參數資料
型號： ST16654
廠商： Exar Corporation
英文描述： QUAD UART WITH 64-BYTE FIFO AND INFRARED (IrDA) ENCODER/DECODER
中文描述： 四UART的64字節FIFO和紅外線（IrDA）編碼/解碼器
文件頁數： 32/49頁
文件大?。?/td> 444K
代理商： ST16654
ST16C654/654D
5-96
Rev. 4.10
Table 8, SOFTWARE FLOW CONTROL FUNCTIONS
Cont-3
Cont-2
Cont-1
Cont-0
TX, RX software flow controls
0
1
0
1
X
X
X
1
0
0
1
1
X
X
X
0
X
X
X
X
0
1
0
1
X
X
X
X
0
0
1
1
No transmit flow control
Transmit Xon1/Xoff1
Transmit Xon2/Xoff2
Transmit Xon1 and Xon2/Xoff1 and Xoff2
No receive flow control
Receiver compares Xon1/Xoff1
Receiver compares Xon2/Xoff2
Transmit Xon1/ Xoff1.
Receiver compares Xon1 and Xon2,
Xoff1 and Xoff2
Transmit Xon2/Xoff2
Receiver compares Xon1 and Xon2/Xoff1 and Xoff2
Transmit Xon1 and Xon2/Xoff1 and Xoff2
Receiver compares Xon1 and Xon2/Xoff1 and Xoff2
No transmit flow control
Receiver compares Xon1 and Xon2/Xoff1 and Xoff2
0
1
1
1
1
1
1
1
0
0
1
1
EFR BIT-4:
Enhanced function control bit. The content of the IER
bits 4-7, ISR bits 4-5, FCR bits 4-5, and MCR bits 5-7
can be modified and latched. After modifying any bits
in the enhanced registers, EFR bit-4 can be set to a
logic 0 to latch the new values. This feature prevents
existing software from altering or overwriting the 654
enhanced functions.
Logic 0 = disable/latch enhanced features. IER bits 4-
7, ISR bits 4-5, FCR bits 4-5, and MCR bits 5-7 are
saved to retain the user settings, then IER bits 4-7, ISR
bits 4-5, FCR bits 4-5, and MCR bits 5-7 are initialized
to the default values shown in the Internal Resister
Table. After a reset, the IER bits 4-7, ISR bits 4-5, FCR
bits 4-5, and MCR bits 5-7 are set to a logic 0 to be
compatible with ST16C554 mode. (normal default
condition).
Logic 1 = Enables the enhanced functions. When this
bit is set to a logic 1 all enhanced features of the 654
are enabled and user settings stored during a reset will
be restored.
EFR BIT-5:
Logic 0 = Special Character Detect Disabled. (normal
default condition)
Logic 1 = Special Character Detect Enabled. The 654
compares each incoming receive character with Xoff-
2 data. If a match exists, the received data will be
transferred to FIFO and ISR bit-4 will be set to indicate
detection of special character. Bit-0 in the X-registers
corresponds with the LSB bit for the receive character.
When this feature is enabled, the normal software flow
control must be disabled (EFR bits 0-3 must be set to
a logic 0).
EFR BIT-6:
Automatic RTS may be used for hardware flow control
by enabling EFR bit-6. When AUTO RTS is selected,
an interrupt will be generated when the receive FIFO
is filled to the programmed trigger level and -RTS will
go to a logic 1 at the next trigger level. -RTS will return
to a logic 0 when data is unloaded below the next lower
trigger level (Programmed trigger level -1). The state
of this register bit changes with the status of the
hardware flow control. -RTS functions normally when
相關PDF資料
PDF描述
ST16C1450 2.97V TO 5.5V UART
ST16C1450CJ28 2.97V TO 5.5V UART
ST16C1450CP28 2.97V TO 5.5V UART
ST16C1450CQ48 2.97V TO 5.5V UART
ST16C1450IJ28 2.97V TO 5.5V UART
相關代理商/技術參數
參數描述
ST16-683 制造商:RFE 制造商全稱:RFE international 功能描述:TEMPERATURE COMPENSATING THERMISTORS ST Series: Surface Mount
ST1680N 制造商:n/a 功能描述:Diode, Reverse Polarity
ST16C1450 制造商:EXAR 制造商全稱:EXAR 功能描述:2.97V TO 5.5V UART
ST16C1450_05 制造商:EXAR 制造商全稱:EXAR 功能描述:2.97V TO 5.5V UART
ST16C1450CJ28 制造商:Rochester Electronics LLC 功能描述: 制造商:Exar Corporation 功能描述:
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*