參數資料
型號： UPD16682W
廠商： NEC Corp.
英文描述： 1/65 DUTY LCD CONTROLLER/DRIVER WITH ON-CHIP RAM
中文描述： 1 / 65稅LCD控制器/驅動器，片內RAM
文件頁數： 55/56頁
文件大?。?/td> 435K
代理商： UPD16682W
Data Sheet S13368EJ3V0DS00
55
μ
PD16682
NOTES FOR CMOS DEVICES
1
PRECAUTION AGAINST ESD FOR SEMICONDUCTORS
Note:
Strong electric field, when exposed to a MOS device, can cause destruction of the gate oxide and
ultimately degrade the device operation. Steps must be taken to stop generation of static electricity
as much as possible, and quickly dissipate it once, when it has occurred. Environmental control
must be adequate. When it is dry, humidifier should be used. It is recommended to avoid using
insulators that easily build static electricity. Semiconductor devices must be stored and transported
in an anti-static container, static shielding bag or conductive material. All test and measurement
tools including work bench and floor should be grounded. The operator should be grounded using
wrist strap. Semiconductor devices must not be touched with bare hands. Similar precautions need
to be taken for PW boards with semiconductor devices on it.
2
HANDLING OF UNUSED INPUT PINS FOR CMOS
Note:
No connection for CMOS device inputs can be cause of malfunction. If no connection is provided
to the input pins, it is possible that an internal input level may be generated due to noise, etc., hence
causing malfunction. CMOS devices behave differently than Bipolar or NMOS devices. Input levels
of CMOS devices must be fixed high or low by using a pull-up or pull-down circuitry. Each unused
pin should be connected to V
DD
or GND with a resistor, if it is considered to have a possibility of
being an output pin. All handling related to the unused pins must be judged device by device and
related specifications governing the devices.
3
STATUS BEFORE INITIALIZATION OF MOS DEVICES
Note:
Power-on does not necessarily define initial status of MOS device. Production process of MOS
does not define the initial operation status of the device. Immediately after the power source is
turned ON, the devices with reset function have not yet been initialized. Hence, power-on does
not guarantee out-pin levels, I/O settings or contents of registers. Device is not initialized until the
reset signal is received. Reset operation must be executed immediately after power-on for devices
having reset function.
相關PDF資料
PDF描述
UPD16700 256-OUTPUT TFT-LCD GATE DRIVER
UPD16700N DUSTCAP, METAL SZ22; Material:Zinc Alloy; Colour:Nickel Plated; Connector shell size:22; Voltage rating, AC:750V; Series:TRIM TRIO
UPD16803 MONOLITHIC DUAL H BRIDGE DRIVER CIRCUIT
UPD16803GS MONOLITHIC DUAL H BRIDGE DRIVER CIRCUIT
UPD168103AK9-5B4-A 5-CHANNEL OPERATIONAL AMPLIFIER, IRIS DRIVER, AND 4-CHANNEL H-BRIDGE DRIVER
相關代理商/技術參數
參數描述
UPD16686 制造商:未知廠家 制造商全稱:未知廠家 功能描述:UPD16686.16687 Data Sheet | Data Sheet[07/2001]
UPD16686P 制造商:NEC 制造商全稱:NEC 功能描述:1/128 DUTY LCD CONTROLLER/DRIVER WITH FOUR-LEVEL GRAY SCALE, ON-CHIP RAM
UPD16686W 制造商:NEC 制造商全稱:NEC 功能描述:1/128 DUTY LCD CONTROLLER/DRIVER WITH FOUR-LEVEL GRAY SCALE, ON-CHIP RAM
UPD16687 制造商:未知廠家 制造商全稱:未知廠家 功能描述:UPD16686.16687 Data Sheet | Data Sheet[07/2001]
UPD16687P 制造商:NEC 制造商全稱:NEC 功能描述:1/128 DUTY LCD CONTROLLER/DRIVER WITH FOUR-LEVEL GRAY SCALE, ON-CHIP RAM
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*