N2206 MS PC 20060921-S00002 / 71306 MS OT 20060529-S00004 No.A0466-1/18
■ Any and all SANYO Semiconductor products described or contained herein do not have specifications
that can handle applications that require extremely high levels of reliability, such as life-support systems,
aircraft’s control systems, or other applications whose failure can be reasonably expected to result in
serious physical and/or material damage. Consult with your SANYO Semiconductor representative
nearest you before using any SANYO Semiconductor products described or contained herein in such
applications.
■ SANYO Semiconductor assumes no responsibility for equipment failures that result from using products
at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition
ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor
products described or contained herein.
LV24010LP
Overview
The LV24010LP is single-chip FM radio with RDS tuner IC that requires absolutely no external components. This design
was achieved by combining Sanyo BiCMOS process technology, Sanyo packaging technology, and filtering circuit
technology developed by Semiconductor Ideas to the Market (ItoM) B.V.
Functions
FM FE.
FM IF.
MPX stereo decoder.
Tuning.
Standby.
RDS.
Specifications
Maximum Ratings at Ta = 25
°C
Parameter
Symbol
Conditions
Ratings
unit
VCC max
Analog block supply voltage
5.0
V
Maximum supply voltage
VDD max
Digital block supply voltage
4.5
V
VIN1 max
Clock, Data, NR-W
VDD+0.3
V
Maximum input voltage
VIN2 max
Extenal_clk_in
VDD+0.3
V
Allowable power dissipation
Pd max
Ta
≤70°C *
140
mW
Storage temperature
Tstg
-40 to +125
°C
Operating temperature
Topr
-20 to +70
°C
*: With 40
× 50× 0.8mm3, glass epoxy substrate
Operating Conditions at Ta = 25
°C
Parameter
Symbol
Conditions
Ratings
unit
VCC
Analog block supply voltage
3.0
V
Recommended supply voltage
VDD
Digital block supply voltage
3.0
V
VCC op
2.7 to 5.0
V
VDD op
2.5 to 4.0
V
Operating supply voltage range
VIO op
Interface voltage
1.8 to 4.0
V
Note: The application voltage of VIO to be used must be either equal to VDD or the VDD value or less (VIO ≤ VDD).
Ordering number : ENA0466
Bi-CMOS LSI
Compact Portable Equipment
1-Chip FM+RDS Tuner IC