
4
PI5V330A
Low On-Resistance Wideband/Video
Quad 2-Channel Mux/DeMux
PS8695A
02/22/08
Denitions
Symbol
Description
RON
Resistance between source and drain with switch in the ON state.
IO
Output leakage current measured at S1, S2, and D with the switch OFF.
VIN
Digital voltage at the IN pin that selects between S1 and S2 analog inputs.
VEN
A voltage that ENABLES the chip.
CIN
Capacitance at the digital inputs.
COFF
Capacitance at analog I/O (S1, S2, D) with switch OFF.
CON
Capacitance at analog I/O (S1, S2, D) with switch ON.
VIH
Minimum input voltage for logic HIGH.
VIL
Minimum input voltage for logic LOW.
IIH (IIL)
Input current of the digital input.
IOS
Minimum short circuit current for S1, S2 and D.
tON
Propagation delay measured between 50% of the digital input to 90% of the analog output when switch is turned
ON. The peak analog voltage is 0.714V.
tOFF
Propagation delay measured between 50% of the digital input to 90% of the analog output when switch is turned
OFF. The peak analog voltage is 0.714V.
BW
Frequency response of the switch in the ON state measured at 3dB down.
XTALK
Is an unwanted signal coupled from channel to channel. Measured in –dB. XTALK = 20 LOG VOUT/VIN. This is
non-adjacent crosstalk.
DG
Differential gain is the difference measurement between two bias levels, for instance analog input signals of 0V
to 0.714V.
DP
Differential phase is the difference measurement between two bias levels, for instance analog input signals of 0V
to 0.714V.
OIRR
Off isolation is the resistance (measured in –dB) between the input and output with the switch off (NO).
08-0288