參數資料
型號： TWL2213CAPFBR
廠商： TEXAS INSTRUMENTS INC
元件分類： 電源管理
英文描述： 1-CHANNEL POWER SUPPLY SUPPORT CKT, PQFP48
封裝： PLASTIC, TQFP-48
文件頁數： 32/33頁
文件大小： 498K
代理商： TWL2213CAPFBR
TWL2213CA
POWER SUPPLY MANAGEMENT IC AND
Li-Ion BATTERY CHARGE CONTROL
SLVS280 – MARCH 2001
8
POST OFFICE BOX 655303
DALLAS, TEXAS 75265
detailed description (continued)
CD1
Delay
0.9 VOUT
Hysteresis
To keep power on condition PSH
VREG1
XRST
PSH
CD1
CD2
must be high within max CD2 delay.
Figure 3. VREG1 Monitoring of Reset Control
regulator 1
This regulator is automatically enabled after the power-on process is complete. It stays enabled until the
power-off condition occurs. Regulator 1 supplies power to the microprocessor. The nominal output voltage is
2.8 V, and the maximum output current is 150 mA. It requires an output capacitor in the range of 4.7
F–10 F
with an equivalent serial resistance (ESR) less than 6
.
regulator 6
This regulator output voltage can be enabled by I2C/SPI by attaching the CONT terminal to VDD. Attaching
CONT to GND makes this regulator automatically enabled with power on. The output voltage is programmed
by I2C/SPI. The maximum out current of 100 mA requires an output capacitor in range of 4.7
F–10 F, with
ESR in the range of 1
–6 . The output voltage ranges from 2.5 V to 3 V.
regulators 2, 3, 4, and 5
Regulators 2, 3, 4, and 5 are output voltages programmed and enabled by I2C. The output voltage ranges from
2.3 V to 3 V in 100-mV steps. The maximum output current for regulators 2 and 3 is 80 mA, for regulator 4 it
is 120 mA, and for regulator 5 it is 150 mA. The default output voltage for all regulators is 3 V. These regulators
have very low output noise; this noise level is suitable for powering up the RF block, which requires an output
capacitor in the range of 4.7
F–10 F with an ESR less than 6 .
vibrator driver
The TWL2213 device has incorporated a vibrator driver with selectable output voltage and current. This
integrated vibrator driver has the same feature as the other load dropout (LDO) regulators. The vibrator is
enabled by I2C. The output voltage can be selected by tying the SEL terminal to VDD or GND. If the SEL terminal
is tied to VDD, the output voltage is set to 3 V. If the SEL terminal is tied to GND, the output voltage is set to 1.3
V.
相關PDF資料
PDF描述
TWL2214CAGQER 1-CHANNEL POWER SUPPLY SUPPORT CKT, PBGA48
TWL2214CAPFB 1-CHANNEL POWER SUPPLY SUPPORT CKT, PQFP48
TX810IRHHT SPECIALTY ANALOG CIRCUIT, PQCC36
TX810IRHHR SPECIALTY ANALOG CIRCUIT, PQCC36
TZA1031HL SPECIALTY CONSUMER CIRCUIT, PQFP64
相關代理商/技術參數
參數描述
TWL2214CA 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Power Supply Management IC and Li-Ion Battery Charge Control
TWL2214CAPFB 制造商:Rochester Electronics LLC 功能描述:POWER SUPPLY MANAGEMENT IC:LION - Bulk 制造商:Texas Instruments 功能描述:CHGR LI-ION/LI-POL 150MA 2.8V 48TQFP - Tape and Reel
TWL2214CAPFBR 制造商:Rochester Electronics LLC 功能描述:POWER SUPPLY MANAGEMENT IC:LION - Bulk 制造商:Texas Instruments 功能描述:CHGR LI-ION/LI-POL 150MA 2.8V 48TQFP - Tape and Reel
TWL2217CGGMR 制造商:Texas Instruments 功能描述:
TWL2217CZQER 制造商:Texas Instruments 功能描述:
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*