參數資料
型號: KP80524NY450128
英文描述: Microprocessor
中文描述: 微處理器
文件頁數: 15/81頁
文件大?。?/td> 598K
代理商: KP80524NY450128
Mobile Intel
Celeron Processor (0.18μ) in BGA2 and Micro-PGA2 Packages
Order Number#249563-001
Datasheet
15
until STPCLK# is deasserted. A transition to the Sleep state can be made by the assertion of the
SLP# signal.
While in the Stop Grant state, assertions of FLUSH#, SMI#, INIT#, INTR, and NMI (or
LINT[1:0]) will be latched by the processor. These latched events will not be serviced until the
processor returns to the Normal state. Only one of each event will be recognized upon return to the
Normal state.
2.2.5
Quick Start State
This is a mode entered by the processor with the assertion of the STPCLK# signal when it is
configured for the Quick Start state (via the A15# strapping option). In the Quick Start state the
processor is only capable of acting on snoop transactions generated by the system bus priority
device. Because of its snooping behavior, Quick Start can only be used in a uniprocessor (UP)
configuration.
A transition to the Deep Sleep state can be made by stopping the clock input to the processor. A
transition back to the Normal state (from the Quick Start state) is made only if the STPCLK#
signal is deasserted.
While in this state the processor is limited in its ability to respond to input. It is incapable of
latching any interrupts, servicing snoop transactions from symmetric bus masters or responding to
FLUSH# or BINIT# assertions. While the processor is in the Quick Start state, it will not respond
properly to any input signal other than STPCLK#, RESET#, or BPRI#. If any other input signal
changes, then the behavior of the processor will be unpredictable. No serial interrupt messages
may begin or be in progress while the processor is in the Quick Start state.
RESET# assertion will cause the processor to immediately initialize itself, but the processor will
stay in the Quick Start state after initialization until STPCLK# is deasserted.
2.2.6
HALT/Grant Snoop State
The processor will respond to snoop transactions on the system bus while in the Auto Halt, Stop
Grant, or Quick Start state. When a snoop transaction is presented on the system bus the processor
will enter the HALT/Grant Snoop state. The processor will remain in this state until the snoop has
been serviced and the system bus is quiet. After the snoop has been serviced, the processor will
return to its previous state. If the HALT/Grant Snoop state is entered from the Quick Start state,
then the input signal restrictions of the Quick Start state still apply in the HALT/Grant Snoop
state, except for those signal transitions that are required to perform the snoop.
2.2.7
Sleep State
The Sleep state is a very low-power state in which the processor maintains its context and the
phase-locked loop (PLL) maintains phase lock. The Sleep state can only be entered from the Stop
Grant state. After entering the Stop Grant state, the SLP# signal can be asserted, causing the
processor to enter the Sleep state. The SLP# signal is not recognized in the Normal or Auto Halt
states.
The processor can be reset by the RESET# signal while in the Sleep state. If RESET# is driven
active while the processor is in the Sleep state then SLP# and STPCLK# must immediately be
driven inactive to ensure that the processor correctly initializes itself.
相關PDF資料
PDF描述
RH8053GC017512 Microprocessor
RH8053GC021512 Microprocessor
RH8053GC025512 Microprocessor
RH8053GC029512 Microprocessor
RH8053GC033512 Microprocessor
相關代理商/技術參數
參數描述
KP80526NY700128 制造商:Rochester Electronics LLC 功能描述:- Bulk 制造商:Intel 功能描述:
KP80S 3601F200 制造商:STKE 功能描述:
KP80S 3602F100 制造商:STKE 功能描述:
KP80S1801F100 制造商:STK ELECTRONICS 功能描述:
KP80S2202J600 制造商:n/a 功能描述:AF322X600 5%