- 您現在的位置：買賣IC網 > PDF目錄383837 > ST16C452IJ68PS (EXAR CORP) DUAL UART WITH PARALLEL PRINTER PORT PDF資料下載
參數資料
| 型號： | ST16C452IJ68PS |
| 廠商： | EXAR CORP |
| 元件分類： | 微控制器/微處理器 |
| 英文描述： | DUAL UART WITH PARALLEL PRINTER PORT |
| 中文描述： | 2 CHANNEL(S), 1.5M bps, SERIAL COMM CONTROLLER, PQCC68 |
| 封裝： | PLASTIC, LCC-68 |
| 文件頁數： | 19/30頁 |
| 文件大小： | 162K |
| 代理商： | ST16C452IJ68PS |
第1頁第2頁第3頁第4頁第5頁第6頁第7頁第8頁第9頁第10頁第11頁第12頁第13頁第14頁第15頁第16頁第17頁第18頁當前第19頁第20頁第21頁第22頁第23頁第24頁第25頁第26頁第27頁第28頁第29頁第30頁
19
ST16C452/452PS
Rev. 3.20
Scratchpad Register (SPR)
The ST16C452/452PS provides a temporary data
register to store 8 bits of user information.
PRINTER PORT REGISTER DESCRIPTIONS
Port Register (PR)
PR BIT 0-7:
Printer Data port (Bi-directional) - These pins are the
eight bit data bus for transferring information to or
from an external device (usually a printer). D0 is the
least significant bit. PD7-PD0 are latched during a
write cycle (output mode).
I/O Select Register (IOSEL) [452PS only]
This register is used in conjunction with the state of
BIDEN to set the direction (input/output) of the PD7-
PD0 data bus. This register is used only when BIDEN
is a logic 0.
Logic 55 (Hex) + BIDEN 0 = PD7-PD0 are set for
output mode
Logic AA (Hex) + BIDEN 0 = PD7-PD0 are set for input
mode
Status Register (SR)
This register provides the printer port input logical
states and the status of the interrupt -INTP based on
the condition of the -ACK printer port interface signal.
The logical state of these pins is dependent on exter-
nal interface signals.
SR BIT 1-0:
Not Used - initialized to a logic 1.
SR BIT-2:
Logic 0 = an interrupt is pending
When INTSEL is a logic 0, SR bit-2 basically tracks the
-ACK input interface pin (returns to a logic 1 when the
-ACK input returns to a logic 1). However when
INTSEL is a logic 1, the latched mode is selected, SR
bit-2 goes to a logic 0 with the -ACK input but does not
return to a logic 1 until the end of the read cycle, i.e.,
reading SR will set this bit to a logic 1.
Logic 1 = no interrupt is pending. (normal inactive
state)
SR BIT-3:
Logic 0 = -ERROR input is a logic 0.
Logic 1 = -ERROR input is a logic 1. (normal inactive
state)
SR BIT-4:
Logic 0 = SLCT input is a logic 0. (normal inactive
state)
Logic 1 = SLCT input is a logic 1.
SR BIT-5:
Logic 0 = PE input is a logic 0. (normal inactive state)
Logic 1 = PE input is a logic 1.
SR BIT-6:
Logic 0 = -ACK input is a logic 0.
Logic 1 = -ACK input is a logic 1. (normal inactive
state)
SR BIT-7:
Logic 0 = BUSY input is a logic 0
Logic 1 = BUSY input is a logic 1 (normal inactive
state)
Command Register (COM)
This register provides the printer port input logical
states and the status of the printer interrupt INIT,
which is based on the state of CON bit-1.
COM BIT-0:
-STROBE is a bi-directional signal with an open
source driver and internal pull-up so that it may be
wire-or’d with other outputs. COM bit-1 is used to read
status while CON bit 1 is used to set an output state.
If it is to function as an input, CON bit-1 shall be set to
a logic 1 first.
Logic 0 = -STROBE pin is a logic 1. (normal default
condition)
Logic 1 = -STROBE pin is a logic 0.
COM BIT-1:
-AutoFDXT is a bi-directional signal with an open
source driver and internal pull-up so that it may be
wire-or’d with other outputs. COM bit-1 is used to read
status while CON bit 1 is used to set an output state.
If it is to function as an input, CON bit-1 shall be set to
相關PDF資料 |
PDF描述 |
|---|---|
| ST16C452CJ68 | Power Supply IC; Number of Outputs:1; Supply Voltage Max:5.5V; Package/Case:10-MSOP; Leaded Process Compatible:No; Output Current:150mA; Output Voltage Max:1.3V; Peak Reflow Compatible (260 C):No; Power Dissipation:481mW |
| ST16C452CJ68PS | Power Supply IC; Number of Outputs:1; Supply Voltage Max:5.5V; Package/Case:10-MSOP; Leaded Process Compatible:No; Output Current:150mA; Output Voltage Max:1.3V; Peak Reflow Compatible (260 C):No; Power Dissipation:481mW |
| ST16C452PS | Dual UART with Parallel Printer Port(雙通用異步接收器/發送器（帶并行打印機端口）) |
| ST16C452 | Dual UART with Parallel Printer Port(雙通用異步接收器/發送器（帶并行打印機端口）) |
| ST16C550 | UART with 16-Byte FIFO(通用異步接收器/發送器（帶16字節的先進先出）) |
相關代理商/技術參數 |
參數描述 |
|---|---|
| ST16C452IJ68PS-F | 功能描述:UART 接口集成電路 DUAL UART W/PARALEL PRINTER PORT RoHS:否 制造商:Texas Instruments 通道數量:2 數據速率:3 Mbps 電源電壓-最大:3.6 V 電源電壓-最小:2.7 V 電源電流:20 mA 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝 / 箱體:LQFP-48 封裝:Reel |
| ST16C452IJ68TR-F | 制造商:Exar Corporation 功能描述:UART 2-CH 3.3V/5V 68-Pin PLCC T/R 制造商:Exar Corporation 功能描述:ST16C452IJ68TR-F |
| ST16C452PS | 制造商:EXAR 制造商全稱:EXAR 功能描述:DUAL UART WITH PARALLEL PRINTER PORT |
| ST16C454 | 制造商:EXAR 制造商全稱:EXAR 功能描述:QUAD UNIVERSAL ASYNCHRONOUS RECEIVER/TRANSMITTER (UART) |
| ST16C454_05 | 制造商:EXAR 制造商全稱:EXAR 功能描述:QUAD UNIVERSAL ASYNCHRONOUS RECEIVER/TRANSMITTER (UART) |
發布緊急采購，3分鐘左右您將得到回復。