REV. 1.4.3 32 4.4 Automatic Hardware (RTS/CTS or DTR/DSR) Flow Control Operation Automatic hard" />
參數資料
型號： XR17C158IV
廠商： Exar Corporation
文件頁數： 26/67頁
文件大?。?/td> 0K
描述： IC UART PCI BUS OCTAL 144LQFP
產品變化通告： Leaded UART, V&I Obsolescence 11/Apr/2011
標準包裝： 60
特點： *
通道數： 8
FIFO's： 64 字節
規程： RS485
電源電壓： 4.5 V ~ 5.5 V
帶自動流量控制功能： 是
帶IrDA 編碼器/解碼器： 是
帶故障啟動位檢測功能： 是
帶調制解調器控制功能： 是
安裝類型： 表面貼裝
封裝/外殼： 144-LQFP
供應商設備封裝： 144-LQFP（20x20）
包裝： 托盤
XR17C158
xr
5V PCI BUS OCTAL UART
REV. 1.4.3
32
4.4
Automatic Hardware (RTS/CTS or DTR/DSR) Flow Control Operation
Automatic hardware RTS/CTS or DTR/DSR flow control is used to prevent data overrun to the local receiver
FIFO and remote receiver FIFO. The RTS#/DTR# output pin is used to request the remote unit to suspend/
restart data transmission while the CTS#/DSR# input pin is monitored to suspend/restart the local transmitter.
The auto RTS/CTS or DTR/DSR flow control features are individually selected to fit specific application
requirement and enabled through EFR bit-6 and 7 and MCR bit-2 for either RTS/CTS or DTR/DSR control
signals.
Auto RTS flow control must be started by asserting the RTS# output pin LOW (MCR bit-1 = 1). Similarly, Auto
DTR flow control must be started by asserting the DTR# output pin LOW (MCR bit-0 = 1). Figure 14 shows in
detail how automatic hardware flow control works.
Two interrupts associated with auto RTS/CTS and DTR/DSR flow control have been added to give indication
when RTS#/DTR# pin or CTS#/DSR# pin are de-asserted during operation. These interrupts are enabled by:
Setting EFR bit-4 =1 to enable the shaded register bits
Setting IER bit-7 will enable the CTS#/DSR# interrupt when these pins are de-asserted. The selection of
CTS# or DSR# is selected via MCR bit-2. See Table 10 above for complete details.
Setting IER bit-6 will enable the RTS#/DTR# interrupt when these pins are de-asserted. The selection of
RTS# or DTR# is selected via MCR bit-2. See Table 10 above for complete details.
Automatic hardware flow control is selected by setting bits 6 (RTS) and 7 (CTS) of the EFR register to logic 1.
If CTS# pin transitions from LOW to HIGH indicating a flow control request, ISR bit-5 will be set to logic 1, (if
enabled via IER bit 6-7), and the UART will suspend TX transmissions as soon as the stop bit of the character
in process is shifted out. Transmission is resumed after the CTS# input returns LOW, indicating more data may
be sent.
TABLE 10: AUTO RTS/CTS OR DTR/DSR FLOW CONTROL SELECTION
MCR BIT-2
EFR BIT-7
EFR BIT-6
FLOW CONTROL SELECTION
0
1
X
Auto CTS Flow Control Enabled
0
X
1
Auto RTS Flow Control Enabled
1
X
Auto DSR Flow Control Enabled
1
X
1
Auto DTR Flow Control Enabled
X
0
No Flow Control
相關PDF資料
PDF描述
V24B24H150B2 CONVERTER MOD DC/DC 24V 150W
VI-B74-IX-F3 CONVERTER MOD DC/DC 48V 75W
MS27474T14B35SD CONN RCPT 37POS JAM NUT W/SCKT
XR17C158CV IC UART PCI BUS OCTAL 144LQFP
V24B24H150B CONVERTER MOD DC/DC 24V 150W
相關代理商/技術參數
參數描述
XR17C158IV-F 功能描述:UART 接口集成電路 UART RoHS:否 制造商:Texas Instruments 通道數量:2 數據速率:3 Mbps 電源電壓-最大:3.6 V 電源電壓-最小:2.7 V 電源電流:20 mA 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝 / 箱體:LQFP-48 封裝:Reel
XR17C158IVTR-F 制造商:Exar Corporation 功能描述:UART 8-CH 64Byte FIFO 5V 144-Pin LQFP T/R 制造商:Exar Corporation 功能描述:XR17C158IVTR-F
XR17D152 制造商:EXAR 制造商全稱:EXAR 功能描述:UNIVERSAL (3.3V AND 5V) PCI BUS DUAL UART
XR17D152CM 制造商:EXAR 制造商全稱:EXAR 功能描述:UNIVERSAL (3.3V AND 5V) PCI BUS DUAL UART
XR17D152CM-0A-EVB 功能描述:界面開發工具 Supports D152 100 ld TQFP, PCI Interface RoHS:否 制造商:Bourns 產品:Evaluation Boards 類型:RS-485 工具用于評估:ADM3485E 接口類型:RS-485 工作電源電壓:3.3 V
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*