
SLES141G
– JULY 2005 – REVISED APRIL 2011
Table 2-16. Operation Mode Control Register
Subaddress
03h
Default
00h
7
6
5
4
3
2
1
0
Reserved
H-PLL response time
Reserved
Power save
H-PLL response time
00 = Adaptive (default)
01 = Reserved
10 = Fast
00 = Normal
When in the Normal mode, the horizontal PLL (H-PLL) response time is set to its slowest setting. This mode improves noise immunity
and provides a more stable output line frequency for standard TV signal sources (for example, TV tuners, DVD players, video
surveillance cameras, etc.).
When in the Fast mode, the H-PLL response time is set to its fastest setting. This mode enables the H-PLL to respond more quickly to
large variations in the horizontal timing (for example, VCR head switching intervals). This mode is recommended for VCRs and also
cameras locked to the AC power-line frequency.
When in the Adaptive mode, the H-PLL response time is automatically adjusted based on the measured horizontal phase error. In this
mode, the H-PLL response time typically approaches its slowest setting for most standard TV signal sources and approaches its fastest
setting for most VCR signal sources.
Power save
0 = Normal operation (default)
1 = Power save mode. Reduces the clock speed of the internal processor and switches off the ADCs. I2C interface is active and all
current operating settings are preserved.
Table 2-17. Autoswitch Mask Register
Subaddress
04h
Default
23h
7
6
5
4
3
2
1
0
Reserved
SECAM
NTSC 4.43
(Nc) PAL
(M) PAL
PAL
(M, J) NTSC
Autoswitch mode mask
Limits the video formats between which autoswitch is possible.
SECAM
0 = Autoswitch does not include SECAM
1 = Autoswitch includes SECAM (default)
NTSC 4.43
0 = Autoswitch does not include NTSC 4.43 (default)
1 = Autoswitch includes NTSC 4.43
(Nc) PAL
0 = Autoswitch does not include (Nc) PAL (default)
1 = Autoswitch includes (Nc) PAL
(M) PAL
0 = Autoswitch does not include (M) PAL (default)
1 = Autoswitch includes (M) PAL
PAL
0 = Reserved
1 = Autoswitch includes (B, D, G, H, I, N) PAL (default)
(M, J) NTSC
0 = Reserved
1 = Autoswitch includes (M, J) NTSC (default)
Note: Bits 1 and 0 must always be 11b.
44
Functional Description
Copyright
2005–2011, Texas Instruments Incorporated