- 您現在的位置：買賣IC網 > PDF目錄371251 > X4003 Standard Recovery Rectifier; Repetitive Reverse Voltage Max, Vrrm:1600V; Forward Current Avg Rectified, IF(AV):70A; Non Repetitive Forward Surge Current Max, Ifsm:1150A; Forward Voltage Max, VF:1.5V; Package/Case:DO-203AB PDF資料下載
參數資料
| 型號： | X4003 |
| 英文描述： | Standard Recovery Rectifier; Repetitive Reverse Voltage Max, Vrrm:1600V; Forward Current Avg Rectified, IF(AV):70A; Non Repetitive Forward Surge Current Max, Ifsm:1150A; Forward Voltage Max, VF:1.5V; Package/Case:DO-203AB |
| 中文描述： | CPU監控 |
| 文件頁數： | 3/18頁 |
| 文件大?。?/td> | 378K |
| 代理商： | X4003 |
X4003/X4005
Characteristics subject to change without notice.
3 of 18
REV 1.1.3 4/30/02
www.xicor.com
PRINCIPLES OF OPERATION
Power On Reset
Application of power to the X4003/X4005 activates a
power on reset circuit that pulls the RESET/RESET pin
active. This signal provides several benefits.
– It prevents the system microprocessor from starting
to operate with insufficient voltage.
– It prevents the processor from operating prior to
stabilization of the oscillator.
– It allows time for an FPGA to download its configura-
tion prior to initialization of the circuit.
When V
CC
exceeds the device V
for 200ms (nominal) the circuit releases RESET/
RESET, allowing the system to begin operation.
TRIP
threshold value
Low Voltage Monitoring
During operation, the X4003/X4005 monitors the V
level and asserts RESET/RESET if supply voltage falls
below a preset minimum V
signal prevents the microprocessor from operating in a
power fail or brownout condition. The RESET/RESET
CC
TRIP
. The RESET/RESET
signal remains active until the voltage drops below 1V.
It also remains active until V
V
TRIP
for 200ms.
CC
returns and exceeds
Watchdog Timer
The watchdog timer circuit monitors the microproces-
sor activity by monitoring the SDA and SCL pins. The
microprocessor must toggle the SDA pin HIGH to LOW
periodically, while SCL also toggles from HIGH to LOW
(this is a start bit) followed by a stop condition prior to
the expiration of the watchdog time out period to pre-
vent a RESET/RESET signal. The state of two nonvol-
atile control bits in the control register determine the
watchdog timer period. The microprocessor can
change these watchdog bits, or they may be “l(fā)ocked”
by tying the WP pin HIGH.
Figure 1. Watchdog Restart
SCL
SDA
.6μs
.6μs
Start
Condition
Stop
Condition
Restart
Set V
TRIP
Level Sequence (V
CC
= desired V
TRIP
value)
0
1
2
4
5 6
7
SCL
SDA
A0h
0
1
2 3
4
5 6
7
01h
WP
V
P
= 15-18V
0
1
2 3
4
5 6
7
00h
3
V
CC
THRESHOLD RESET PROCEDURE
The X4003/X4005 is shipped with a standard V
threshold (V
TRIP
) voltage. This value will not change
over normal operating and storage conditions. How-
ever, in applications where the standard V
exactly right, or if higher precision is needed in the
V
TRIP
value, the X4003/X4005 threshold may be
adjusted. The procedure is described below, and uses
the application of a nonvolatile control signal.
CC
TRIP
is not
Setting the V
This procedure is used to set the V
voltage value. For example, if the current V
and the new V
TRIP
is 4.6V, this procedure will directly
make the change. If the new setting is to be lower than
the current setting, then it is necessary to reset the trip
point before setting the new value.
TRIP
Voltage
TRIP
to a higher
is 4.4V
TRIP
相關PDF資料 |
PDF描述 |
|---|---|
| X4003S8I | THYRISTOR, 32A 1200V B-2THYRISTOR, 32A 1200V B-2; Voltage, Vrrm:1200V; Current, It av:24A; Case style:B2; Current, It rms:50A; Current, Itsm:450A; Voltage, Vgt:3.0V; Current, Igt:100mA; Thread size:M6; Thyristor/Triac t |
| X4003S8I-2.7 | Thyristor Diode Module; Leaded Process Compatible:Yes |
| X4003S8I-2.7A | RTC Module With CPU Supervisor |
| X4005 | THYRISTOR, CAPSULE, 550A; Thyristor/Triac type:Thyristor; Voltage, Vdrm:1200V; Current, It rms:1200A; Current, Itsm:9000A; Current, Igt:250mA; Voltage, Vgt:1.65V; Case style:TO-200; Current, It av:550A; Diameter, External:41mm; RoHS Compliant: Yes |
| X4005M8I | SCR Thyristor; Peak Repetitive Off-State Voltage, Vdrm:1600V; On-State RMS Current, IT(rms):1200A; Peak Non Repetitive Surge Current, Itsm:9000A; Current, It av:550A; Package/Case:B11; Peak Reflow Compatible (260 C):Yes RoHS Compliant: Yes |
相關代理商/技術參數 |
參數描述 |
|---|---|
| X4003_06 | 制造商:INTERSIL 制造商全稱:Intersil Corporation 功能描述:CPU Supervisor |
| X40030 | 制造商:INTERSIL 制造商全稱:Intersil Corporation 功能描述:Triple Voltage Monitor with Intergrated CPU Supervisor |
| X40030_06 | 制造商:INTERSIL 制造商全稱:Intersil Corporation 功能描述:Triple Voltage Monitor with Integrated CPU Supervisor |
| X40030_13 | 制造商:INTERSIL 制造商全稱:Intersil Corporation 功能描述:Triple Voltage Monitor with Integrated CPU Supervisor |
| X40030A | 制造商:INTERSIL 制造商全稱:Intersil Corporation 功能描述:Triple Voltage Monitor with Integrated CPU Supervisor |
發布緊急采購，3分鐘左右您將得到回復。