- 您現在的位置：買賣IC網 > PDF目錄385344 > GS9035CCPJ (Gennum Corporation) GENLINX II -TM GS9035C Serial Digital Reclocker PDF資料下載
參數資料
| 型號： | GS9035CCPJ |
| 廠商： | Gennum Corporation |
| 英文描述： | GENLINX II -TM GS9035C Serial Digital Reclocker |
| 中文描述： | GENLINX二，商標GS9035C串行數字時鐘恢復器 |
| 文件頁數： | 1/14頁 |
| 文件大小： | 490K |
| 代理商： | GS9035CCPJ |
GENNUM CORPORATION P.O. Box 489, Stn. A, Burlington, Ontario, Canada L7R 3Y3
Tel. +1 (905) 632-2996 Fax. +1 (905) 632-5946 E-mail: info@gennum.com
www.gennum.com
Revision Date: June 2003
Document No. 20582 - 3
DATA SHEET
G
FEATURES
adjustment-free operation
auto-rate selection for 4 SMPTE data rates: 143, 177,
270, 360Mb/s
data rate indication output
serial data output mute when PLL is not locked
operation independent of SAV/EAV sync signals
low jitter, low power
single external VCO resistor for operation with four
input data rates
large input jitter tolerance: typically 0.50 UI beyond
loop bandwidth at 270Mb/s
power savings mode (output serial clock disable)
system friendly: serial clock remains active when data
outputs muted
robust lock detect
APPLICATIONS
The GS9035C is used for Clock and Data recovery, and
Jitter elimination for all high speed serial digital interface
applications involving SMPTE 259M and other data
standards.
DESCRIPTION
The GS9035C is a high performance clock and data
recovery IC designed for serial digital data. The GS9035C
receives either single-ended or differential PECL data and
outputs differential PECL clock and retimed data signals.
The GS9035C can operate in either auto or manual rate
selection mode. In auto mode the GS9035C is ideal for
multi-rate serial data protocols such as SMPTE 259M. In this
mode the GS9035C automatically detects and locks onto
the incoming data signal. For single rate data systems, the
GS9035C can be configured to operate in manual mode. In
both modes, the GS9035C requires only one external
resistor to set the VCO centre frequency and provides
adjustment-free operation.
The GS9035C has dedicated pins to indicate LOCK and
data rate. In addition, an internal muting function forces the
serial data outputs to a static state when input data is not
present or when the PLL is not locked. The serial clock
outputs can also be disabled resulting in a 10% power
savings.
The GS9035C is packaged in a 28 pin PLCC and operates
from a single +5 or -5 volt power supply.
BLOCK DIAGRAM
ORDERING INFORMATION
PART NUMBER
PACKAGE
TEMPERATURE
GS9035CCPJ
28 pin PLCC
0°C to 70°C
GS9035CCTJ
28 pin PLCC Tape
0°C to 70°C
DDI/DDI
LF+ LFS LF-
CBG R
VCO
CARRIER DETECT
PHASELOCK
HARMONIC
FREQUENCY
ACQUISITION
VCO
DIVISION
2 BIT
COUNTER
LOCK
SDO
SDO
CLK_EN
SCO
SCO
SMPTE
AUTO/MAN
SSO
SS1
2
PHASE
DETECTOR
CHARGE
PUMP
DECODER
LOGIC
C
OSC
GS9035C
Serial Digital Reclocker
相關PDF資料 |
PDF描述 |
|---|---|
| GS9035CCTJ | GENLINX II -TM GS9035C Serial Digital Reclocker |
| GS9062-CF | GS9062 HD-LINX-TM II SD-SDI and DVB-ASI Serializer |
| GS9062-CFE3 | GS9062 HD-LINX-TM II SD-SDI and DVB-ASI Serializer |
| GS9064-CKD | GS9064 SD SDI Adaptive Cable Equalizer |
| GS9064-CKDE3 | GS9064 SD SDI Adaptive Cable Equalizer |
相關代理商/技術參數 |
參數描述 |
|---|---|
| GS9035CCTJ | 制造商:GENNUM 制造商全稱:GENNUM 功能描述:GENLINX II -TM GS9035C Serial Digital Reclocker |
| GS9060 | 制造商:GENNUM 制造商全稱:GENNUM 功能描述:HD-LINX II SD-SDI and DVB-ASI Deserializer with Loop-Through Cable Driver |
| GS9060-CF | 制造商:Rochester Electronics LLC 功能描述:- Bulk 制造商:Gennum Corporation 功能描述: |
| GS9060-CFE3 | 制造商:Semtech Corporation 功能描述: 制造商:Semtech Corporation 功能描述:Receiver for SD-SDI & DVB-ASI |
發布緊急采購，3分鐘左右您將得到回復。