL Compensation/1-H Comb Filter
The color decoder uses one fully integrated delay line.
Only active video is stored.
The delay line application depends on the color stan-
dard:
– NTSC:
1-H comb filter
or
color compensation
– PAL:
color compensation
– SECAM: crossover-switch
相關PDF資料
PDF描述
VPX3224E Video Pixel Decoders
VPX322XE Video Pixel Decoders
VQ1000J N-Channel Enhancement-Mode MOSFET Transistor(最小漏源擊穿電壓60V,夾斷電流0.225A的N溝道增強型MOSFET晶體管)
VQ1000J N-Channel 60-V (D-S) MOSFET
VQ1001J Dual N-Channel 30-V (D-S) MOSFET with Schottky Diode
相關代理商/技術參數
參數描述
VPX3224D-C3 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Microprocessor
VPX3224E 制造商:MICRONAS 制造商全稱:MICRONAS 功能描述:Video Pixel Decoders
VPX3225D 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Video Pixel Decoders
VPX3225D-C3 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Microprocessor
VPX3225E 制造商:MICRONAS 制造商全稱:MICRONAS 功能描述:Video Pixel Decoders