![](http://datasheet.mmic.net.cn/Analog-Devices-Inc/ADN2819ACPZ-CML_datasheet_100770/ADN2819ACPZ-CML_1.png)
Multirate to 2.7 Gb/s Clock and Data
Recovery IC with Integrated Limiting Amp
ADN2819
Rev. B
Information furnished by Analog Devices is believed to be accurate and reliable.
However, no responsibility is assumed by Analog Devices for its use, nor for any
infringements of patents or other rights of third parties that may result from its use.
Specifications subject to change without notice. No license is granted by implication
or otherwise under any patent or patent rights of Analog Devices. Trademarks and
registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
Fax: 781.326.8703
2004 Analog Devices, Inc. All rights reserved.
FEATURES
Meets SONET requirements for jitter
transfer/generation/tolerance
Quantizer sensitivity: 4 mV typical
Adjustable slice level: ±100 mV
1.9 GHz minimum bandwidth
Patented clock recovery architecture
Loss of signal detect range: 3 mV to 15 mV
Single reference clock frequency for all rates, including
15/14 (7%) wrapper rate
Choice of 19.44 MHz, 38.88 MHz, 77.76 MHz, or 155.52 MHz
REFCLK
LVPECL/LVDS/LVCMOS/LVTTL compatible inputs
(LVPECL/LVDS only at 155.52 MHz)
19.44 MHz oscillator on-chip to be used with external crystal
Loss of lock indicator
Loopback mode for high speed test data
Output squelch and bypass features
Single-supply operation: 3.3 V
Low power: 540 mW typical
7 mm × 7 mm 48-lead LFCSP
APPLICATIONS
SONET OC-3/-12/-48, SDH STM-1/-4/-16, GbE and 15/14
FEC rates
WDM transponders
Regenerators/repeaters
Test equipment
Backplane applications
PRODUCT DESCRIPTION
The ADN2819 provides the receiver functions of quantization,
signal level detect, and clock and data recovery at rates of OC-3,
OC-12, OC-48, Gigabit Ethernet, and 15/14 FEC rates. All
SONET jitter requirements are met, including jitter transfer,
jitter generation, and jitter tolerance. All specifications are
quoted for –40°C to +85°C ambient temperature, unless
otherwise noted.
The device is intended for WDM system applications, and can
be used with either an external reference clock or an on-chip
oscillator with external crystal. Both native rates and 15/14 rate
digital wrappers are supported by the ADN2819, without any
change of reference clock.
This device, together with a PIN diode and a TIA preamplifier,
can implement a highly integrated, low cost, low power, fiber
optic receiver.
The receiver front end signal detect circuit indicates when the
input signal level has fallen below a user-adjustable threshold.
The signal detect circuit has hysteresis to prevent chatter at the
output.
The ADN2819 is available in a compact 7 mm × 7 mm, 48-lead
chip scale package.
FUNCTIONAL BLOCK DIAGRAM
LEVEL
DETECT
DATA
RETIMING
DIVIDER
1/2/4/16
FRACTIONAL
DIVIDER
FREQUENCY
LOCK
DETECTOR
LOOP
FILTER
PHASE
SHIFTER
PHASE
DET.
VCO
XTAL
OSC
LOOP
FILTER
QUANTIZER
/n
ADN2819
SLICEP/N
VCC
VEE
CF1
CF2
LOL
REFSEL[0..1]
REFCLKP/N
XO1
XO2
REFSEL
SEL[0..2]
CLKOUTP/N
DATAOUTP/N
SDOUT
THRADJ
VREF
NIN
PIN
2
3
02999-0-001
Figure 1.