- 您現在的位置：買賣IC網 > PDF目錄44996 > LTC4097EDDB (LINEAR TECHNOLOGY CORP) 2-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO12 PDF資料下載
參數資料
| 型號： | LTC4097EDDB |
| 廠商： | LINEAR TECHNOLOGY CORP |
| 元件分類： | 電源管理 |
| 英文描述： | 2-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO12 |
| 封裝： | 3 X 2 MM, 0.75 MM HEIGHT, PLASTIC, DFN-12 |
| 文件頁數： | 19/20頁 |
| 文件大小： | 219K |
| 代理商： | LTC4097EDDB |
LTC4097
8
4097f
PIN FUNCTIONS
DCIN (Pin 1): Wall Adapter Input Supply Pin. Provides
power to the battery charger. The maximum supply
current is 1.2A. This pin should be bypassed with a 1F
capacitor.
USBIN (Pin 2): USB Input Supply Pin. Provides power to
the battery charger. The maximum supply current is 1A.
This pin should be bypassed with a 1F capacitor.
VNTC (Pin 3): Output Bias Voltage for NTC. A resistor
from this pin to the NTC pin sets up the bias for an NTC
thermistor. When the DCIN or USBIN pin voltage is sufcient
to begin charging (i.e. when the DCIN or USBIN supply
is greater than the undervoltage lockout thresholds and
at least 100mV or 150mV, respectively, above the battery
terminal), the VNTC pin is connected to the appropriate
input through an internal P-channel MOSFET. If sufcient
voltage to charge is not present on DCIN or USBIN the
VNTC pin is high impedance. This output can source up
to 120mA.
CHRG (Pin 4): Open-Drain Charge Status Output. When
the LTC4097 is charging, the CHRG pin is pulled low by an
internal N-channel MOSFET. When the charge cycle is com-
pleted, CHRG becomes high impedance. This output can
sink up to 10mA, making it suitable for driving a LED.
SUSP (Pin 5): Charge Enable Input. A logic low on this
pin enables the charger. If left oating, an internal 3.4MΩ
pull-down resistor defaults the LTC4097 to charge mode.
Pull this pin high for shutdown.
NTC (Pin 6): Input to the NTC (Negative Temperature
Coefcient) Thermistor Temperature Monitoring Circuit.
For normal operation, connect a thermistor from the NTC
pin to ground and a resistor of equal value from the NTC
pin to VNTC. When the voltage at this pin drops below
0.349 VNTC at hot temperatures or rises above
0.765 VNTC at cold, charging is suspended and the
CHRG pin output will keep the state in which it was be-
fore the event (low-Z or high-Z). Pulling this pin below
0.017 VNTC disables the NTC feature. There is approxi-
mately 2°C of temperature hysteresis associated with each
of the input comparator’s thresholds.
HPWR (Pin 7): HPWR Enable Input. Used to control the
amount of current drawn from the USB port. A logic high
on the HPWR pin sets the charge current to 100% of the
current programmed by the IUSB pin. A logic low on the
HPWR pin sets the charge current to 20% of the current
programmed by the IUSB pin. An internal 3.4MΩ pull-down
resistor defaults the HPWR pin to its low current state.
ITERM (Pin 8): Charge Termination Current Threshold
Program. The termination current threshold, ITERMINATE, is
set by connecting a resistor, RITERM, to ground. ITERMINATE
is set by the following formula:
I
V
R
TERMINATE
ITERM
=
100
When the battery current, IBAT, falls below the termination
threshold, charging stops and the CHRG output becomes
high impedance.
相關PDF資料 |
PDF描述 |
|---|---|
| LTC4098EUDC-1#TRPBF | BATTERY CHARGE CONTROLLER, 2650 kHz SWITCHING FREQ-MAX, PQCC20 |
| LTC4098EPDC-1#PBF | BATTERY CHARGE CONTROLLER, 2650 kHz SWITCHING FREQ-MAX, PQCC20 |
| LTC4098EUDC-1#PBF | BATTERY CHARGE CONTROLLER, 2650 kHz SWITCHING FREQ-MAX, PQCC20 |
| LTC4110EUHF#TR | 1-CHANNEL POWER SUPPLY SUPPORT CKT, PQCC38 |
| LTC4110EUHF | 1-CHANNEL POWER SUPPLY SUPPORT CKT, PQCC38 |
相關代理商/技術參數 |
參數描述 |
|---|---|
| LTC4097EDDB#PBF | 制造商:Linear Technology 功能描述:Battery Charger Li-Ion/Li-Pol 1200mA 4.2V 12-Pin DFN EP |
| LTC4097EDDB#TRMPBF | 功能描述:IC CHARGER LI-ION/POLY 12-DFN RoHS:是 類別:集成電路 (IC) >> PMIC - 電池管理 系列:- 標準包裝:2,000 系列:Impedance Track™ 功能:燃料，電量檢測計/監控器 電池化學:鋰離子（Li-Ion） 電源電壓:2.4 V ~ 2.6 V 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:20-TSSOP（0.173"，4.40mm 寬） 供應商設備封裝:20-TSSOP 包裝:帶卷 (TR) 產品目錄頁面:1020 (CN2011-ZH PDF) 配用:BQ27350EVM-ND - BQ27350EVM 其它名稱:296-21665-2 |
| LTC4097EDDB#TRPBF | 功能描述:IC CHARGER LI-ION/POLY 12-DFN RoHS:是 類別:集成電路 (IC) >> PMIC - 電池管理 系列:- 標準包裝:61 系列:- 功能:電源管理 電池化學:鋰離子（Li-Ion）、鋰聚合物（Li-Pol） 電源電壓:4.35 V ~ 5.5 V 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:22-WFDFN 裸露焊盤 供應商設備封裝:22-DFN（6x3）裸露焊盤 包裝:管件 |
| LTC4098 | 制造商:LINER 制造商全稱:Linear Technology 功能描述:Dual-Input Power Manager |
| LTC4098-1 | 制造商:LINER 制造商全稱:Linear Technology 功能描述:Dual-Input Power Manager |
發布緊急采購，3分鐘左右您將得到回復。