- 您現在的位置：買賣IC網 > PDF目錄8593 > SY88993VKC (Micrel Inc)IC AMP POST 5/3.3V HS TTL 10MSOP PDF資料下載
參數資料
| 型號： | SY88993VKC |
| 廠商： | Micrel Inc |
| 文件頁數： | 6/8頁 |
| 文件大?。?/td> | 0K |
| 描述： | IC AMP POST 5/3.3V HS TTL 10MSOP |
| 標準包裝： | 100 |
| 類型： | 限幅后置放大器 |
| 應用： | 光纖學網絡 |
| 安裝類型： | 表面貼裝 |
| 封裝/外殼： | 10-TFSOP，10-MSOP（0.118"，3.00mm 寬） |
| 供應商設備封裝： | 10-MSOP |
| 包裝： | 管件 |
Micrel, Inc.
SY56216R
November 2010
6
M9999-111810-A
hbwhelp@micrel.com
Interface Applications
For Input Interface Applications see Figures 4a
through 4e. For CML Output Termination see Figures
5a through 5d
CML Output Termination with VCCO 1.2V
For VCCO of 1.2V, Figure 5a, terminate the output
with 50-to-1.2V, DC coupled, not 100 differentially
across the outputs.
If AC-coupling is used, Figure 5d, terminate into 50-
to-1.2V before the coupling capacitor and then
connect to a high value resistor to a reference voltage.
Do not AC couple with internally terminated receiver.
For example, 50 ANY-IN input. AC-coupling will
offset the output voltage by 200mV and this offset
voltage will be too low for proper driver operation. Any
unused output pair needs to be terminated when
VCCO is 1.2V, do not leave floating.
CML Output Termination with 1.8V/2.5V VCCO
For VCCO of 1.8V or 2.5V, Figure 5a and Figure 5b,
terminate
with
either
50-to-VCCO
or
100
differentially across the outputs. AC- or DC-coupling is
fine. See Figure 5c for AC-coupling.
Input AC-Coupling
The SY56216R input can accept AC-coupling from
any driver. Bypass VT with a 0.1F low ESR capacitor
to VCC as shown in Figures 4b and 4c. VT has an
internal high impedance resistor divider as shown in
Figure 2a, to provide a bias voltage for AC-coupling.
Input Termination
From 1.8V CML driver. Terminate with VT tied to 1.8V.
Do not terminate 100 ohms differentially.
From 2.5V CML driver. Terminate with either VT tied
to 2.5V or 100 ohms differentially.
The input cannot be DC-coupled from a 1.2V CML
driver.
Timing Diagrams
Figure 1. Propagation Delay
or (408) 955-1690
相關PDF資料 |
PDF描述 |
|---|---|
| VE-B6F-MV-B1 | CONVERTER MOD DC/DC 72V 150W |
| VI-233-MY-B1 | CONVERTER MOD DC/DC 24V 50W |
| LTC2605CGN#TRPBF | IC DAC 16BIT OCT I2C 16-SSOP |
| VE-B60-MV-B1 | CONVERTER MOD DC/DC 5V 150W |
| VE-BNZ-MY-B1 | CONVERTER MOD DC/DC 2V 20W |
相關代理商/技術參數 |
參數描述 |
|---|---|
| SY88993VKC TR | 功能描述:IC AMP POST 5/3.3V HS TTL 10MSOP RoHS:否 類別:集成電路 (IC) >> 線性 - 放大器 - 專用 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:60 系列:- 類型:可變?cè)鲆娣糯笃?應用:CATV 安裝類型:表面貼裝 封裝/外殼:20-WQFN 裸露焊盤 供應商設備封裝:20-TQFN-EP（5x5） 包裝:托盤 |
| SY88993VKCTR | 制造商:MICREL 制造商全稱:Micrel Semiconductor 功能描述:5V/3.3V 3.2Gbps HIGH-SPEED LIMITING POST AMPLIFIER |
| SY88993VKG | 功能描述:限幅放大器 3.3V-5V 3.2 Gbps CML Post Amp:1xLOS gain/1xTC/10 MSOP/ Com’l/Bulk (I Temp, Green) RoHS:否 制造商:Micrel 輸入電壓范圍（最大值）:3.6 V 工作電源電壓:3.3 V 電源電流:40 mA 工作溫度范圍:- 40 C to + 85 C 封裝 / 箱體:MSOP-10 封裝:Tube |
| SY88993VKG TR | 制造商:Micrel Inc 功能描述:IC POST AMP CML LIMITING 10-MSOP 制造商:Micrel Inc 功能描述:SY88993 Series 3.3 - 5 V 3.2 Gbps PECL(in) CML(out) Post Amp - MSOP-10 |
| SY88993VKGTR | 制造商:MICREL 制造商全稱:Micrel Semiconductor 功能描述:5V/3.3V 3.2Gbps HIGH-SPEED LIMITING POST AMPLIFIER |
發布緊急采購，3分鐘左右您將得到回復。