![](http://datasheet.mmic.net.cn/Analog-Devices-Inc/ADV7189BBSTZ_datasheet_96351/ADV7189BBSTZ_19.png)
ADV7189B
Rev. B | Page 19 of 104
GLOBAL STATUS REGISTERS
Four registers provide summary information about the video
decoder. The IDENT register allows the user to identify the
revision code of the ADV7189B. The other three registers
contain status bits from the ADV7189B.
IDENTIFICATION
IDENT[7:0] Address 0x11[7:0]
This register provides identification of the revision of
the ADV7189B.
An identification value of 0x11 indicates the ADV7189,
released silicon.
An identification value of 0x13 indicates the ADV7189B silicon.
STATUS 1
STATUS_1[7:0] Address 0x10[7:0]
This read-only register provides information about the internal
status of the ADV7189B. These bits are used to set VS free run
(coast) frequency. See the
161H
VS_Coast[1:0], Address
0xF9[3:2]section and
162H
COL[2:0] Count Out-of-Lock, Address
0x51[5:3] for information on the timing.
Depending on the setting of the FSCLE bit, the Status[0] and
Status[1] are based solely on horizontal timing information or
on the horizontal timing and lock status of the color subcarrier.
See the
163H
FSCLE FSC Lock Enable, Address 0x51[7] section.
SD AUTODETECTION RESULT
AD_RESULT[2:0] Address 0x10[6:4]
The AD_RESULT[2:0] bits report back on the findings from
the autodetection block. For more information on enabling
the autodetection block, see the
164H
General Setup section. For
information on configuring it, see the
165H
Autodetection of SD
Modes section.
Table 14. AD_RESULT Function
AD_RESULT[2:0]
Description
000
NTSM-MJ
001
NTSC-443
010
PAL-M
011
PAL-60
100
PAL-BGHID
101
SECAM
110
PAL-Combination N
111
SECAM 525
Table 15. STATUS 1 Function
STATUS 1[7:0]
Bit Name
Description
0
IN_LOCK
In lock (right now).
1
LOST_LOCK
Lost lock (since last read of
this register).
2
FSC_LOCK
FSC locked (right now).
3
FOLLOW_PW
AGC follows peak white
algorithm.
4
AD_RESULT.0
Result of autodetection.
5
AD_RESULT.1
Result of autodetection.
6
AD_RESULT.2
Result of autodetection.
7
COL_KILL
Color kill active.
STATUS 2
STATUS_2[7:0], Address 0x12[7:0]
Table 16. STATUS 2 Function
STATUS 2[7:0]
Bit Name
Description
0
MVCS DET
Detected Macrovision color
striping.
1
MVCS T3
Macrovision color striping
protection. Conforms to
Type 3 if high, to Type 2 if
low.
2
MV_PS DET
Detected Macrovision
pseudo sync pulses.
3
MV_AGC DET
Detected Macrovision AGC
pulses.
4
LL_NSTD
Line length is nonstandard.
5
FSC_NSTD
FSC frequency is
nonstandard.
6
Reserved
7
Reserved
STATUS 3
STATUS_3[7:0], Address 0x13[7:0]
Table 17. STATUS 3 Function
STATUS 3[7:0]
Bit Name
Description
0
INST_HLOCK
Horizontal lock indicator
(instantaneous).
1
GEMD
Gemstar Detect.
2
SD_OP_50HZ
Flags whether 50 Hz or
60 Hz is present at output.
3
Reserved for future use.
4
FREE_RUN_ACT
ADV7189B outputs a blue
screen (see the
166H
DEF_VAL_EN
Default Value Enable,
Address 0x0C[0] section).
5
STD_FLD_LEN
Field length is correct for
currently selected video
standard.
6
INTERLACED
Interlaced video detected
(field sequence found).
7
PAL_SW_LOCK
Reliable sequence of
swinging bursts detected.