
Publication Number
S71PL254/127/064/032J_00
Revision
A
Amendment
6
Issue Date
November 22, 2004
ADVANCE
S71PL254/127/064/032J based MCPs
Stacked Multi-Chip Product (MCP) Flash Memory and RAM
256M/128/64/32 Megabit (16/8/4/2M x 16-bit) CMOS 3.0 Volt-only
Simultaneous Operation Page Mode Flash Memory and
64/32/16/8/4 Megabit (4M/2M/1M/512K/256K x 16-bit) Static
RAM/Pseudo Static RAM
Datasheet
Distinctive Characteristics
MCP Features
Power supply voltage of 2.7 to 3.1 volt
High performance
— 55 ns
— 65 ns (65 ns Flash, 70ns pSRAM)
Packages
— 7 x 9 x 1.2mm 56 ball FBGA
— 8 x 11.6 x 1.2mm 64 ball FBGA
— 8 x 11.6 x 1.4mm 84 ball FBGA
Operating Temperature
— –25°C to +85°C
— –40°C to +85°C
General Description
The S71PL series is a product line of stacked Multi-Chip Product (MCP) packages
and consists of:
One or more S29PL (Simultaneous Read/Write) Flash memory die
pSRAM or SRAM
The 256Mb Flash memory consists of two S29PL127J devices. In this case, CE#f2
is used to access the second Flash and no extra address lines are required.
The products covered by this document are listed in the table below:
Note:
Not recommended for new designs; use pSRAM based MCPs instead.
Flash Memory Density
32Mb
64Mb
128Mb
256Mb
pSRAM
Density
4Mb
S71PL032J40
8Mb
S71PL032J80
S71PL064J80
16Mb
S71PL032JA0
S71PL064JA0
S71PL127JA0
32Mb
S71PL064JB0
S71PL127JB0
S71PL254JB0
64Mb
S71PL127JC0
S71PL254JC0
Flash Memory Density
32Mb
64Mb
SRAM Density (Note)
4Mb
S71PL032J04
8Mb
S71PL032J08
S71PL064J08