參數資料
型號： PCF2113AUF4
廠商： NXP Semiconductors N.V.
英文描述： LCD controllers/drivers
中文描述： LCD控制器/驅動器
文件頁數： 26/72頁
文件大?。?/td> 332K
代理商： PCF2113AUF4
2001 Dec 19
26
Philips Semiconductors
Product specification
LCD controllers/drivers
PCF2113x
Table 6
Explanations of symbols used in Tables 4 and 5.
BIT
LOGIC STATE 0
LOGIC STATE 1
Co
DL
M (noimpact,
if SL = 1)
SL
H
I/D
S
D
C
B
last control byte; see Table 4
4 bits
1-line by 24 display
another control byte follows after data/command
8 bits
2-line by 12 display
MUX 1 : 18 (1
×
24 or 2
×
12 character display)
use basic instruction set
decrement
display freeze
display off
cursor off
cursor character blink off; character at cursor
position does not blink
cursor move
left shift
left/right screen: standard connection
1st 12 characters of 24; columns are from 1 to 60
2nd 12 characters of 24; columns are from 1 to 60 2nd 12 characters of 24; columns are from 60 to 1
column data: left to right; column data is displayed
from 1 to 60
row data; top to bottom; row data is displayed from
1 to 16 and icon row data is in 17 and 18
character mode; full display
icon blink disabled
direct mode disabled
set V
A
MUX 1 : 9 (1
×
12 character display)
use extended instruction set
increment
display shift
display on
cursor on
cursor character blink on; character at cursor
position blinks
display shift
right shift
left/right screen; mirrored connection
1st 12 characters of 24; columns are from 1 to 60
S/C
R/L
L (no impact,
if M = 1 or
SL = 1)
P
column data; right to left; column data is displayed
from 60 to 1
row data; bottom to top; row data is displayed
from 16 to 1 and icon row data is in 18 and 17
icon mode; only icons displayed
icon blink enabled
direct mode enabled
set V
B
Q
IM
IB
DM
V
8.1
Clear display
‘Clear display’ writes character code 20H into all DDRAM
addresses (the character pattern for character code 20H
must be a blank pattern), sets the DDRAM address
counter to logic 0 and returns the display to its original
position, if it was shifted. Thus, the display disappears and
the cursor or blink position goes to the left edge of the
display. Sets entry mode I/D = 1 (increment mode). S of
entry mode does not change.
The instruction ‘clear display’ requires extra execution
time. This may be allowed by checking the Busy Flag (BF)
or by waiting until the 165 clock cycles have elapsed.
The latter must be applied where no read-back options are
foreseen, as in some Chip-On-Glass (COG) applications.
8.2
Return home
‘Return home’ sets the DDRAM address counter to logic 0
and returns the display to its original position if it was
shifted. DDRAM contents do not change. The cursor or
blink position goes to the left of the first display line.
I/D and S of entry mode do not change.
相關PDF資料
PDF描述
PCF2113WUF4 LCD controllers/drivers
PCF2113AU10 RECTIFIER SBR DUAL 20A 60V 180A-ifsm 650mV-vf 0.5mA-ir TO-220AB 50/TUBE
PCF2113EU2 LCD controllers/drivers
PCF2113EUF4 LCD controllers/drivers
PCF2113A LCD controller/driver
相關代理商/技術參數
參數描述
PCF2113D 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:LCD controller/driver
PCF2113DH 制造商:NXP Semiconductors 功能描述:18 X 60 DOTS DOT MAT LCD DRVR AND DSPL CTLR, PQFP100
PCF2113DH/4 功能描述:LCD 驅動器 I2C LCD CHARCTR DRVR RoHS:否 制造商:Maxim Integrated 數位數量:4.5 片段數量:30 最大時鐘頻率:19 KHz 工作電源電壓:3 V to 3.6 V 最大工作溫度:+ 85 C 最小工作溫度:- 20 C 封裝 / 箱體:PDIP-40 封裝:Tube
PCF2113DH/4,557 功能描述:LCD 驅動器 I2C LCD CHARCTR DRVR RoHS:否 制造商:Maxim Integrated 數位數量:4.5 片段數量:30 最大時鐘頻率:19 KHz 工作電源電壓:3 V to 3.6 V 最大工作溫度:+ 85 C 最小工作溫度:- 20 C 封裝 / 箱體:PDIP-40 封裝:Tube
PCF2113DH/F2 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:LCD controller/driver
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*