參數資料
型號： TZA1047HL/M1B
廠商： NXP SEMICONDUCTORS
元件分類： 消費家電
英文描述： SPECIALTY CONSUMER CIRCUIT, PQFP64
封裝： 10 X 10 MM, 1.4 MM HEIGHT, PLASTIC, MS-026, SOT314-2, LQFP-64
文件頁數： 62/69頁
文件大?。?/td> 324K
代理商： TZA1047HL/M1B
9397 750 14664
Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet
Rev. 02 — 1 June 2005
65 of 69
Philips Semiconductors
TZA1047
Preprocessor IC for CD and DVD rewritable
Use a double-wave soldering method comprising a turbulent wave with high upward
pressure followed by a smooth laminar wave.
For packages with leads on two sides and a pitch (e):
– larger than or equal to 1.27 mm, the footprint longitudinal axis is preferred to be
parallel to the transport direction of the printed-circuit board;
– smaller than 1.27 mm, the footprint longitudinal axis must be parallel to the
transport direction of the printed-circuit board.
The footprint must incorporate solder thieves at the downstream end.
For packages with leads on four sides, the footprint must be placed at a 45
° angle to
the transport direction of the printed-circuit board. The footprint must incorporate
solder thieves downstream and at the side corners.
During placement and before soldering, the package must be xed with a droplet of
adhesive. The adhesive can be applied by screen printing, pin transfer or syringe
dispensing. The package can be soldered after the adhesive is cured.
Typical dwell time of the leads in the wave ranges from 3 seconds to 4 seconds at 250
°C
or 265
°C, depending on solder material applied, SnPb or Pb-free respectively.
A mildly-activated ux will eliminate the need for removal of corrosive residues in most
applications.
13.4 Manual soldering
Fix the component by rst soldering two diagonally-opposite end leads. Use a low voltage
(24 V or less) soldering iron applied to the at part of the lead. Contact time must be
limited to 10 seconds at up to 300
°C.
When using a dedicated tool, all other leads can be soldered in one operation within
2 seconds to 5 seconds between 270
°C and 320 °C.
13.5 Package related soldering information
[1]
For more detailed information on the BGA packages refer to the
(LF)BGA Application Note (AN01026);
order a copy from your Philips Semiconductors sales ofce.
Table 29:
Suitability of surface mount IC packages for wave and reow soldering methods
Package [1]
Soldering method
Wave
Reow [2]
BGA, HTSSON..T [3], LBGA, LFBGA, SQFP,
SSOP..T [3], TFBGA, VFBGA, XSON
not suitable
suitable
DHVQFN, HBCC, HBGA, HLQFP, HSO, HSOP,
HSQFP, HSSON, HTQFP, HTSSOP, HVQFN,
HVSON, SMS
not suitable [4]
suitable
PLCC [5], SO, SOJ
suitable
LQFP, QFP, TQFP
not recommended [5] [6]
suitable
SSOP, TSSOP, VSO, VSSOP
not recommended [7]
suitable
CWQCCN..L [8], PMFP [9], WQCCN..L [8]
not suitable
相關PDF資料
PDF描述
TZA1047HL/M2 SPECIALTY CONSUMER CIRCUIT, PQFP64
TZA1047HL/M3 SPECIALTY CONSUMER CIRCUIT, PQFP64
TZA1049TH SPECIALTY CONSUMER CIRCUIT, PDSO28
1N5376ATR TRANS PNP HV -300V -500MA TO-92
1N5376BTR TRANS PNP HV -200V -1000MA TO-92
相關代理商/技術參數
參數描述
TZA1048 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:4-channel BTL driver for CD/DVD drives
TZA1048TH 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:4-channel BTL driver for CD/DVD drives
TZA10-5 制造商:RHOMBUS-IND 制造商全稱:Rhombus Industries Inc. 功能描述:TZA / TYA Series 5-Tap High Performance Passive Delay Modules
TZA10-7 制造商:RHOMBUS-IND 制造商全稱:Rhombus Industries Inc. 功能描述:TZA / TYA Series 5-Tap High Performance Passive Delay Modules
TZA1-10 制造商:RHOMBUS-IND 制造商全稱:Rhombus Industries Inc. 功能描述:TZA / TYA Series 5-Tap High Performance Passive Delay Modules
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*