參數資料
型號: ST623X-EMU2
廠商: 意法半導體
英文描述: REAL TIME EMULATION DEVELOPMENT TOOLS FOR ST6 MCU FAMILY
中文描述: 實時仿真開發工具,ST6單片機系列
文件頁數: 12/86頁
文件大小: 531K
代理商: ST623X-EMU2
12/86
ST62T30B ST62E30B
MEMORY MAP
(Cont’d)
1.3.6
Data
(DRBR)
Address: CBh
RAM/EEPROM
Bank
Register
Write only
Bit 7-5 = These bits are not used
Bit 4 -
DRBR4
. This bit, when set, selects RAM
Page 2.
Bit 3 -
DRBR3
. This bit, when set, selects RAM
Page 1.
Bit2. This bit is not used.
Bit 1 -
DRBR1
. This bit, when set, selects
EEPROM Page 1.
Bit 0 -
DRBR0
. This bit, when set, selects
EEPROM Page 0.
The selection of the bankis madeby programming
the Data RAM Bank Switch register (DRBR regis-
ter) located at address CBh of the Data Space ac-
cording to Table 1. No more than one bank should
be set at a time.
The DRBR register can be addressed like a RAM
Data Space at the address CBh; nevertheless it is
a write only register that cannot be accessed with
single-bit operations.This register is used to select
the desired 64-byte RAM/EEPROM bank of the
Data Space. The number of banks has to be load-
ed in the DRBR register and the instruction has to
point to the selected location as if it was in bank 0
(from 00h address to 3Fh address).
This register is not cleared during the MCU initiali-
zation, therefore it must be written before the first
access to the Data Space bank region. Refer to
the Data Space description for additional informa-
tion. The DRBR register is not modified when an
interrupt or a subroutine occurs.
Notes
:
Care is required when handling the DRBR register
as it is write only. For this reason, it is not allowed
to change the DRBR contents while executing in-
terrupt service routine, as the service routine can-
not save and then restore its previous content. If it
is impossible to avoid the writing of this register in
interrupt service routine, an image of this register
must be saved in a RAM location, and each time
the program writes to DRBR it must write also to
the image register. The image register must be
written first, so if an interrupt occurs between the
two instructions the DRBR is not affected.
In DRBR Register, only 1 bit must be set. Other-
wise two or more pages are enabled in parallel,
producing errors.
Table 5. Data RAM Bank Register Set-up
7
0
-
-
-
DRBR4 DRBR3
-
DRBR1 DRBR0
DRBR
00
01
02
08
10h
other
ST62T30B/E30B
None
EEPROM Page 0
EEPROM Page 1
RAM Page 1
RAM Page 2
Reserved
相關PDF資料
PDF描述
ST62T65BB3 8-BIT MICROCONTROLLER
ST62T65BB6 8-BIT MICROCONTROLLER
ST62T65BM3 8-BIT MICROCONTROLLER
ST62T65BM6 8-BIT MICROCONTROLLER
ST62E65BF1 8-BIT MICROCONTROLLER
相關代理商/技術參數
參數描述
ST623X-KIT 制造商:未知廠家 制造商全稱:未知廠家 功能描述:STARTER KIT DATASHEET FOR ST6230
ST623X-KIT/110 功能描述:開發板和工具包 - 其他處理器 ST623X Starter Kit RoHS:否 制造商:Freescale Semiconductor 產品:Development Systems 工具用于評估:P3041 核心:e500mc 接口類型:I2C, SPI, USB 工作電源電壓:
ST623X-KIT/220 制造商:STMicroelectronics 功能描述:ST Development Kit, Including ST623X Starter Kit, Development Software CD-ROM, Parallel Cable, Power Supply, Window Development Devices ST62E30BF1, ST (More...)
ST623X-KIT/UK 制造商:STMICROELECTRONICS 制造商全稱:STMicroelectronics 功能描述:STARTER KIT AB 8K BYTE
ST-6-24 功能描述:XFRMR PWR 115V 12VAC 1.6A RoHS:是 類別:變壓器 >> 功率 系列:ST 標準包裝:1 系列:260 類型:標準 最大功率:65 VA 主線圈:雙 副線圈:三路,中心抽頭 在某電流時的串聯輸出電壓:500 VAC @ 85mA,5 VAC @ 2A,6.3 VAC @ 2A 在某電流時的并聯輸出電壓:- 安裝類型:底座安裝 尺寸/尺寸:102.36mm L x 67.31mm W 高度 - 座高(最大):66.80mm 端接類型:導線引線