參數資料
型號: ST52440G2
英文描述: MAX 7000 CPLD 64 MC 44-TQFP
中文描述: 8位重癥監護病房與定時器/脈寬調制。模擬比較器??煽毓? PWM定時器。水分散粒劑。提供了8K存儲器
文件頁數: 48/88頁
文件大?。?/td> 1162K
代理商: ST52440G2
ST52T430/E430
Figure 10.4 PWM Mode with Auto Reload
EDGE(Period Counter): After reset, on the first
T0STRT rising edge, TIMER 0 starts counting and
at the next rising edge it stops. In this manner, the
period of an external signal may be measured.
Timer x output signal, TIMERxOUT is a signal with
a frequency equal to the 16 bit-Prescaler x output
signal, TMRCLKx, divided by the Output Register
PWM_x_COUNT value (8 bit) (Output Registers 3,
5 or 7. See Table 2.4), which is the value to count.
There can be two types of TIMERxOUT waveform:
type 1: TIMERxOUT waveform equal to a square
wave with a 50% duty-cycle.
type 2: TIMERxOUT waveform equal to a pulse
signal with the pulse duration equal to the
Prescaler x output signal.
For each Timer x, the TIMERxOUT waveform type
can be selected by setting the correspondent
TMRWx bit of REG_CONF6, REG_CONF9 and
REG_CONF11 registers (see Table 10.2, Table
10.2 PWM Mode
For each timer, PWM working mode is obtained by
setting
the
correspondent
TxMODE
bits
of
REG_CONF5, REG_CONF8 and REG_CONF10
registers to 1 (see Table 10.1, Table 10.4 and
TIMERxOUT, in PWM Mode consists of a signal
with a fixed period, whose duty cycle can be
modified by the user.
The TIMERxOUT signal can be available on the
TxOUT pin and the TIMERxOUT inverted signal
can be available on the TxOUT pin by setting the
PxSL bits of REG_CONF12 and REG_CONF16
The PWM TIMERxOUT period can be determined
by setting the 16-bit prescaler x output and an
initial autoreload 8-bit counter value stored in the
Output Register PWM_x_RELOAD, as illustrated
NOTE: the Start/Stop and Set/Reset signals
should be moved together in PWM mode. If the
Start/Stop bit is reset during the PWM mode
working, the TxOUT signal keeps its status
until the next start.
t
255
compare
value
reload
register
0
PWM
Output
Ton
T
相關PDF資料
PDF描述
ST52440G3 MAX 7000 CPLD 64 MC 44-TQFP
ST52501LF1 MAX 7000 CPLD 128 MC 84-PLCC
ST52501LF2 MAX 7000 CPLD 128 MC 100-TQFP
ST52501LF3 MAX 7000 CPLD 128 MC 100-PQFP
ST52501LG1 MAX 7000 CPLD 128 MC 160-PQFP
相關代理商/技術參數
參數描述
ST52440G3 制造商:未知廠家 制造商全稱:未知廠家 功能描述:8-BIT ICU WITH TIMER/PWM. ANALOG COMPARATOR. TRIAC/PWM TIMER. WDG. UP TO 8K EPROM
ST5-24B19 功能描述:電源變壓器 SPLIT BOBBIN HORZ MOUNT XFMR RoHS:否 制造商:Triad Magnetics 功率額定值:12 VA 初級電壓額定值:115 V / 230 V 次級電壓額定值:12 V / 24 V 安裝風格:SMD/SMT 一次繞組:Dual Primary Winding 二次繞組:Dual Secondary Winding 長度:2.5 in 寬度:2 in 高度:1.062 in
ST525 制造商:未知廠家 制造商全稱:未知廠家 功能描述:TRANSISTOR | BJT | NPN | 200V V(BR)CEO | 5A I(C) | TO-3
ST52501LF1 制造商:未知廠家 制造商全稱:未知廠家 功能描述:8-BIT ICU WITH IR DRIVER. TIMER/PWM. I2C. SPI. SCI. LOW VOLTAGE
ST52501LF2 制造商:未知廠家 制造商全稱:未知廠家 功能描述:8-BIT ICU WITH IR DRIVER. TIMER/PWM. I2C. SPI. SCI. LOW VOLTAGE