參數資料
型號: M30240S9-XXXFP
廠商: Mitsubishi Electric Corporation
英文描述: 16 Characters x 2 Lines, 5x7 Dot Matrix Character and Cursor
中文描述: 單片16位CMOS微機
文件頁數: 55/142頁
文件大?。?/td> 1637K
代理商: M30240S9-XXXFP
1-55
Mitsubishi microcomputers
M30240 Group
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
Preliminary Specifications REV. E
Specifications in this manual are tentative and subject to change
Universal Serial Bus
2.18.4.8 USB Frame Number Registers
The USB Frame Number Low Register, shown in Figure 1.38, contains the lower 8 bits of the 11-bit frame
number received from the host. The USB Frame Number High Register, shown in Figure 1.39 contains the
upper 3 bits of the 11-bit frame number received from the host.
Figure 1.38: USB Frame Number Low Register
Figure 1.39: USB Frame Number High Register
2.18.4.9 USB ISO Control Register
The USB ISO Control Register, shown in Figure 1.40, contains two global bits, ISO_UPD and AUTO_FL for
controlling endpoints 1-4 isochronous data transfer.
When ISO_UPD = “0”, a data packet in an endpoint’s IN FIFO is always ‘ready to transmit’ upon receiving the
next IN_TOKEN from the host (with matched address and endpoint number) if the endpoint’s IN_PKT_RDY
is set.
When ISO_UPD = “1” and the ISO/TOGGLE_INIT bit of the corresponding endpoint’s IN CSR is set, the in-
ternal ‘ready to transmit’ signal to the transmit control logic is not activated when the endpoint’s IN_PKT_RDY
is set. Instead, it is activated when the next SOF is received, this way, the data loaded in frame n is transmitted
out in frame n+1. The ISO_UPD bit is a global bit for endpoints 1-4 and works with isochronous pipes only.
When AUTO_FL = “1”, ISO_UPD = “1”, a particular IN endpoint’s ISO/TOGGLE_INIT bit is set, and the IN
endpoint’s IN_PKT_RDY = “1”, the USB FCU detects a SOF packet and the USB FCU automatically flushes
the oldest packet from the IN FIFO. In this case, IN_PKT_RDY = “1”, indicates that two data packets are in
the IN FIFO. Because double buffering is a requirement for ISO transfer, MAXP must be set to less than or
equal to 1/2 of the FIFO size.
Figure 1.40:
USB ISO Control Register
USB Frame Number Low Register
Symbol
USBSOFL
Address
0306
16
When reset
00
16
Bit name
Bit symbol
b7
b6
b5
b4
b3
b2
b1
b0
FN0 to FN7
Function
W
R
Lower 8 bits of the 11-bit
frame number issued with a
SOF token
X
USB Frame Number High Register
Symbol
USBSOFH
Address
0307
16
When reset
00
16
Bit name
Bit symbol
b7
0 0 0 0 0
b6
b5
b4
b3
b2
b1
b0
FN8
FN9
FN10
Function
W
R
Upper 3 bits of the 11-bit
frame number issued with a
SOF token
Reserved
Must always be set to "0"
X
X
USB ISO Control Register
Symbol
USBISOC
Address
0308
16
When reset
00
16
Bit name
Bit symbol
b7
b6
b5
0 0 0 0 0 0
b4
b3
b2
b1
b0
Function
W
R
Reserved
Must always be set to "0"
AUTO_FL
ISO_UPD
AUTO_FLUSH Bit
ISO_UPDATE Bit
0 : Hardware auto FIFO flush diabled
1 : Hardware auto FIFO flush enabled
0 : ISO_UPDATE disabled
1 : ISO_UPDATE enabled
相關PDF資料
PDF描述
M30245M4-XXXGF SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
M30245F4-XXXGF SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
M30245M8-XXXGF SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
M30245F8-XXXGF SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
M30245F8-XXXFP SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
相關代理商/技術參數
參數描述
M30240SA 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
M30240SA-XXXFP 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
M30240SC 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
M30240SC-XXXFP 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
M30245 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER