參數資料
型號： IDT72T6360L7-5BBI
廠商： IDT, Integrated Device Technology Inc
文件頁數： 19/51頁
文件大?。?/td> 0K
描述： IC FLOW-CTRL 48BIT 7-5NS 324-BGA
標準包裝： 1
類型： 連續流量控制
安裝類型： 表面貼裝
封裝/外殼： 324-BGA
供應商設備封裝： 324-PBGA（19x19）
包裝： 托盤
其它名稱： 72T6360L7-5BBI
26
IDT72T6360 2.5V, SEQUENTIAL FLOW-CONTROL DEVICE
x9, x18, x36 BIT WIDE CONFIGURATION
COMMERCIALANDINDUSTRIAL
TEMPERATURERANGES
FEBRUARY 10, 2009
EMPTY FLAG (
EF/OR)
This is a dual purpose pin. In the IDT Standard mode, the Empty Flag (
EF)
function is selected. When the SFC is empty,
EFwillgoLOW,inhibitingfurther
read operations. When
EF is HIGH, the SFC is not empty. Figure 10, Empty
Boundary – IDT Standard Mode for the relevant timing information.
In FWFT mode, the Output Ready (
OR)functionisselected.ORgoesLOW
atthesametimethatthefirstwordwrittentoanemptySFCappearsvalidonthe
outputs.
ORstaysLOWaftertheRCLKLOWtoHIGHtransitionthatshiftsthe
last word from the SFC to the outputs.
OR goes HIGH only with a true read
(RCLK with
REN = LOW). The previous data stays at the outputs, indicating
the last word was read. Further data reads are inhibited until
OR goes LOW
again. See Figure 11, Empty Boundary (FWFT Mode), for the relevant timing
information.
EF/OR is synchronous and updated on the rising edge of RCLK.
In IDT Standard mode,
EF is a double register-buffered output. In FWFT
mode,
OR isatripleregister-bufferedoutput.
PROGRAMMABLE ALMOST-FULL FLAG (
PAF)
The Programmable Almost-Full flag (
PAF) will go LOW when the SFC
reaches the almost-full condition. In IDT Standard mode, if no reads are
performed after reset (
MRS),PAF will go LOW after (D - m) words are written
to the SFC. See Figure 22, Synchronous
PAFFlag-IDTStandardModeand
FWFT Mode, for the relevant timing information.
If asynchronous
PAFconfigurationisselected,thePAFisassertedLOWon
the LOW-to-HIGH transition of the Write Clock (WCLK).
PAFisresettoHIGH
ontheLOW-to-HIGHtransitionoftheReadClock(RCLK). Ifsynchronous
PAF
configuration is selected, the
PAF is updated on the rising edge of WCLK.
PROGRAMMABLE ALMOST-EMPTY FLAG (
PAE)
The Programmable Almost-Empty flag (
PAE) will go LOW when the SFC
reaches the almost-empty condition. In IDT Standard mode,
PAEwillgoLOW
whentherearenwordsorlessintheSFC.Theoffset“n”istheemptyoffsetvalue.
The default setting for this value is in Table 10, Device Configuration.
In FWFT mode, the
PAE will go LOW when there are n+1 words or less in
the SFC. See Figure 21, Synchronous
PAE Flag - IDT Standard Mode and
FWFT Mode, for the relevant timing information.
Ifasynchronous
PAEconfigurationisselected,thePAEisassertedLOWon
the LOW-to-HIGH transition of the Read Clock (RCLK).
PAEisresettoHIGH
ontheLOW-to-HIGHtransitionoftheWriteClock(WCLK). Ifsynchronous
PAE
configuration is selected, the
PAE is updated on the rising edge of RCLK.
DATA OUTPUTS (Q0-Q35)
(Q0-Q35) are data outputs for 36-bit wide data, (Q0 - Q17) are data outputs
for 18-bit wide data or (Q0-Q8) are data outputs for 9-bit wide data.
MEMORY CLOCK OUTPUT (CK)
These signals are to be connected to the external DDR SDRAM's clock
input.
MEMORY CLOCK OUTPUT INVERTED (
CK)
ThesesignalsaretobeconnectedtotheexternalDDRSDRAM'sdifferential
clockinput.
MEMORY BANK ADDRESS INPUT BIT (BA[1:0])
These signals are to be connected to the external DDR SDRAM's bank
address input bits.
MEMORY COLUMN ADDRESS STROBE (
CAS)
These signals are to be connected to the external DDR SDRAM's column
address strobe input.
MEMORY ADDRESS BUS (A[12:0])
These signals are to be connected to the external DDR SDRAM's address
bus.
MEMORY WRITE ENABLE (
WE)
These signals are to be connected to the external DDR SDRAM's write
enable.
MEMORY ROW ADDRESS STROBE (
RAS)
These signals are to be connected to the external DDR SDRAM's row
address strobe input.
BI-DIRECTIONAL I/O
MEMORY DATA INPUTS/OUTPUTS DQ[63:0]
These signals are to be connected to the external DDR SDRAM's data input
bus.
MEMORY DATA STROBE OUTPUT DQS[7:0]
ThesesignalsaretobeconnectedtotheexternalDDRSDRAM'sdatastrobe
inputs.
相關PDF資料
PDF描述
IDT72V51256L7-5BBI IC FLOW CTRL MULTI QUEUE 256-BGA
IDT72V51453L7-5BBI IC FLOW CTRL MULTI QUEUE 256-BGA
IDT72V51456L7-5BBI IC FLOW CTRL MULTI QUEUE 256-BGA
IDT77V500S25PF IC SW MEMORY 8X8 1.2BGPS 100TQFP
IDT79RC32H434-400BCG IC MPU 32BIT CORE 400MHZ 256-BGA
相關代理商/技術參數
參數描述
IDT72T6480L10BB 功能描述:IC FLOW-CTRL 48BIT 10NS 324-BGA RoHS:否 類別:集成電路 (IC) >> 專用 IC 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:1 系列:- 類型:調幀器 應用:數據傳輸 安裝類型:表面貼裝 封裝/外殼:400-BBGA 供應商設備封裝:400-PBGA（27x27） 包裝:散裝
IDT72T6480L10BBI 功能描述:IC FLOW-CTRL 48BIT 10NS 324-BGA RoHS:否 類別:集成電路 (IC) >> 專用 IC 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:1 系列:- 類型:調幀器 應用:數據傳輸 安裝類型:表面貼裝 封裝/外殼:400-BBGA 供應商設備封裝:400-PBGA（27x27） 包裝:散裝
IDT72T6480L7-5BB 功能描述:IC FLOW-CTRL 48BIT 7-5NS 324-BGA RoHS:否 類別:集成電路 (IC) >> 專用 IC 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:1 系列:- 類型:調幀器 應用:數據傳輸 安裝類型:表面貼裝 封裝/外殼:400-BBGA 供應商設備封裝:400-PBGA（27x27） 包裝:散裝
IDT72T6480L7-5BBG 功能描述:IC FLOW-CTRL 48BIT 7-5NS 324-BGA RoHS:是 類別:集成電路 (IC) >> 專用 IC 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:1 系列:- 類型:調幀器 應用:數據傳輸 安裝類型:表面貼裝 封裝/外殼:400-BBGA 供應商設備封裝:400-PBGA（27x27） 包裝:散裝
IDT72T72105L10BB 功能描述:IC FIFO 65536X72 10NS 324-BGA RoHS:否 類別:集成電路 (IC) >> 邏輯 - FIFO 系列:72T 標準包裝:15 系列:74F 功能:異步 存儲容量:256（64 x 4） 數據速率:- 訪問時間:- 電源電壓:4.5 V ~ 5.5 V 工作溫度:0°C ~ 70°C 安裝類型:通孔 封裝/外殼:24-DIP（0.300"，7.62mm） 供應商設備封裝:24-PDIP 包裝:管件 其它名稱:74F433
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*