![](http://datasheet.mmic.net.cn/370000/TAS5028PAGR_datasheet_16735503/TAS5028PAGR_43.png)
Electrical Specifications
35
SLES112 — June 2004
TAS5028
3
Electrical Specifications
3.1
Absolute Maximum Ratings
UNITS
Supply voltage, DVDD and DVD_PWM
-0.3 V to 3.6 V
Supply voltage, AVDD_PLL
-0.3 V to 3.6 V
3.3-V digital input
5 V tolerant
(2)
digital input
1.8 V LVCMOS
(3)
-0.5 V to DVDD + 0.5 V
Input voltage
-0.5 V to 6 V
-0.5 V to VREF
(1)
+ 0.5 V
±
20 mA
±
20 mA
0
°
C to 70
°
C
-65
°
C to 150
°
C
Input clamp current, I
IK
(V
I
< 0 or V
I
> 1.8 V
Output clamp current, I
OK
(V
O
< 0 or V
O
> 1.8 V)
Operating free air temperature
Storage temperature range, T
stg
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES:
1. VREF is a 1.8-V supply derived from regulators internal to the TAS5028 chip. VREF is on terminals VRA_PLL, VRD_PLL, VR_DPLL,
VR_DIG, and VR_PWM. These terminals are provided to permit use of external filter capacitors, but should not be used to source
power to external devices.
2. 5-V tolerant inputs are RESET, PDN, MUTE, HP_SEL, SCLK, LRCLK, MCLK, SDIN1, SDIN2, SDIN3, SDIN4, SDA, and SCL.
3. VRA_PLL, VRD_PLL, VR_DPLL, VR_DIG, VR_PWM
DISSIPATION RATING TABLE (High-k Board, 105 C Junction)
T
A
≤
25 C
POWER RATING
ABOVE T
A
= 25 C
1869 mW
23.36 mW/
°
C
PACKAGE
DERATING FACTOR
T
A
= 70 C
POWER RATING
PAG
818 mW
3.2
Dynamic Performance (At Recommended Operating Conditions at 25 C)
PARAMETER
TEST CONDITIONS
MIN
NOM
MAX
UNITS
Dynamic range 32 kHz to 192 kHz
TAS5028 + TAS5111 A-weighted
102
dB
Total harmonic distortion
TAS5111 A at 1 W
0.1%
TAS5028 ouput
0.01%
±
0.1
±
0.2
Frequency response
32-kHz to 96-kHz sample rates
dB
176.4, 192-kHz sample rates
3.3
Recommended Operating Conditions (Over 0 C to 70 C)
MIN
NOM
MAX
UNITS
Digital supply voltage, DVDD and DVDD_PWM
3
3.3
3.6
V
Analog supply voltage, AVDD_PLL
3
3.3
3.6
V
3.3 V
5-V tolerant
(4)
2
High-level input voltage, V
High level input voltage, V
IH
2
V
1.8-V LVCMOS (XTL_IN)
1.26
3.3 V
5-V tolerant
(4)
0.8
Low-level input voltage, V
Low level input voltage, V
IL
0.8
V
1.8-V (XTL_IN)
0.54
Operating ambient air temperature range, T
A
Operating junction temperature range, T
J
NOTE 4: 5-V tolerant inputs are SDA, SCL, RESET, PDN, MUTE, HP_SEL, SCLK, LRCLK, MCLK, SDIN1, SDIN2, SDIN3, and SDIN4.
-20
25
70
°
C
°
C
-20
105