
M16C/30P Group
1. Overview
Rev.1.22
REJ03B0088-0122
Mar 30, 2007
Page 2 of 53
1.2
Performance Outline
Table 1.1 lists Performance Outline of M16C/30P Group.
NOTES:
1. I
2
C bus is a registered trademark of Koninklijke Philips Electronics N. V.
2. IEBus is a registered trademark of NEC Electronics Corporation.
3. Use the M16C/30P on VCC1 = VCC2.
Table 1.1
Performance Outline of M16C/30P Group
Item
Number of Basic Instructions 91 instructions
Minimum Instruction
Execution Time
Operation Mode
Performance
CPU
62.5ns(f(XIN)=16MHz, VCC1=VCC2=3.0 to 5.5V, no wait)
100ns(f(XIN)=10MHz, VCC1=VCC2=2.7 to 5.5V, no wait)
Single-chip, memory expansion and microprocessor
mode
1 Mbyte
See
Table 1.2 Product List
Input/Output : 87 pins, Input : 1 pin
Timer A : 16 bits x 3 channels,
Timer B : 16 bits x 3 channels
1 channels
Clock synchronous, UART, I
2
CBus
(1)
, IEBus
(2)
2 channels
Clock synchronous, UART, I
2
CBus
(1)
10-bit A/D converter: 1 circuit, 18 channels
2 channels
CCITT-CRC
15 bits x 1 channel (with prescaler)
Internal: 20 sources, External: 7 sources, Software: 4
sources, Priority level: 7 levels
2 circuits
Main clock generation circuit (*),
Subclock generation circuit (*),
(*)Equipped with a built-in feedback resistor.
VCC1=VCC2=3.0 to 5.5 V (f(XIN)=16MHz)
VCC1=VCC2=2.7 to 5.5 V (f(XIN)=10MHz, no wait)
10 mA (VCC1=VCC2=5V, f(XIN)=16MHz)
8 mA (VCC1=VCC2=3V, f(XIN)=10MHz)
1.8
μ
A (VCC1=VCC2=3V, f(XCIN)=32kHz, wait mode)
0.7
μ
A(VCC1=VCC2=3V, stop mode)
3.3±0.3 V or 5.0±0.5 V
Memory Space
Memory Capacity
Port
Multifunction Timer
Peripheral
Function
Serial Interface
A/D Converter
DMAC
CRC Calculation Circuit
Watchdog Timer
Interrupt
Clock Generating Circuit
Electric
Characteristics
Supply Voltage
Power Consumption
One time flash
version
Flash memory
version
Program Supply Voltage
Program/Erase Supply
Voltage
Program and Erase
Endurance
3.3±0.3 V or 5.0±0.5 V
100 times (all area)
Operating Ambient Temperature
Package
-20 to 85
°
C, -40 to 85
°
C
100-pin plastic mold QFP, LQFP