參數資料
型號： RF3000
廠商： RF Micro Devices, Inc.
英文描述： SPREAD-SPECTRUM BASEBAND MODEM
中文描述： 擴譜基帶調制解調器
文件頁數： 18/28頁
文件大小： 351K
代理商： RF3000
11-338
RF3000
Rev A4 031216
Block Diagram Breakout
The following sections describe each of the blocks, as indicated in the block diagram, that comprise the RF3000.
Modulator
PSK Modes
The RF3000 uses a proprietary architecture that allows the modulation of PSK signals by simply reprogramming the part
via the control port. The transmitted data stream is first spread and the resulting data stream is modulated.
CCK Mode
IEEE802.11b Preamble/Header Creation and Assembly
The RF3000 provides circuitry to generate and assemble a preamble and header as specified in the IEEE802.11b spec-
ification. The short preamble option for 2Mbps, 5.5Mbps and 11Mbps, as specified in IEEE802.11b, is selectable in the
mode control register. The RF3000 will transmit these fields along with a protective CRC-16 for error detection. For other
protocols, the preamble/header circuitry is disabled, and packet structures should be generated externally.
Demodulator
PSK Modes
The RF3000 uses a proprietary architecture that allows the demodulation of PSK signals by simply reprogramming the
part via the control port. The received signal is first de-spread and the PSK signal is recovered.
CCK Mode
In order to perform CCK demodulation, circuitry is provided to pass the output of the A/D converters to a fast Walsh
transform (FWT). The output of the FWT is then passed to decision circuitry to determine the received signal.
IEEE802.11b Preamble/Header Detection and Extraction
Circuitry is provided to search the incoming data for start frame delimiter (SFD) and to obtain length field information as
well as modulation type. In 802.11 modes, this circuitry is always active since the preamble and header tells the PHY
which modulation type the data packet is using. The RF3000 will also check the preamble/header field for errors by
checking the CRC-16 field for errors.
Data Converters
The RF3000 contains all A/D converters and D/A converters required to implement a transceiver.
A/D Converters
I/Q A/Ds - These are 4-bit analog-to-digital converters used to sample the data according to the mode of the RF3000.
D/A Converters
Four (4) digital-to-analog converters are present for transmitter VGC, receiver VGC, I Out, and Q Out.
RSSI, CCA and AGC
Scramblers
Scramblers for whitening the spectrum are provided, as specified in IEEE802.11b.
SCRAMBLER NOTE: The data scrambler defined by IEEE802.11b has a probability of 1/128, to lock up scrambling
when random data is followed by a repetitive pattern. The patterns identified are: all 0's; all 1’s; repetitive 01's; repeated
0011's; and, repeated 000111's. Once the pattern ceases the scrambler will resume its normal operation.
相關PDF資料
PDF描述
RF3000PCBA SPREAD-SPECTRUM BASEBAND MODEM
RF2046PCBA-41X GENERAL PURPOSE AMPLIFIER
RF2114 TRI R RECP F FLG SEAL 0-4
RF2114PCBA MEDIUM POWER LINEAR AMPLIFIER
RF2115 HIGH POWER UHF AMPLIFIER
相關代理商/技術參數
參數描述
RF-3000 制造商:RFMD 制造商全稱:RF Micro Devices 功能描述:SPREAD-SPECTRUM BASEBAND MODEM
RF3000PCBA 制造商:RFMD 制造商全稱:RF Micro Devices 功能描述:SPREAD-SPECTRUM BASEBAND MODEM
RF-3000PCBA 制造商:RFMD 制造商全稱:RF Micro Devices 功能描述:SPREAD-SPECTRUM BASEBAND MODEM
RF300-12 功能描述:高頻/射頻繼電器 12V DC-6GHz .15W RoHS:否 制造商:Omron Electronics 觸點形式:2 Form C (DPDT-BM) 觸點電流額定值: 線圈電壓:5 VDC 線圈類型:Non-Latching 頻率: 功耗:100 mW 端接類型:Solder Terminal 絕緣:20 dB to 30 dB at 1 GHz 介入損耗:0.2 dB at 1 GHz
RF300-12/G 制造商:Teledyne Relays 功能描述:RF RELAY
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*