參數資料
型號: MT90883IG
廠商: Zarlink Semiconductor Inc.
英文描述: TDM to Packet Processors
中文描述: TDM到分組處理器
文件頁數: 78/97頁
文件大?。?/td> 702K
代理商: MT90883IG
MT90880/1/2/3
Data Sheet
78
Zarlink Semiconductor Inc.
Figure 37 - Detailed DPLL Jitter Transfer Function Diagram
All outputs are derived from the same signal, therefore these diagrams apply to all outputs. Using the method
mentioned above, the jitter attenuation can be calculated for all combinations of inputs and outputs.
Frame alignment
When operating in master mode, the incoming frame reference is used solely as a frequency reference. There
is no requirement on the width of the frame pulse. The output frame pulse must therefore be used as the master
for the devices connected to the MT9088x's WAN Access Interface. There is no guaranteed phase relationship
between the input frame pulse and the output master frame pulse.
6.13.2 Slave Mode
Slave mode is used where the master clock and frame references are provided externally. Both the incoming
and outgoing streams are timed using the external reference, bypassing the DPLL. The DPLL locks to the
incoming clock and frame pulse, and is used solely to generate the internal clocks required by the device.
The input frequency combinations and frame pulse widths for correct slave mode operation are given in Table 7
on page 16. These correspond to the data formats selected for the WAN Access Interface.
When operating in slave mode, the MT9088x is capable of accepting timing references with jitter meeting ITU-T
standards G.823 and G.824 when operating in either Generic E1 or ST-Bus formats at 2.048 Mbs. When
operating in ST-bus format at 8.192 Mbs, the maximum allowable input jitter above 10 KHz is 61 ns (1 UI at the
input clock rate of 16.384 MHz). This translates to 0.125 UI at 2.048 MHz, or just outside the G.824 specification
of 0.2 UI.
6.13.3 Free-run Mode
In the Free-run Mode, the DPLL provides timing and synchronization signals, which are based on the frequency
of the master clock (S_CLK) only, and are not synchronized to a reference input. The DPLL outputs have a
frequency accuracy of
±
0.005 ppm plus the accuracy of the master clock. For example, clock output C8OB will
have a frequency of 8.192 MHz
±
S_CLK accuracy
±
0.005 ppm).
相關PDF資料
PDF描述
MT9088IG TDM to Packet Processors
MT8960 Integrated PCM Filter Codec
MT8963AE1 Integrated PCM Filter Codec
MAQ2901CL Circular Connector; No. of Contacts:85; Series:; Body Material:Aluminum Alloy; Connecting Termination:Solder; Connector Shell Size:40; Circular Contact Gender:Socket; Circular Shell Style:Wall Mount Receptacle RoHS Compliant: No
MAQ2901CS Circular Connector; No. of Contacts:1; Series:; Body Material:Aluminum Alloy; Connecting Termination:Solder; Connector Shell Size:10S; Circular Contact Gender:Pin; Circular Shell Style:Wall Mount Receptacle; Insert Arrangement:10S-2 RoHS Compliant: No
相關代理商/技術參數
參數描述
MT9088IG 制造商:ZARLINK 制造商全稱:Zarlink Semiconductor Inc 功能描述:TDM to Packet Processors
MT9092 制造商:MITEL 制造商全稱:Mitel Networks Corporation 功能描述:ISO2-CMOS ST-BUS⑩ FAMILY Digital Telephone with HDLC (HPhone-II)
MT9092AP 制造商:Microsemi Corporation 功能描述:
MT9092AP1 制造商:Zarlink Semiconductor Inc 功能描述:DGTL TEL 44PLCC - Rail/Tube 制造商:Zarlink Semiconductor Inc 功能描述:PB FREE H-PHONE-PLUS PLCC
MT9092APR 制造商:Microsemi Corporation 功能描述:DGTL TEL 44PLCC - Tape and Reel