參數資料
型號： IDT82P2821BH
廠商： IDT, Integrated Device Technology Inc
文件頁數： 104/151頁
文件大小： 0K
描述： IC LIU T1/J1/E1 21+1CH 640-PBGA
標準包裝： 5
功能： 線路接口單元（LIU）
接口： E1，J1，T1
電路數： 1
電源電壓： 1.8V, 3.3V
工作溫度： -40°C ~ 85°C
安裝類型： 表面貼裝
封裝/外殼： 640-BGA 裸露焊盤
供應商設備封裝： 640-PBGA-EP（31x31）
包裝： 托盤
包括： 缺陷和警報檢測，驅動器過流檢測和保護，LLOS 檢測，PRBSARB / IB 檢測和生成
其它名稱： 82P2821BH
IDT82P2821
21(+1) CHANNEL HIGH-DENSITY T1/E1/J1 LINE INTERFACE UNIT
Functional Description
56
February 6, 2009
3.5.8.3 Digital Loopback
The Digital Loopback can be configured manually or automatically.
Either manual Digital Loopback configuration or automatic Digital Loop-
back configuration will enable Digital Loopback.
Manual Digital Loopback is enabled by the DLP bit (b2, LOOP,...).
Automatic Digital Loopback is enabled when the pattern detection is
assigned in the transmit path (i.e., the PD_POS bit (b3, PD,...) is ‘1’) and
the AUTOLP bit (b3, LOOP,...) is ‘1’. The corresponding channel will
enter Digital Loopback when the activate IB code is detected in the
transmit path for more than 5.1 sec.; and will return from Digital Loop-
back when the deactivate IB code is detected in the transmit path for
more than 5.1 sec. Refer to section Inband Loopback (IB) Detection on
page 50 for details. When automatic Digital Loopback is active, setting
the AUTOLP bit (b3, LOOP,...) back to ‘0’ will also stop automatic Digital
Loopback. The setting of the PD_POS bit (b3, PD,...) should not be
changed during automatic Digital Loopback. The AUTOLP_S bit (b7,
STAT0,...) indicates the automatic Digital Loopback status.
In Digital Loopback mode, the data stream output from the TJA (if
enabled) is internally looped to the Decoder (if enabled). The data
stream to be transmitted is still output to the line side, while the data
stream received from the line side is covered by the Digital Loopback
data. However, LLOS and AIS detection in the receive path still monitors
the data stream received from the line side.
In Digital Loopback mode, the priority of the diagnostic facilities in the
receive path is: pattern generation > looped data; the priority of the diag-
nostic facilities in the transmit path is: pattern generation > looped data >
AIS generation. AIS generation is disabled in the receive path.
Figure-34 Priority Of Diagnostic Facilities During Digital Loopback
Tx path
BPV/CV, EXZ,
SLOS, AIS, pattern
detection
Pattern generation
AIS generation
Rx path
LLOS, AIS
detection
AIS generation
X
BPV/CV, EXZ,
AIS, pattern
detection
Pattern generation
Digital
Loopback
相關PDF資料
PDF描述
IDT82P2828BHG IC LIU T1/J1/E1 28+1CH 640-PBGA
IDT82P2916BFG IC LIU T1/E1/J1 16CH SH 484BGA
IDT82P5088BBG IC LIU T1/E1/J1 OCTAL 256PBGA
IDT82V2041EPPG IC LIU T1/J1/E1 1CH 44-TQFP
IDT82V2042EPFG IC LIU T1/J1/E1 2CH SHORT 80TQFP
相關代理商/技術參數
參數描述
IDT82P2821BHG 功能描述:IC LINE INTERFACE UNIT 640-PBGA RoHS:是 類別:集成電路 (IC) >> 接口 - 電信 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS 產品變化通告:Product Discontinuation 06/Feb/2012 標準包裝:750 系列:*
IDT82P2828 制造商:IDT 制造商全稱:Integrated Device Technology 功能描述:28(+1) Channel High-Density T1/E1/J1 Line Interface Unit
IDT82P2828BH 功能描述:IC LIU T1/J1/E1 28+1CH 640-PBGA RoHS:否 類別:集成電路 (IC) >> 接口 - 驅動器，接收器，收發器 系列:- 標準包裝:250 系列:- 類型:收發器 驅動器/接收器數:2/2 規程:RS232 電源電壓:3 V ~ 5.5 V 安裝類型:表面貼裝 封裝/外殼:16-TSSOP（0.173"，4.40mm 寬） 供應商設備封裝:16-TSSOP 包裝:帶卷 (TR)
IDT82P2828BHG 功能描述:IC LIU T1/J1/E1 28+1CH 640-PBGA RoHS:是 類別:集成電路 (IC) >> 接口 - 驅動器，接收器，收發器 系列:- 標準包裝:250 系列:- 類型:收發器 驅動器/接收器數:2/2 規程:RS232 電源電壓:3 V ~ 5.5 V 安裝類型:表面貼裝 封裝/外殼:16-TSSOP（0.173"，4.40mm 寬） 供應商設備封裝:16-TSSOP 包裝:帶卷 (TR)
IDT82P2916 制造商:IDT 制造商全稱:Integrated Device Technology 功能描述:16-Channel High-Density T1/E1/J1 Line Interface Unit
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*