參數資料
型號： SII3114CT176
元件分類： 總線控制器
英文描述： PCI BUS CONTROLLER, PQFP176
封裝： TQFP-176
文件頁數： 119/127頁
文件大?。?/td> 564K
代理商： SII3114CT176
SiI3114 PCI to Serial ATA Controller
Data Sheet
Silicon Image, Inc.
2007 Silicon Image, Inc.
83
SiI-DS-0103-D
Power Management
Power Management in the SiI3114 is controlled by the register bits described in Table 28.
Table 28. Power Management Register Bits
Register
Bits
Description
SMisc
PMCHG
Bit 6
This bit reports a change in the Power Management mode. It corresponds to the interrupt
enabled by bit 26 of SIEN.
SMisc
PMMODE
Bits 5,4
These bits report the power management mode status: bit 5 corresponds to Slumber mode;
bit 4 to Partial mode. A transition on either of these bits causes a Power Management mode
change interrupt.
SError
W
Bit 18
ComWake received from the Serial ATA bus
SMisc
ComWake
Bit 11
Generates a ComWake condition on the Serial ATA bus
SMisc
PMREQ
Bits 1,0
Generates a request from the Host for the Device to go to a Power Management state; bit 1
corresponds to Slumber mode; bit 0 corresponds to Partial mode. These bits are effective
regardless of the state of the HPMDS bit.
SControl
IPM
Bits 11-8
This bit field disables transitions to Partial or Slumber power management states; bit 9
corresponds to Slumber mode; bit 8 corresponds to Partial mode.
SStatus
IPM
Bits 11-8
This bit field reports the power management state; ‘0110’ corresponds to Slumber mode;
‘0010’ corresponds to Partial mode.
Power Management Summary
There are two power management modes: Partial and Slumber. These power management modes may be
software initiated through the SMisc register or device initiated from the Serial ATA device.
Transitions to and from either power management mode generate an interrupt, the Power Management Mode
Change Interrupt, which may be masked in the SMisc register (bit 26).
Partial Power Management Mode
Partial mode may be initiated by software through the SMisc register (bit 0). By setting the bit, the software
causes PMREQ_P primitives (Power Management REQuest – Partial) to be sent to the Serial ATA device, which
will respond with either a PMACK or PMNAK. If a PMACK is received the Partial mode is entered; A PMNAK is
ignored; the request remains asserted.
The Serial ATA device may initiate partial mode. This is indicated by the reception of PMREQ_P primitives from
the device. Software enables the acknowledgement of this request by setting the IPM value in the SControl
register to ‘00x1’ If enabled, a PMACK will be sent to the device; if not enabled, a PMNAK will be sent. When the
request is received and its acknowledgement is enabled, Partial mode is entered.
Partial mode status is reported in both the SStatus register (‘0010’ in the IPM field) and the SMisc register (bit 4).
Partial mode is cleared by setting the ComWake bit in the Smisc register. This will send a COMWAKE signal to
the device through the Serial ATA link to initiate a Partial to On sequence. Partial mode can also be cleared
through receipt of OOB signals from the device.
Slumber Power Management Mode
Slumber mode may be initiated by software through the SMisc register (bit 1). By setting the bit, software causes
PMREQ_S primitives to be sent to the Serial ATA device, which will respond with either a PMACK or PMNAK. If a
PMACK is received the Slumber mode is entered. A PMNAK is ignored; the request remains asserted.
The Serial ATA device may initiate slumber mode. This is indicated by the reception of PMREQ_S primitives.
Software enables the acknowledgement of this request by setting the IPM value in the SControl register to ‘001x’.
相關PDF資料
PDF描述
SII3114CTU PCI BUS CONTROLLER, PQFP176
SII3124ACBHU PCI BUS CONTROLLER, PBGA364
SII3512ECTU128 PCI BUS CONTROLLER, PQFP128
SII3531ACNU PCI BUS CONTROLLER, QCC48
SIO10N268-NU MULTIFUNCTION PERIPHERAL, PQFP128
相關代理商/技術參數
參數描述
SII3114CTU 制造商:Silicon Image Inc 功能描述:PCI to Serial ATA Controller 176-Pin TQFP 制造商:SILICON 功能描述:
SII3124A 制造商:SILICONIMAGE 制造商全稱:SILICONIMAGE 功能描述:PCI-X to Serial ATA Controller
SII3124ACBHU 制造商:SILICONIMAGE 制造商全稱:SILICONIMAGE 功能描述:PCI-X to Serial ATA Controller
SII3132 制造商:SILICONIMAGE 制造商全稱:SILICONIMAGE 功能描述:PCI Express to 2-Port Serial ATA II Host Controller
SII3132CNU 制造商:Silicon Image Inc 功能描述:PCI Express to Serial ATA Controller 88-Pin QFN
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*