參數資料
型號： MC28U512HACA
廠商： SAMSUNG SEMICONDUCTOR CO. LTD.
英文描述： MultiMediaCard Specification
中文描述： 多媒體卡規格
文件頁數： 36/66頁
文件大?。?/td> 1422K
代理商： MC28U512HACA
MultiMediaCard
TM
36
Figure 4-3 MultiMediaCard State Diagram
(Data Transfer Mode)
The command SELECT_DESELECT_CARD (CMD7) is used to select one card and place it in the
Transfer State. If a previously selected card is in the Transfer State its connection with the host is
released and it will move back to the Stand-by State. Only one card can be, at any time, in the Transfer
State. A selected card is responding the CMD7, the deselected one does not respond to this command.
When CMD7 is sent including the reserved relative card address “0x0000”, all cards transfer back to
Stand-by State. This command is used to identify new cards without resetting other already acquired
cards. Cards to which an RCA has already been assigned, do not respond to the identification
command flow in this state. All the data communication in the Data Transfer Mode is consequently a
point-to point communication between the host and the selected card (using addressed commands).
All addressed commands are acknowledged by a response on the CMD line. All read commands (data
is sent from the card via data lines) can be interrupted at any time, by a stop command. The data
transfer will terminate and the card will stop or start working on the next command. The DAT bus line
signal level is high when no data is transmitted. A transmitted data block consists of a start bit (LOW),
followed by a continuous data stream.
The data stream contains the net payload data (and error correction bits if an off-card ECC is used).
The data stream ends with an end bit (HIGH). The data transmission is synchronous to the clock signal.
The payload for block-oriented data transfer is preserved by a CRC check sum (refer to Chapter
“Cyclic Redundancy Check (CRC)”).
4.9.1 Block Read
The basic unit of data transfer is a block whose maximum size is defined in the CSD
(READ_BLK_LEN). A CRC is appended to the end of each block ensuring data transfer integrity.
READ_SINGLE_BLOCK (CMD17) starts a block read and after a complete transfer the card goes back
to Transfer State. READ_MULTIPLE_BLOCK (CMD18) starts a transfer of several consecutive blocks.
Two types of multiple block read transactions are defined (the host can use either one at any time):
* Open-ended Multiple block read : The number of blocks for the read multiple block operation is not
相關PDF資料
PDF描述
MC28U512NACA The HFC-S mini is not recommended for new projects. Please use XHFC-1SU instead.
MC2DU016HACA MultiMediaCard Specification
MC2DU016NACA MultiMediaCard Specification
MC2DU032HACA MultiMediaCard Specification
MC2DU032NACA MultiMediaCard Specification
相關代理商/技術參數
參數描述
MC290 制造商:LEDTRN 功能描述: 制造商:LEDtronics Inc 功能描述:
MC-290B 制造商:Panasonic Industrial Company 功能描述:BELT
MC29359 制造商:SPC Multicomp 功能描述:TERMINAL BUTT SPLICE CRIMP 制造商:SPC Multicomp 功能描述:TERMINAL, BUTT SPLICE, CRIMP 制造商:SPC Multicomp 功能描述:TERMINAL, BUTT SPLICE, CRIMP; Connector Type:Butt Splice; Series:-; Termination Method:Crimp; Wire Size AWG Min:22AWG; Wire Size AWG Max:16AWG; Contact Plating:Tin; Insulator Material:Uninsulated; Wire Size (AWG):22AWG to 16AWG ;RoHS Compliant: Yes
MC29360 制造商:SPC Multicomp 功能描述:TERMINAL BUTT SPLICE CRIMP 制造商:SPC Multicomp 功能描述:TERMINAL, BUTT SPLICE, CRIMP 制造商:SPC Multicomp 功能描述:TERMINAL, BUTT SPLICE, CRIMP; Connector Type:Butt Splice; Series:-; Termination Method:Crimp; Wire Size AWG Min:22AWG; Wire Size AWG Max:16AWG; Contact Plating:Nickel; Insulator Material:Uninsulated; Wire Size (AWG):22AWG to 16AWG ;RoHS Compliant: Yes
MC29361 制造商:SPC Multicomp 功能描述:TERMINAL BUTT SPLICE CRIMP 制造商:SPC Multicomp 功能描述:TERMINAL, BUTT SPLICE, CRIMP 制造商:SPC Multicomp 功能描述:TERMINAL, BUTT SPLICE, CRIMP; Connector Type:Butt Splice; Series:-; Termination Method:Crimp; Wire Size AWG Min:16AWG; Wire Size AWG Max:14AWG; Contact Plating:Tin; Insulator Material:Uninsulated; Wire Size (AWG):16AWG to 14AWG ;RoHS Compliant: Yes
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*